PS I was already totally happy with adding sea_water_temperature_at_sea_floor
I have now retired but will continue to be active through an Emeritus Fellowship using this e-mail address.
________________________________
From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of Nan Galbraith <ngalbraith at whoi.edu>
Sent: 12 September 2019 17:13
To: cf-metadata at cgd.ucar.edu <cf-metadata at cgd.ucar.edu>
Cc: OceanSITES Data Management Team <oceansites-dmt at jcommops.org>
Subject: Re: [CF-metadata] new variable name request
Hi all -
I'd like to second (or third ... ) the request for new standard names for
sea_water_practical_salinity_at_sea_floor and
sea_water_temperature_at_sea_floor.
In the OceanSITES project, we deploy CTDs on mooring anchors, and it
would be good
to be able to find these records, among all the water temperature and
practical salinity
data sets on our servers. We supply a measurement depth, but it isn't
useful for this
search, since the water depth isn't mandatory in our format spec.
These records are not exactly on the sea floor, but within a few meters;
do we need to
apply some limit to the distance? I'm thinking about the various
sea_surface_temperature
variants, surface_skin and surface_subskin, but I'm assuming this isn't
needed for sea
floor measurements.
Thanks - Nan
On 9/10/19 1:59 PM, Lowry, Roy K. wrote:
> Hi again,
>
> I place great weight on the phrase 'where appropriate'. If a model
> works out electrical conductivity and then uses the PSS-78 algorithms
> to compute the salinity then using 'practical salinity' would be
> appropriate, but these are far from the norm!!! It's observational
> measurements where we really need to be careful about the types of
> salinity, but I've yet to see a measurements data set where bottom
> salinities are tagged differently from the salinities measured
> elsewhere in the water column. Consequently I don't see the need for
> the new name.
>
> Cheers, Roy.
>
> I have now retired but will continue to be active through an Emeritus
> Fellowship using this e-mail address.
>
>
> ------------------------------------------------------------------------
> *From:* Andrew Barna <abarna at ucsd.edu>
> *Sent:* 10 September 2019 18:47
> *Subject:* Re: [CF-metadata] new variable name request
> Thanks Roy,
>
> All the existing ?sea_water_salinity? names have the sentence "The
> more precise standard names should be used where appropriate for both
> modelled and observed salinities.? So it think it was worth the ask if
> they know.
>
> -Barna
>
> > On 2019-09-10, at 07:42, Lowry, Roy K. <rkl at bodc.ac.uk> wrote:
> >
> > Dear Barna,
> >
> > Perhaps the existing Standard Name would suffice for Cathy's needs
> as she is labelling model output and the models in my experience do
> not work to a specific measurement scale. This is because boundary
> condition and assimilation data sets can include measurements of more
> than one type in order to provide adequate coverage.
> >
> > Cheers, Roy.
> >
> >
> > From: CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of
> Andrew Barna <abarna at ucsd.edu>
> > Sent: 10 September 2019 18:23
> > Subject: Re: [CF-metadata] new variable name request
> >
> > Hi Cathy,
> >
> > There is already the name `sea_water_salinity_at_sea_floor` in the
> CF standard name list. However, if you know the scale you are
> calculating, a new name should be added to indicate this:
> > sea_water_practical_salinity_at_sea_floor if using PSS-78
> > or
> > sea_water_absolute_salinity_at_sea_floor if using TEOS-10
> >
> > I can come up with some definitions if you would like to have either
> of these proposed to the list.
> > -Barna
> >
> >
> > > On 2019-09-10, at 07:04, Cathy Smith <cathy.smith at noaa.gov> wrote:
> > >
> > > Thanks. I will use that variable.
> > >
> > > I also calculated salinity of the ocean floor. Same question.
> > >
> > > Cathy
> > >
> > > On 9/9/19 3:44 PM, Andrew Barna wrote:
> > >> Hi Cathy,
> > >>
> > >> There is the name `sea_water_potential_temperature_at_sea_floor`
> with the following definition:
> > >> Potential temperature is the temperature a parcel of air or sea
> water would have if moved adiabatically to sea level pressure. The
> potential temperature at the sea floor is that adjacent to the ocean
> bottom, which would be the deepest grid cell in an ocean model.
> > >>
> > >> From what I can tell, there is no ?in situ? sea water temperature
> name at the sea floor. I?d suggest the following name for this
> parameter with canonical units K:
> > >> `sea_water_temperature_at_sea_floor`
> > >>
> > >> Here is a possible definition basically modifying the above to
> remove the ?potential? parts:
> > >>
> > >> Sea water temperature is the in situ temperature of the sea
> water. The temperature at the sea floor is that adjacent to the ocean
> bottom, which would be the deepest grid cell in an ocean model.
> > >>
> > >> There should probably also be a modification of the existing
> sea_water_temperature definition to include this new name if it is
> accepted:
> > >>
> > >> The sentence:
> > >> "There are standard names for sea_surface_temperature,
> sea_surface_skin_temperature, sea_surface_subskin_temperature and
> sea_surface_foundation_temperature which can be used to describe data
> located at the specified surfaces.?
> > >>
> > >> Should be changed to:
> > >>
> > >> "There are standard names for sea_surface_temperature,
> sea_surface_skin_temperature, sea_surface_subskin_temperature,
> sea_surface_foundation_temperature, and
> sea_water_temperature_at_sea_floor which can be used to describe data
> located at the specified surfaces.?
> > >>
> > >> -Barna
> > >>
> > >>> On 2019-09-09, at 11:23, Cathy Smith <cathy.smith at noaa.gov> wrote:
> > >>>
> > >>> All
> > >>>
> > >>> I have a new variable request; bottom temperature. It is the
> temperature of the ocean floor (or the last level of a multi level
> ocean dataset). I searched and was unable to find it or a variable
> with "bottom" or synomyn as a level. I welcome being pointed out where
> I missed it.
> > >>>
> > >>> It is an important variable for fish and aquatic populations
> near coasts (or very shallow oceans).
> > >>>
> > >>> http://glossary.ametsoc.org/wiki/Bottom_temperature
> > >>>
> > >>> https://www.frontiersin.org/articles/10.3389/fmars.2019.00030/full
> > >>>
>
>
--
*******************************************************
* Nan Galbraith Information Systems Specialist *
* Upper Ocean Processes Group Mail Stop 29 *
* Woods Hole Oceanographic Institution *
* Woods Hole, MA 02543 (508) 289-2444 *
*******************************************************
_______________________________________________
CF-metadata mailing list
CF-metadata at cgd.ucar.edu
http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
This email and any attachments are intended solely for the use of the named recipients. If you are not the intended recipient you must not use, disclose, copy or distribute this email or any of its attachments and should notify the sender immediately and delete this email from your system.
UK Research and Innovation has taken every reasonable precaution to minimise risk of this email or any attachments containing viruses or malware but the recipient should carry out its own virus and malware checks before opening the attachments. UK Research and Innovation does not accept any liability for any losses or damages which the recipient may sustain due to presence of any viruses.
Opinions, conclusions or other information in this message and attachments that are not related directly to UK Research and Innovation business are solely those of the author and do not represent the views of UK Research and Innovation.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.cgd.ucar.edu/pipermail/cf-metadata/attachments/20190912/f3692127/attachment-0001.html>
Received on Thu Sep 12 2019 - 12:58:30 BST
