Good morning,
just a technical clarification: long names are not standardized within
cf, correct?
Indeed, typical long names don't follow the snake_case convention, but
are rather more free-form and human readable/understandable. They are
chosen by the user, often giving information beyond the standard names.
Examples from CMIP6 (Omon table, variables tos and tosga):
tos:
- standard name: sea_surface_temperature
- long name: Sea Surface Temperature
tosga:
- standard name: sea_surface_temperature
- long name: Global Average Sea Surface Temperature
Cheers
Klaus
On 13/03/2019 10:11, Dan Say wrote:
> Good morning,
>
>
> I am happy to go with the IUPAC names if needs be however, hfc is
> standard nomenclature and I would have thought the most likely term to
> be searched. I also note that there are already standard names for
> several HCFCs and CFCs, for which the standard names are
> 'mole_fraction_of_cfc11_in_air' etc. Nevertheless, see below a list of
> the requested standard/long names and definitions, using both?HFC and
> IUPAC nomenclature. I am happy for you to choose which ones we use,
> please advise.
>
>
> *HFC nomenclature:*
>
>
> Standard name: mole_fraction_of_hfc134a_in_air
>
> Long name:?mole_fraction_of_hfc134a_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc134a is?1,1,1,2-tetrafluoroethane.
>
>
> Standard name: mole_fraction_of_hfc143a_in_air
>
> Long name:?mole_fraction_of_hfc143a_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc143a is?1,1,1-trifluoroethane.
>
>
> Standard name: mole_fraction_of_hfc125_in_air
>
> Long name:?mole_fraction_of_hfc125_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc125 is?1,1,1,2,2-pentafluoroethane.
>
>
> Standard name: mole_fraction_of_hfc152a_in_air
>
> Long name:?mole_fraction_of_hfc152a_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc152a is?1,1-difluoroethane.
>
>
> Standard name: mole_fraction_of_hfc32_in_air
>
> Long name:?mole_fraction_of_hfc32_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc32 is?difluoromethane.
>
>
> Standard name: mole_fraction_of_hfc23_in_air
>
> Long name:?mole_fraction_of_hfc23_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.? The
> IUPAC name for hfc23 is trifluoromethane.
>
>
>
>
>
> *IUPAC nomenclature:*
>
>
> Standard name: mole_fraction_of_1,1,1,2-tetrafluoroethane_in_air
>
> Long name:?mole_fraction_of_1,1,1,2-tetrafluoroethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> 1,1,1,2-tetrafluoroethane is described by its common name, HFC-134a.
>
>
> Standard name: mole_fraction_of_1,1,1-trifluoroethane_in_air
>
> Long name:?mole_fraction_of_1,1,1-trifluoroethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> 1,1,1-trifluoroethane?is described by its common?name, HFC-143a.
>
>
> Standard name: mole_fraction_of_1,1,1,2,2-pentafluoroethane_in_air
>
> Long name:?mole_fraction_of_1,1,1,2,2-pentafluoroethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> 1,1,1,2,2-pentafluoroethane?is described by its common?name, HFC-125.
>
>
> Standard name: mole_fraction_of_1,1-difluoroethane_in_air
>
> Long name:?mole_fraction_of_1,1-difluoroethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> 1,1-difluoroethane?is described by its common?name, HFC-152a.
>
>
> Standard name: mole_fraction_of_difluoromethane_in_air
>
> Long name:?mole_fraction_of_difluoromethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> Difluoromethane?is described by its common?name, HFC-32.
>
>
> Standard name: mole_fraction_of_trifluoromethane_in_air
>
> Long name:?mole_fraction_of_trifluoromethane_in_air
>
> Definition:?Mole fraction is used in the construction
> mole_fraction_of_X_in_Y, where X is a material constituent of Y.?
> Trifluoromethane?is described by its common?name, HFC-23.
>
>
>
> Cheers,
>
>
> Dan
>
>
>
> */________________________________
> /*
> */
> /*
> *Dr?Daniel Say*
> Postdoctoral Research Associate
> Atmospheric Chemistry Research Group
> School of Chemistry
> University of Bristol
> Tel:?(+44) 117 3317042?
> ------------------------------------------------------------------------
> *From:* Lowry, Roy K. <rkl at bodc.ac.uk>
> *Sent:* 12 March 2019 17:17:12
> *To:* Dan Say; cf-metadata at cgd.ucar.edu
> *Subject:* Re: Addition of HFC standard names
> ?
> HI again,
>
> I'd prefer it to be somewhere in the Standard Name entry because that is
> searchable either through the XML document on the CF site or through the
> vocabulary servers handling Standard Names. That way your data gets
> discovered by other communities who might search for
> '1,1,1,2-tetrafluoroethane'.??I've dealt with quite a few oceanographic
> halocarbon data sets over the years, but had never come across the 'hfc'
> nomenclature before.
>
> To my knowledge the long name doesn't get scraped by data discovery
> systems. It is used more as usage metadata to help users better
> understand the measurements. By all means include the IUPAC name in the
> long name, but I would also keep the hfc synonym there.
>
> Cheers, Roy.
>
> I have now retired but will continue to be active through an Emeritus
> Fellowship using this e-mail address.
>
>
> ------------------------------------------------------------------------
> *From:* Dan Say <dan.say at bristol.ac.uk>
> *Sent:* 12 March 2019 16:59
> *To:* Lowry, Roy K.; cf-metadata at cgd.ucar.edu
> *Subject:* Re: Addition of HFC standard names
> ?
>
> Hi Roy,
>
>
> Would it make more sense to leave the standard name as suggested, but
> replace 'hfc134a' with '1,1,1,2-tetrafluoroethane' in the long name, for
> simplicity? This is my first venture into the CEDa archives so please
> advise, I am happy to change the long names if needs be.
>
>
> Cheers,
>
>
> Dan
>
>
> */________________________________
> /*
> */
> /*
> *Dr?Daniel Say*
> Postdoctoral Research Associate
> Atmospheric Chemistry Research Group
> School of Chemistry
> University of Bristol
> Tel:?(+44) 117 3317042?
> ------------------------------------------------------------------------
> *From:* Lowry, Roy K. <rkl at bodc.ac.uk>
> *Sent:* 12 March 2019 16:56:17
> *To:* Dan Say; cf-metadata at cgd.ucar.edu
> *Subject:* Re: Addition of HFC standard names
> ?
> Dear Dan,
>
> I think it would be better to have the IUPAC names somewhere
> (e.g.?1,1,1,2-tetrafluoroethane for hfc134a if Wikipedia is correct) in
> the Standard Name entry. I'd be happy with it in the definition but
> would not object to it being in the Standard Name itself.
>
> Cheers, Roy.
>
> I have now retired but will continue to be active through an Emeritus
> Fellowship using this e-mail address.
>
>
> ------------------------------------------------------------------------
> *From:* CF-metadata <cf-metadata-bounces at cgd.ucar.edu> on behalf of Dan
> Say <dan.say at bristol.ac.uk>
> *Sent:* 12 March 2019 16:43
> *To:* cf-metadata at cgd.ucar.edu
> *Subject:* [CF-metadata] Addition of HFC standard names
> ?
>
> Dear All,
>
> I'd like to request an addition to the standard name list for
> atmospheric measurements of hydrofluorocarbons HFC-134a, HFC-143a,
> HFC-125, HFC-152a, HFC-32 and HFC-23. Here are the details of the
> proposed standard names.
>
> Proposal for a new standard variable names:
>
> Names:?
> mole_fraction_of_hfc134a_in_air
> mole_fraction_of_hfc143a_in_air
> mole_fraction_of_hfc125_in_air
> mole_fraction_of_hfc152a_in_air
> mole_fraction_of_hfc32_in_air
> mole_fraction_of_hfc23_in_air
>
> Description: Atmospheric measurements of?hydrofluorocarbons (HFC) are
> reported as mole fraction data in units of parts per trillion (ppt,
> 1E-12). The long name will remain the same as the standard name.
>
> Thanks in advance,
>
> Dan
>
> */________________________________
> /*
> */
> /*
> *Dr?Daniel Say*
> Postdoctoral Research Associate
> Atmospheric Chemistry Research Group
> School of Chemistry
> University of Bristol
> Tel:?(+44) 117 3317042?
>
>
> This email and any attachments are intended solely for the use of the
> named recipients. If you are not the intended recipient you must not
> use, disclose, copy or distribute this email or any of its attachments
> and should notify the sender immediately and delete this email from your
> system.
> UK Research and Innovation has taken every reasonable precaution to
> minimise risk of this email or any attachments containing viruses or
> malware but the recipient should carry out its own virus and malware
> checks before opening the attachments. UK Research and Innovation does
> not accept any liability for any losses or damages which the recipient
> may sustain due to presence of any viruses.
> Opinions, conclusions or other information in this message and
> attachments that are not related directly to UK Research and Innovation
> business are solely those of the author and do not represent the views
> of UK Research and Innovation.
>
>
>
> This email and any attachments are intended solely for the use of the
> named recipients. If you are not the intended recipient you must not
> use, disclose, copy or distribute this email or any of its attachments
> and should notify the sender immediately and delete this email from your
> system.
> UK Research and Innovation has taken every reasonable precaution to
> minimise risk of this email or any attachments containing viruses or
> malware but the recipient should carry out its own virus and malware
> checks before opening the attachments. UK Research and Innovation does
> not accept any liability for any losses or damages which the recipient
> may sustain due to presence of any viruses.
> Opinions, conclusions or other information in this message and
> attachments that are not related directly to UK Research and Innovation
> business are solely those of the author and do not represent the views
> of UK Research and Innovation.
>
>
> _______________________________________________
> CF-metadata mailing list
> CF-metadata at cgd.ucar.edu
> http://mailman.cgd.ucar.edu/mailman/listinfo/cf-metadata
>
Received on Wed Mar 13 2019 - 03:33:18 GMT
