Dear Jonathan,
my vote would be to leave soil water terms unchanged and allow the use of "solid" in the atmosphere. There is sufficient difference between the behaviour of water in soil and in the atmosphere to justify, in my mind, this slight divergence in usage. After all, solid water from the atmosphere can only become frozen soil water, I believe, by melting, sinking into the soil and then re-freezing,
regards,
Martin
________________________________
From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of Jonathan Gregory <j.m.gregory at reading.ac.uk>
Sent: 06 April 2018 16:38
To: cf-metadata at cgd.ucar.edu
Subject: Re: [CF-metadata] CMIP6 data request: Precipitation of solid phase water
Dear Martin
I agree with you that frozen_precipitation_flux seems a bit more surprising in
some way than solid_precipitation_flux. If we put "solid" instead of "frozen",
should we change (by alias) the existing names that have "frozen", which are
frozen_water_content_of_soil_layer
lwe_thickness_of_frozen_water_content_of_soil_layer
mass_fraction_of_frozen_water_in_soil_moisture
mass_fraction_of_unfrozen_water_in_soil_moisture
soil_frozen_water_content
surface_frozen_carbon_dioxide_amount
volume_fraction_of_frozen_water_in_soil
I'm sure there must be others with useful comments to make about this.
Best wishes
Jonathan
----- Forwarded message from Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk> -----
> Date: Fri, 6 Apr 2018 15:06:15 +0000
> From: Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk>
> To: Jonathan Gregory <j.m.gregory at reading.ac.uk>
> Subject: Re: [CF-metadata] CMIP6 data request: Precipitation of solid phase
> water
>
> Dear Jonathan,
>
>
> It may be that the situation of interest in soil is a change brought about by decreasing temperature, and that the nature of the resulting substance is somewhat complex because of the matrix of soil that is carrying it. In the atmosphere I feel that applying the term "frozen" is a bit of a stretch, though I agree that it would be possible to state that as our intended meaning within the CF convention. On the other hand, we already use "liquid" (as in cloud_liquid_water) and "vapor" for the other two phases, so there is an argument for sticking to the standard partition solid/liquid/vapor.
>
>
> Taking your other comments into account, the term would be either "frozen_precipitation_flux" or "solid_precipitation_flux". "frozen_precipitation" looks misleading to me, but perhaps that is a matter of taste.
>
>
> As you say, it would be good to hear other opinions (I'll be on leave for the next few days, and will pick up the discussion at the end of next week),
>
>
> regards,
>
> Martin
>
>
>
> ________________________________
> From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of Jonathan Gregory <j.m.gregory at reading.ac.uk>
> Sent: 06 April 2018 14:38
> To: cf-metadata at cgd.ucar.edu
> Subject: Re: [CF-metadata] CMIP6 data request: Precipitation of solid phase water
>
> Dear Martin
>
> That's a good point about snow and ice. I think we should use modified help-
> text to make clear that "frozen water" means any form of solid water. I can't
> recall the reason for "frozen" rather than "solid" - I guess because it felt
> more obvious, if less systematic. I think I'm happy to understand "frozen
> water" as "water in the solid phase", however it got into that state. I wonder
> if others feel differently.
>
> Best wishes
>
> Jonathan
>
> ----- Forwarded message from Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk> -----
>
> > Date: Thu, 5 Apr 2018 17:29:08 +0000
> > From: Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk>
> > To: "cf-metadata at cgd.ucar.edu" <cf-metadata at cgd.ucar.edu>,
> > "j.m.gregory at reading.ac.uk" <j.m.gregory at reading.ac.uk>
> > Subject: Re: [CF-metadata] CMIP6 data request: Precipitation of solid phase
> > water
> >
> > Dear Jonathan,
> >
> >
> > I hadn't spotted the existing usage of frozen_water. My only reservation is that for such names the help text says '"frozen_water" means ice', which would exclude snow. The existing usages of "frozen_water" are all soil quantities for which the subtlety of the distinction between ice and snow is irrelevant. We could modify the help text for atmospheric variables, but is the term "frozen" appropriate for all solid phase water in the atmosphere? Freezing is a process of transforming to solid phase through a reduction in temperature, which might be considered inappropriate for some atmospheric ice and snow formation pathways ... I'm not sure about this, what do you think?
> >
> >
> > regards,
> >
> > Martin
> >
> >
> > ________________________________
> > From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of Jonathan Gregory <j.m.gregory at reading.ac.uk>
> > Sent: 05 April 2018 18:18
> > To: cf-metadata at cgd.ucar.edu
> > Subject: [CF-metadata] CMIP6 data request: Precipitation of solid phase water
> >
> > Dear Martin
> >
> > I agree with the need, but I note that the guidelines propose the phrase
> > frozen_water for solid water, and this is already used in several standard
> > names.
> >
> > Although "precipitation" is used in the world at large for species other than
> > water, so far in CF standard names it's used only for water. Hence we can omit
> > "water" for consistency.
> >
> > In view of these two points, would frozen_precipitation_flux be OK?
> >
> > Best wishes
> >
> > Jonathan
> >
> > ----- Forwarded message from Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk> -----
> >
> > > Date: Tue, 3 Apr 2018 11:46:50 +0000
> > > From: Martin Juckes - UKRI STFC <martin.juckes at stfc.ac.uk>
> > > To: "cf-metadata at cgd.ucar.edu" <cf-metadata at cgd.ucar.edu>
> > > Subject: [CF-metadata] CMIP6 data request: Precipitation of solid phase water
> > >
> > > Dear All,
> > >
> > >
> > > The CMIP6 data request includes a request for a variable representing the precipitation flux of water in a solid phase (including snow and ice). This variable was also in CMIP5. The current CMIP6 data request follows CMIP5 usage in adopting the standard name "snowfall_flux" for this variable, which is not really correct. There may have been a time when all solid precipitation in CMIP models was snow, but I think we need a more precise name now.
> > >
> > >
> > > We have "rainfall_flux" for precipitation of liquid phase water, but in other terms the construction "liquid_water" is used to refer to the liquid phase, e.g. "mass_concentration_of_liquid_water_in_air", so "solid_water" is a natural extension.
> > >
> > >
> > > I propose a new standard name for solid phase precipitation:
> > >
> > >
> > > precipitation_flux_of_solid_water [kg m-2 s-1]
> > >
> > > In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. "solid_water" refers to all forms of the solid phase of water.
> > >
> > >
> > > regards,
> > >
> > > Martin
> > > _______________________________________________
> > > CF-metadata mailing list
> > > CF-metadata at cgd.ucar.edu
> > > http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
> >
> > ----- End forwarded message -----
> > _______________________________________________
> > CF-metadata mailing list
> > CF-metadata at cgd.ucar.edu
> > http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
>
> ----- End forwarded message -----
> _______________________________________________
> CF-metadata mailing list
> CF-metadata at cgd.ucar.edu
> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
----- End forwarded message -----
_______________________________________________
CF-metadata mailing list
CF-metadata at cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
Received on Sat Apr 07 2018 - 00:49:49 BST
