aerodynamic_particle_diameterThe diameter of a spherical particle with density 1000 kg m-3 having the same aerodynamic properties as the particles in question.
aerodynamic_resistanceThe "aerodynamic_resistance" is the resistance to mixing through the boundary layer toward the surface by means of the dominant process, turbulent transport. Reference: Wesely, M. L., 1989, doi:10.1016/0004-6981(89)90153-4.
age_of_sea_ice"Age of sea ice" means the length of time elapsed since the ice formed.
age_of_stratospheric_air"Age of stratospheric air" means an estimate of the time since a parcel of stratospheric air was last in contact with the troposphere.
age_of_surface_snow"Age of surface snow" means the length of time elapsed since the snow accumulated on the earth's surface. The surface called "surface" means the lower boundary of the atmosphere.
air_density
No help available.
air_potential_temperaturePotential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
air_pressure
No help available.
air_pressure_anomaly"anomaly" means difference from climatology.
air_pressure_at_cloud_basecloud_base refers to the base of the lowest cloud.
air_pressure_at_cloud_topcloud_top refers to the top of the highest cloud.
air_pressure_at_convective_cloud_basecloud_base refers to the base of the lowest cloud. Convective cloud is that produced by the convection schemes in an atmosphere model.
air_pressure_at_convective_cloud_topcloud_top refers to the top of the highest cloud. Convective cloud is that produced by the convection schemes in an atmosphere model.
air_pressure_at_freezing_level
No help available.
air_pressure_at_sea_levelsea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.
air_temperatureAir temperature is the bulk temperature of the air, not the surface (skin) temperature.
air_temperature_anomaly"anomaly" means difference from climatology. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
air_temperature_at_cloud_topcloud_top refers to the top of the highest cloud. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
air_temperature_lapse_rateAir temperature is the bulk temperature of the air, not the surface (skin) temperature. A lapse rate is the negative derivative of a quantity with respect to increasing height above the surface, or the (positive) derivative with respect to increasing depth.
air_temperature_thresholdAir temperature is the bulk temperature of the air, not the surface (skin) temperature. Air temperature excess and deficit are calculated relative to the air temperature threshold.
altimeter_rangeAn altimeter operates by sending out a short pulse of radiation and measuring the time required for the pulse to return from the sea surface; this measurement is used to calculate the distance between the instrument and the sea surface. That measurement is called the "altimeter range" and does not include any range corrections.
altimeter_range_correction_due_to_dry_troposphereThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. To apply the altimeter range correction it must be added to the quantity with standard name altimeter_range. "Correction_due_to_dry_troposphere" means a correction for dry gases in the troposphere, i.e. excluding the effect of liquid water. Additional altimeter range corrections are given by the quantities with standard names altimeter_range_correction_due_to_wet_troposphere, altimeter_range_correction_due_to_ionosphere, sea_surface_height_correction_due_to_air_pressure_at_low_frequency and sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequency.
altimeter_range_correction_due_to_ionosphereThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. To apply the altimeter range correction it must be added to the quantity with standard name altimeter_range. "Correction_due_to_ionosphere" means a correction for the atmosphere's electron content in the ionosphere. Additional altimeter range corrections are given by the quantities with standard names altimeter_range_correction_due_to_wet_troposphere, altimeter_range_correction_due_to_dry_troposphere, sea_surface_height_correction_due_to_air_pressure_at_low_frequency and sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequency.
altimeter_range_correction_due_to_wet_troposphereThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. To apply the altimeter range correction it must be added to the quantity with standard name altimeter_range. "Correction_due_to_wet_troposphere" means a correction for the effect of liquid water in the troposphere. Additional altimeter range corrections are given by the quantities with standard names altimeter_range_correction_due_to_dry_troposphere, altimeter_range_correction_due_to_ionosphere, sea_surface_height_correction_due_to_air_pressure_at_low_frequency and sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequency.
altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
altitude_at_top_of_dry_convectionAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
ambient_aerosol_particle_diameter"Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature".
amplitude_of_global_average_sea_level_changeGlobal average sea level change is due to change in volume of the water in the ocean, caused by mass and/or density change, or to change in the volume of the ocean basins, caused by tectonics etc. It is sometimes called "eustatic", which is a term that also has other definitions. It differs from the change in the global average sea surface height relative to the centre of the Earth by the global average vertical movement of the ocean floor. Zero sea level change is an arbitrary level. Amplitude is the magnitude of a wave modelled by a sinusoidal function. A coordinate variable of harmonic_period should be used to specify the period of the sinusoidal wave.
angle_of_emergenceThe angle of emergence is that between the direction of a beam of radiation emerging from the surface of a medium and the normal to that surface.
angle_of_incidenceThe angle of incidence is that between the direction of approach of a beam of radiation toward a surface and the normal to that surface.
angle_of_rotation_from_east_to_xThe quantity with standard name angle_of_rotation_from_east_to_x is the angle, anticlockwise reckoned positive, between due East and (dr/di)jk, where r(i,j,k) is the vector 3D position of the point with coordinate indices (i,j,k). It could be used for rotating vector fields between model space and latitude-longitude space.
angle_of_rotation_from_east_to_yThe quantity with standard name angle_of_rotation_from_east_to_y is the angle, anticlockwise reckoned positive, between due East and (dr/dj)ik, where r(i,j,k) is the vector 3D position of the point with coordinate indices (i,j,k). It could be used for rotating vector fields between model space and latitude-longitude space.
angle_of_rotation_from_solar_azimuth_to_platform_azimuthStandard names for "platform" describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. An angle of rotation is reckoned positive in the anticlockwise direction. The "angle_of_rotation_from_solar_azimuth_to_platform_azimuth" is the angle of rotation between the solar azimuth angle and the platform azimuth angle. Solar azimuth angle is the horizontal angle between the line of sight from the observation point to the sun and a reference direction at the observation point, which is often due north. The angle is measured clockwise, starting from the reference direction. Platform azimuth angle is the horizontal angle between the line of sight from the observation point to the platform and a reference direction at the observation point, which is often due north. The angle is measured clockwise, starting from the reference direction.
angstrom_exponent_of_ambient_aerosol_in_air
alias: aerosol_angstrom_exponent
The "Angstrom exponent" appears in the formula relating aerosol optical thickness to the wavelength of incident radiation: T(lambda) = T(lambda0) * [lambda/lambda0] ** (-1 * alpha) where alpha is the Angstrom exponent, lambda is the wavelength of incident radiation, lambda0 is a reference wavelength, T(lambda) and T(lambda0) are the values of aerosol optical thickness at wavelengths lambda and lambda0, respectively. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature".
area_fraction"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X.
area_fraction_below_surfaceThe surface called "surface" means the lower boundary of the atmosphere. The fraction of horizontal area where the surface specified by the axes other than horizontal axes, for instance an isobaric surface, is below the (ground or sea) surface.
area_type
alias: land_cover
alias: surface_cover
A variable with the standard name of area_type contains strings which indicate the nature of the surface e.g. land, sea, sea_ice. These strings are standardised. Values must be taken from the area_type table.
atmosphere_absolute_vorticityAbsolute vorticity is the sum of relative vorticity and the upward component of vorticity due to the Earth's rotation.
atmosphere_absorption_optical_thickness_due_to_ambient_aerosol_particles
alias: atmosphere_absorption_optical_thickness_due_to_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_absorption_optical_thickness_due_to_black_carbon_ambient_aerosolThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_absorption_optical_thickness_due_to_dust_ambient_aerosol_particles
alias: atmosphere_absorption_optical_thickness_due_to_dust_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_absorption_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol_particles
alias: atmosphere_absorption_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_absorption_optical_thickness_due_to_seasalt_ambient_aerosol_particles
alias: atmosphere_absorption_optical_thickness_due_to_seasalt_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_absorption_optical_thickness_due_to_sulfate_ambient_aerosol_particles
alias: atmosphere_absorption_optical_thickness_due_to_sulfate_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Absorption optical thickness" means that part of the atmosphere optical thickness that is caused by the absorption of incident radiation. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_boundary_layer_thicknessThe atmosphere boundary layer thickness is the "depth" or "height" of the (atmosphere) planetary boundary layer.
atmosphere_convective_available_potential_energy
alias: atmosphere_specific_convective_available_potential_energy
alias: specific_convective_available_potential_energy
Convective(ly) available potential energy (often abbreviated CAPE) is a stability measure calculated by integrating the positive temperature difference between the surrounding atmosphere and a parcel of air lifted adiabatically from a given starting height to its equilibrium level. A coordinate variable of original_air_pressure_of_lifted_parcel should be specified to indicate the starting height of the lifted parcel. CAPE exists under conditions of potential instability, and measures the potential energy per unit mass that would be released by the unstable parcel if it were able to convect upwards to equilibrium.
atmosphere_convective_available_potential_energy_wrt_surfaceConvective(ly) available potential energy (often abbreviated CAPE) is a stability measure calculated by integrating the positive temperature difference between the surrounding atmosphere and a parcel of air lifted adiabatically from the surface to its equilibrium level. CAPE exists under conditions of potential instability, and measures the potential energy per unit mass that would be released by the unstable parcel if it were able to convect upwards to equilibrium.
atmosphere_convective_inhibitionConvective inhibition is the amount of energy per unit mass required to overcome the negatively buoyant energy exerted by the environment on a parcel of air. Convective inhibition is often abbreviated as "CIN" or "CINH". It is calculated by integrating the negative temperature difference between the surrounding atmosphere and a parcel of air lifted adiabatically from a given starting height to its equilibrium level. A coordinate variable of original_air_pressure_of_lifted_parcel should be specified to indicate the starting height of the lifted parcel.
atmosphere_convective_inhibition_wrt_surfaceConvective inhibition is the amount of energy per unit mass required to overcome the negatively buoyant energy exerted by the environment on a parcel of air. Convective inhibition is often abbreviated as "CIN" or "CINH". It is calculated by integrating the negative temperature difference between the surrounding atmosphere and a parcel of air lifted adiabatically from the surface to its equilibrium level.
atmosphere_downdraft_convective_mass_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts and/or downdrafts only. "Downdraft" means that the flux is positive in the downward direction (negative upward).
atmosphere_dry_energy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
atmosphere_dry_static_energy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
atmosphere_eastward_stress_due_to_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Atmosphere_Xward_stress is a stress which tends to accelerate the atmosphere in direction X.
atmosphere_energy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Atmosphere energy content" has not yet been precisely defined! Please express your views on this quantity on the CF email list.
atmosphere_enthalpy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
atmosphere_heat_diffusivity
No help available.
atmosphere_horizontal_streamfunction"Horizontal" indicates that the streamfunction applies to a horizontal velocity field on a particular vertical level.
atmosphere_horizontal_velocity_potentialA velocity is a vector quantity. "Horizontal" indicates that the velocity potential applies to a horizontal velocity field on a particular vertical level.
atmosphere_hybrid_height_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates.
atmosphere_hybrid_sigma_pressure_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates.
atmosphere_kinetic_energy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_level_of_free_convectionThe level of free convection is the altitude where the temperature of the environment decreases faster than the moist adiabatic lapse rate of a saturated air parcel at the same level. It is calculated by lifting a parcel of air dry adiabatically to the LCL (lifted condensation level), then moist adiabatically until the parcel temperature is equal to the ambient temperature. A coordinate variable of original_air_pressure_of_lifted_parcel should be specified to indicate the starting height of the lifted parcel.
atmosphere_level_of_free_convection_wrt_surfaceThe level of free convection is the altitude where the temperature of the environment decreases faster than the moist adiabatic lapse rate of a saturated air parcel at the same level. It is calculated by lifting a parcel of air dry adiabatically from the surface to the LCL (lifting condensation level), then moist adiabatically until the parcel temperature is equal to the ambient temperature.
atmosphere_lifting_condensation_levelThe lifting condensation level is the height at which the relative humidity of an air parcel cooled by dry adiabatic lifting would reach 100%. A coordinate variable of original_air_pressure_of_lifted_parcel should be specified to indicate the starting height of the lifted parcel.
atmosphere_lifting_condensation_level_wrt_surfaceThe lifting condensation level is the height at which the relative humidity of an air parcel cooled by dry adiabatic lifting from the surface would reach 100%.
atmosphere_ln_pressure_coordinate"ln_X" means natural logarithm of X. X must be dimensionless. See Appendix D of the CF convention for information about dimensionless vertical coordinates.
atmosphere_mass_content_of_acetic_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
atmosphere_mass_content_of_aceto_nitrile"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
atmosphere_mass_content_of_alkanes"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Alkanes are saturated hydrocarbons, i.e. they do not contain any chemical double bonds. Alkanes contain only hydrogen and carbon combined in the general proportions C(n)H(2n+2); "alkanes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkane species, e.g., methane and ethane.
atmosphere_mass_content_of_alkenes"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Alkenes are unsaturated hydrocarbons as they contain chemical double bonds between adjacent carbon atoms. Alkenes contain only hydrogen and carbon combined in the general proportions C(n)H(2n); "alkenes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkene species, e.g., ethene and propene.
atmosphere_mass_content_of_alpha_hexachlorocyclohexane"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
atmosphere_mass_content_of_alpha_pinene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
atmosphere_mass_content_of_ammonia"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ammonia is NH3.
atmosphere_mass_content_of_ammonium_dry_aerosol_particles
alias: atmosphere_mass_content_of_ammonium_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for ammonium is NH4.
atmosphere_mass_content_of_anthropogenic_nmvoc_expressed_as_carbon"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_aromatic_compounds"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Aromatic compounds in organic chemistry are compounds that contain at least one benzene ring of six carbon atoms joined by alternating single and double covalent bonds. The simplest aromatic compound is benzene itself. In standard names "aromatic_compounds" is the term used to describe the group of aromatic chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aromatic species, e.g. benzene and xylene.
atmosphere_mass_content_of_atomic_bromine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical symbol for atomic bromine is Br.
atmosphere_mass_content_of_atomic_chlorine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical symbol for atomic chlorine is Cl.
atmosphere_mass_content_of_atomic_nitrogen"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical symbol for atomic nitrogen is N.
atmosphere_mass_content_of_benzene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
atmosphere_mass_content_of_beta_pinene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_bromine_chloride"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for bromine chloride is BrCl.
atmosphere_mass_content_of_bromine_monoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for bromine monoxide is BrO.
atmosphere_mass_content_of_bromine_nitrate"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for bromine nitrate is BrONO2. The chemical formula for the nitrate anion is NO3-.
atmosphere_mass_content_of_brox_expressed_as_bromine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with the exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_butane"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_mass_content_of_carbon_dioxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for carbon dioxide is CO2.
atmosphere_mass_content_of_carbon_monoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of carbon monoxide is CO.
atmosphere_mass_content_of_carbon_tetrachloride"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of carbon tetrachloride is CCl4.
atmosphere_mass_content_of_cfc11"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
atmosphere_mass_content_of_cfc113"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
atmosphere_mass_content_of_cfc113a"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
atmosphere_mass_content_of_cfc114"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
atmosphere_mass_content_of_cfc115"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
atmosphere_mass_content_of_cfc12"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
atmosphere_mass_content_of_chlorine_dioxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for chlorine dioxide is OClO.
atmosphere_mass_content_of_chlorine_monoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for chlorine monoxide is ClO.
atmosphere_mass_content_of_chlorine_nitrate"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for chlorine nitrate is ClONO2.
atmosphere_mass_content_of_cloud_condensed_water
alias: atmosphere_cloud_condensed_water_content
"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_cloud_ice
alias: atmosphere_cloud_ice_content
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_cloud_liquid_water
alias: atmosphere_cloud_liquid_water_content
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_clox_expressed_as_chlorine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Clox" describes a family of chemical species consisting of inorganic chlorine compounds with the exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_convective_cloud_condensed_water
alias: atmosphere_convective_cloud_condensed_water_content
"condensed_water" means liquid and ice. Convective cloud is that produced by the convection schemes in an atmosphere model. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_convective_cloud_liquid_water
alias: atmosphere_convective_cloud_liquid_water_content
Convective cloud is that produced by the convection schemes in an atmosphere model. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_dichlorine_peroxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for dichlorine peroxide is Cl2O2.
atmosphere_mass_content_of_dimethyl_sulfide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
atmosphere_mass_content_of_dinitrogen_pentoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for dinitrogen pentoxide is N2O5.
atmosphere_mass_content_of_dust_dry_aerosol_particles
alias: atmosphere_mass_content_of_dust_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles
alias: atmosphere_mass_content_of_black_carbon_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
atmosphere_mass_content_of_ethane"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_mass_content_of_ethanol"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ethanol is C2H5OH.
atmosphere_mass_content_of_ethene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
atmosphere_mass_content_of_ethyne"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
atmosphere_mass_content_of_formaldehyde"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
atmosphere_mass_content_of_formic_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
atmosphere_mass_content_of_gaseous_divalent_mercury"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
atmosphere_mass_content_of_gaseous_elemental_mercury"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical symbol for mercury is Hg.
atmosphere_mass_content_of_halon1202"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
atmosphere_mass_content_of_halon1211"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
atmosphere_mass_content_of_halon1301"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
atmosphere_mass_content_of_halon2402"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
atmosphere_mass_content_of_hcc140a"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
atmosphere_mass_content_of_hcfc141b"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
atmosphere_mass_content_of_hcfc142b"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
atmosphere_mass_content_of_hcfc22"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
atmosphere_mass_content_of_hexachlorobiphenyl"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings, each of which is additionally bonded to three chlorine atoms.
atmosphere_mass_content_of_hox_expressed_as_hydrogen"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_hydrogen_bromide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hydrogen bromide is HBr.
atmosphere_mass_content_of_hydrogen_chloride"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hydrogen chloride is HCl.
atmosphere_mass_content_of_hydrogen_cyanide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hydrogen cyanide is HCN.
atmosphere_mass_content_of_hydrogen_peroxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hydrogen peroxide is H2O2.
atmosphere_mass_content_of_hydroperoxyl_radical"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_mass_content_of_hydroxyl_radical"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_mass_content_of_hypobromous_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hypobromous acid is HOBr.
atmosphere_mass_content_of_hypochlorous_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for hypochlorous acid is HOCl.
atmosphere_mass_content_of_inorganic_bromine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
atmosphere_mass_content_of_inorganic_chlorine"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox" are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
atmosphere_mass_content_of_isoprene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
atmosphere_mass_content_of_limonene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
atmosphere_mass_content_of_mercury_dry_aerosol_particles
alias: atmosphere_mass_content_of_mercury_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
atmosphere_mass_content_of_methane"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_mass_content_of_methanol"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methanol is CH3OH.
atmosphere_mass_content_of_methyl_bromide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
atmosphere_mass_content_of_methyl_chloride"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
atmosphere_mass_content_of_methyl_hydroperoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methyl hydroperoxide is CH3OOH.
atmosphere_mass_content_of_methyl_peroxy_radical"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_mass_content_of_molecular_hydrogen"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for molecular hydrogen is H2.
atmosphere_mass_content_of_nitrate_dry_aerosol_particles
alias: atmosphere_mass_content_of_nitrate_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for the nitrate anion is NO3-.
atmosphere_mass_content_of_nitrate_radical"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrate is NO3. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_mass_content_of_nitric_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitric acid is HNO3.
atmosphere_mass_content_of_nitric_acid_trihydrate_ambient_aerosol_particles
alias: atmosphere_mass_content_of_nitric_acid_trihydrate_ambient_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid. The chemical formula for nitric acid is HNO3.
atmosphere_mass_content_of_nitrogen_monoxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrogen monoxide is NO.
atmosphere_mass_content_of_nitrous_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrous acid is HNO2.
atmosphere_mass_content_of_nitrous_oxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrous oxide is N2O.
atmosphere_mass_content_of_nmvoc_expressed_as_carbon"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_nox_expressed_as_nitrogen"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_noy_expressed_as_nitrogen"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_mass_content_of_oxygenated_hydrocarbons"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Oxygenated" means containing oxygen. "Hydrocarbon" means a compound containing hydrogen and carbon.
atmosphere_mass_content_of_ozone"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ozone is O3.
atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles
alias: atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
atmosphere_mass_content_of_peroxyacetyl_nitrate"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
atmosphere_mass_content_of_peroxynitric_acid"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
atmosphere_mass_content_of_peroxy_radicals"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The term "peroxy_radicals" means all organic and inorganic peroxy radicals. This includes HO2 and all organic peroxy radicals, sometimes referred to as RO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_particles
alias: atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
atmosphere_mass_content_of_propane"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_mass_content_of_propene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
atmosphere_mass_content_of_radon"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical symbol for radon is Rn.
atmosphere_mass_content_of_seasalt_dry_aerosol_particles
alias: atmosphere_mass_content_of_seasalt_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles
alias: atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter " means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
atmosphere_mass_content_of_sulfate
alias: atmosphere_so4_content
alias: atmosphere_sulfate_content
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_mass_content_of_sulfate_ambient_aerosol_particles
alias: atmosphere_mass_content_of_sulfate_ambient_aerosol
alias: atmosphere_content_of_sulfate_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature".
atmosphere_mass_content_of_sulfate_dry_aerosol_particles
alias: atmosphere_mass_content_of_sulfate_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for the sulfate anion is SO4(2-).
atmosphere_mass_content_of_sulfate_dry_aerosol_particles_expressed_as_sulfur
alias: atmosphere_mass_content_of_sulfate_dry_aerosol_expressed_as_sulfur
alias: atmosphere_mass_content_of_sulfate_expressed_as_sulfur_dry_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for the sulfate anion is SO4(2-).
atmosphere_mass_content_of_sulfur_dioxide"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for sulfur dioxide is SO2.
atmosphere_mass_content_of_terpenes"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Terpenes are hydrocarbons, that is, they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. The term "terpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual terpene species, e.g., isoprene and limonene.
atmosphere_mass_content_of_toluene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
atmosphere_mass_content_of_volcanic_ash"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Volcanic_ash" means the fine-grained products of explosive volcanic eruptions, such as minerals or crystals, older fragmented rock (e.g. andesite), and glass. Particles within a volcanic ash cloud have diameters less than 2 mm. "Volcanic_ash" does not include non-volcanic dust.
atmosphere_mass_content_of_water"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Water" means water in all phases.
atmosphere_mass_content_of_water_in_ambient_aerosol_particles
alias: atmosphere_mass_content_of_water_in_ambient_aerosol
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Water" means water in all phases. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature".
atmosphere_mass_content_of_water_vapor
alias: atmosphere_water_vapor_content
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
atmosphere_mass_content_of_xylene"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
atmosphere_mass_of_air_per_unit_area"Mass_of_air" means the mass due solely to the gaseous constituents of the atmosphere. The standard name for the mass including precipitation and aerosol particles is atmosphere_mass_per_unit_area.
atmosphere_mass_of_carbon_dioxideThe chemical formula for carbon dioxide is CO2.
atmosphere_mass_per_unit_area"X_area" means the horizontal area occupied by X within the grid cell.
atmosphere_mole_content_of_ozone"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The construction "atmosphere_mole_content_of_X" means the vertically integrated number of moles of X above a unit area. The chemical formula for ozone is O3. atmosphere_mole_content_of_ozone is usually measured in Dobson Units which are equivalent to 446.2 micromoles m-2. N.B. Data variables containing column content of ozone can be given the standard name of either equivalent_thickness_at_stp_of_atmosphere_ozone_content or atmosphere_mole_content_of_ozone.The latter name is recommended for consistency with mole content names for chemical species other than ozone.
atmosphere_moles_of_acetic_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
atmosphere_moles_of_aceto_nitrileThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
atmosphere_moles_of_alpha_hexachlorocyclohexaneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
atmosphere_moles_of_alpha_pineneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
atmosphere_moles_of_ammoniaThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ammonia is NH3.
atmosphere_moles_of_anthropogenic_nmvoc_expressed_as_carbonThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_atomic_bromineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic bromine is Br.
atmosphere_moles_of_atomic_chlorineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic chlorine is Cl.
atmosphere_moles_of_atomic_nitrogenThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic nitrogen is N.
atmosphere_moles_of_benzeneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
atmosphere_moles_of_beta_pineneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
atmosphere_moles_of_biogenic_nmvoc_expressed_as_carbonThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_bromine_chlorideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine chloride is BrCl.
atmosphere_moles_of_bromine_monoxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine monoxide is BrO.
atmosphere_moles_of_bromine_nitrateThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine nitrate is BrONO2.
atmosphere_moles_of_brox_expressed_as_bromineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with the exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_butaneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_moles_of_carbon_dioxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for carbon dioxide is CO2.
atmosphere_moles_of_carbon_monoxide
alias: moles_of_carbon_monoxide_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for carbon monoxide is CO.
atmosphere_moles_of_carbon_tetrachloride
alias: moles_of_carbon_tetrachloride_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for carbon tetrachloride is CCl4.
atmosphere_moles_of_cfc11
alias: moles_of_cfc11_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
atmosphere_moles_of_cfc113
alias: moles_of_cfc113_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
atmosphere_moles_of_cfc113aThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
atmosphere_moles_of_cfc114
alias: moles_of_cfc114_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
atmosphere_moles_of_cfc115
alias: moles_of_cfc115_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
atmosphere_moles_of_cfc12
alias: moles_of_cfc12_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
atmosphere_moles_of_chlorine_dioxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine dioxide is OClO.
atmosphere_moles_of_chlorine_monoxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine monoxide is ClO.
atmosphere_moles_of_chlorine_nitrateThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine nitrate is ClONO2.
atmosphere_moles_of_clox_expressed_as_chlorineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Clox" describes a family of chemical species consisting of inorganic chlorine compounds with the exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_dichlorine_peroxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dichlorine peroxide is Cl2O2.
atmosphere_moles_of_dimethyl_sulfideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
atmosphere_moles_of_dinitrogen_pentoxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dinitrogen pentoxide is N2O5.
atmosphere_moles_of_ethaneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_moles_of_ethanolThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethanol is C2H5OH.
atmosphere_moles_of_etheneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
atmosphere_moles_of_ethyneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
atmosphere_moles_of_formaldehydeThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
atmosphere_moles_of_formic_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
atmosphere_moles_of_gaseous_divalent_mercuryThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
atmosphere_moles_of_gaseous_elemental_mercuryThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for mercury is Hg.
atmosphere_moles_of_halon1202
alias: moles_of_halon1202_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
atmosphere_moles_of_halon1211
alias: moles_of_halon1211_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
atmosphere_moles_of_halon1301
alias: moles_of_halon1301_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
atmosphere_moles_of_halon2402
alias: moles_of_halon2402_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
atmosphere_moles_of_hcc140a
alias: moles_of_hcc140a_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
atmosphere_moles_of_hcfc141bThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
atmosphere_moles_of_hcfc142bThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
atmosphere_moles_of_hcfc22
alias: moles_of_hcfc22_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
atmosphere_moles_of_hexachlorobiphenylThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings, each of which is additionally bonded to three chlorine atoms.
atmosphere_moles_of_hox_expressed_as_hydrogenThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_hydrogen_bromideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen bromide is HBr.
atmosphere_moles_of_hydrogen_chlorideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen chloride is HCl.
atmosphere_moles_of_hydrogen_cyanideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen cyanide is HCN.
atmosphere_moles_of_hydrogen_peroxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen peroxide is H2O2.
atmosphere_moles_of_hydroperoxyl_radicalThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_moles_of_hydroxyl_radicalThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_moles_of_hypobromous_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hypobromous acid is HOBr.
atmosphere_moles_of_hypochlorous_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hypochlorous acid is HOCl.
atmosphere_moles_of_inorganic_bromineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
atmosphere_moles_of_inorganic_chlorineThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox" are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
atmosphere_moles_of_isopreneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
atmosphere_moles_of_limoneneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
atmosphere_moles_of_methane
alias: moles_of_methane_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_moles_of_methanolThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methanol is CH3OH.
atmosphere_moles_of_methyl_bromide
alias: moles_of_methyl_bromide_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
atmosphere_moles_of_methyl_chloride
alias: moles_of_methyl_chloride_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
atmosphere_moles_of_methyl_hydroperoxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl hydroperoxide is CH3OOH.
atmosphere_moles_of_methyl_peroxy_radicalThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_moles_of_molecular_hydrogen
alias: moles_of_molecular_hydrogen_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for molecular hydrogen is H2.
atmosphere_moles_of_nitrate_radicalThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
atmosphere_moles_of_nitric_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitric acid is HNO3.
atmosphere_moles_of_nitric_acid_trihydrate_ambient_aerosol_particles
alias: atmosphere_moles_of_nitric_acid_trihydrate_ambient_aerosol
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
atmosphere_moles_of_nitrogen_dioxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrogen dioxide is NO2.
atmosphere_moles_of_nitrogen_monoxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrogen monoxide is NO.
atmosphere_moles_of_nitrous_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrous acid is HNO2.
atmosphere_moles_of_nitrous_oxide
alias: moles_of_nitrous_oxide_in_atmosphere
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrous oxide is N2O.
atmosphere_moles_of_nmvoc_expressed_as_carbonThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_nox_expressed_as_nitrogenThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_noy_expressed_as_nitrogenThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
atmosphere_moles_of_ozoneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ozone is O3.
atmosphere_moles_of_peroxyacetyl_nitrateThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
atmosphere_moles_of_peroxynitric_acidThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
atmosphere_moles_of_propaneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
atmosphere_moles_of_propeneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
atmosphere_moles_of_radonThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for radon is Rn.
atmosphere_moles_of_sulfur_dioxideThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for sulfur dioxide is SO2.
atmosphere_moles_of_tolueneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
atmosphere_moles_of_water_vaporThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe.
atmosphere_moles_of_xyleneThe construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
atmosphere_momentum_diffusivity
No help available.
atmosphere_net_rate_of_absorption_of_longwave_energy"longwave" means longwave radiation. Net absorbed radiation is the difference between absorbed and emitted radiation.
atmosphere_net_rate_of_absorption_of_shortwave_energy"shortwave" means shortwave radiation. Net absorbed radiation is the difference between absorbed and emitted radiation.
atmosphere_net_upward_convective_mass_flux
alias: atmosphere_convective_mass_flux
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. Net upward convective mass flux is the difference between the updraft mass flux and the downdraft mass flux. "Upward" indicates a vector component which is positive when directed upward (negative downward). For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts and/or downdrafts only.
atmosphere_net_upward_deep_convective_mass_flux"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts and/or downdrafts only. Net upward convective mass flux is the difference between the updraft mass flux and the downdraft mass flux.
atmosphere_net_upward_shallow_convective_mass_flux"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts and/or downdrafts only. Net upward convective mass flux is the difference between the updraft mass flux and the downdraft mass flux.
atmosphere_northward_stress_due_to_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Atmosphere_Xward_stress is a stress which tends to accelerate the atmosphere in direction X.
atmosphere_number_content_of_aerosol_particles"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself.
atmosphere_number_content_of_cloud_droplets"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_number_content_of_ice_crystals"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
atmosphere_optical_thickness_due_to_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_ambient_aerosol
alias: atmosphere_optical_thickness_due_to_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_ammonium_ambient_aerosol_particlesThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-"optical_thickness") on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_black_carbon_ambient_aerosolThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). "Ambient aerosol" is aerosol that has taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the aerosol. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing.
atmosphere_optical_thickness_due_to_cloudThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_convective_cloudThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. Convective cloud is that produced by the convection schemes in an atmosphere model. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_dust_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_dust_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_dust_dry_aerosol_particles
alias: atmosphere_optical_thickness_due_to_dust_dry_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-"optical_thickness") on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_nitrate_ambient_aerosol_particlesThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-"optical_thickness") on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The chemical formula for the nitrate anion is NO3-.
atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_particulate_organic_matter_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_pm10_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_pm10_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_pm1_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_pm1_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_pm2p5_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_pm2p5_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_seasalt_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_seasalt_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_stratiform_cloudThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_sulfate_ambient_aerosol_particlesThe optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-"optical_thickness") on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_optical_thickness_due_to_water_in_ambient_aerosol_particles
alias: atmosphere_optical_thickness_due_to_water_in_ambient_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. The atmosphere optical thickness applies to radiation passing through the entire atmosphere. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "atmosphere_optical_thickness_due_to_water_in_ambient_aerosol" refers to the optical thickness due to the water that is associated with aerosol particles due to hygroscopic growth in ambient air, affecting the radius and refractive index of the particle. It corresponds to the difference between the total dry aerosol optical thickness and the total ambient aerosol optical thickness. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
atmosphere_potential_energy_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
atmosphere_relative_vorticityRelative vorticity is the upward component of the vorticity vector i.e. the component which arises from horizontal velocity.
atmosphere_sigma_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates.
atmosphere_sleve_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates.
atmosphere_stability_k_indexThe atmosphere_stability_k_index is an index that indicates the potential of severe convection and is often referred to a simply the k index. The index is derived from the difference in air temperature between 850 and 500 hPa, the dew point temperature at 850 hPa, and the difference between the air temperature and the dew point temperature at
700 hPa.
atmosphere_stability_showalter_indexThe atmosphere_stability_showalter_index is an index used to determine convective and thunderstorm potential and is often referred to as simply the showalter index. The index is defined as the temperature difference between a parcel of air lifted from 850 to 500 hPa (wet adiabatically) and the ambient air temperature at 500 hPa.
atmosphere_stability_total_totals_indexThe atmosphere_stability_total_totals_index indicates the
likelihood of severe convection and is often referred to as simply the
total totals index. The index is derived from the difference in air
temperature between 850 and 500 hPa (the vertical totals) and the
difference between the dew point temperature at 850 hPa and the air
temperature at 500 hPa (the cross totals). The vertical totals and cross
totals are summed to obtain the index.
atmosphere_updraft_convective_mass_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The atmosphere convective mass flux is the vertical transport of mass for a field of cumulus clouds or thermals, given by the product of air density and vertical velocity. For an area-average, cell_methods should specify whether the average is over all the area or the area of updrafts and/or downdrafts only. "Updraft" means that the flux is positive in the updward direction (negative downward).
backscattering_ratioScattering of radiation is its deflection from its incident path without loss of energy. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity. "Backscattering ratio" is the ratio of the quantity with standard name volume_attenuated_backwards_scattering_function_in_air to the quantity with standard name volume_attenuated_backwards_scattering_function_in_air_assuming_no_aerosol_or_cloud.
baroclinic_eastward_sea_water_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
baroclinic_northward_sea_water_velocityA velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).
barometric_altitudeBarometric altitude is the altitude determined by a pressure measurement which is converted to altitude through interpolation of the International Standard Atmosphere (ICAO, 1976). A mean sea level pressure of 1013.25 hPa is used for the surface pressure.
barotropic_eastward_sea_water_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
barotropic_northward_sea_water_velocityA velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).
barotropic_sea_water_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x.
barotropic_sea_water_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y.
baseflow_amount"Baseflow" is subsurface runoff which takes place below the level of the water table. Runoff is the liquid water which drains from land. "Amount" means mass per unit area.
beaufort_wind_force"Beaufort wind force" is an index assigned on the Beaufort wind force scale and relates a qualitative description of the degree of disturbance or destruction caused by wind to the speed of the wind. The Beaufort wind scale varies between 0 (qualitatively described as calm, smoke rises vertically, sea appears glassy) (wind speeds in the range 0 - 0.2 m s-1) and 12 (hurricane, wave heights in excess of 14 m) (wind speeds in excess of 32.7 m s-1).
bedrock_altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. "Bedrock" is the solid Earth surface beneath land ice or ocean water.
bedrock_altitude_change_due_to_isostatic_adjustmentThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. "Bedrock" is the solid Earth surface beneath land ice or ocean water. The zero of bedrock altitude change is arbitrary. Isostatic adjustment is the vertical movement of the lithosphere due to changing surface ice and water loads.
bioluminescent_photon_rate_in_sea_water
No help available.
biomass_burning_carbon_flux"Biomass burning carbon" refers to the rate at which biomass is burned by forest fires etc., expressed as the mass of carbon which it contains. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
bolus_eastward_sea_water_velocityBolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
bolus_northward_sea_water_velocityBolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Northward" indicates a vector component which is positive when directed northward (negative southward).
bolus_sea_water_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. Bolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. bolus_sea_water_x_velocity is used in some parameterisations of lateral diffusion in the ocean.
bolus_sea_water_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. Bolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. bolus_sea_water_y_velocity is used in some parameterisations of lateral diffusion in the ocean.
bolus_upward_sea_water_velocityBolus velocity in an ocean model means the velocity due to a scheme representing eddy-induced effects which are not resolved on the grid scale of the model. "Upward" indicates a vector component which is positive when directed upward (negative downward).
brightness_temperatureThe brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area.
brightness_temperature_anomalyThe brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area. "anomaly" means difference from climatology.
brunt_vaisala_frequency_in_airFrequency is the number of oscillations of a wave per unit time.
burned_area"X_area" means the horizontal area occupied by X within the grid cell. "Burned area" means the area of burned vegetation.
burned_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Burned area" means the area of burned vegetation.
canopy_and_surface_water_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. "Canopy and surface water" means the sum of water on the ground and on the canopy.
canopy_heightHeight is the vertical distance above the surface. "Canopy" means the plant or vegetation canopy.
canopy_resistance_to_ozone_dry_deposition"Canopy" means the plant or vegetation canopy. The "canopy_resistance" is the resistance of a compound to uptake by the vegetation canopy. It varies both with the surface and the chemical species or physical state (gas or particle). Canopy resistance is a function of the canopy stomatal resistance (Rstom), the canopy cuticle resistance (Rcuticle), and the soil resistance (Rsoil). In the case of ozone the uptake by the cuticle is small compared to the uptake through the stomata, reference: Kerstiens and Lendzian, 1989. This means that the cuticle transfer pathway can be neglected in model parameterizations, reference: Ganzeveld and Jos Lelieveld , 1995, doi/10.1029/95JD02266/pdf. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen.
canopy_temperature"Canopy" means the plant or vegetation canopy. "Canopy_temperature" is the bulk temperature of the canopy, not the surface (skin) temperature.
canopy_throughfall_flux"Canopy" means the plant or vegetation canopy. "Throughfall" is the part of the precipitation flux that reaches the ground directly through the vegetative canopy, through intershrub spaces in the canopy, and as drip from the leaves, twigs, and stems (but not including snowmelt). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
canopy_water_amount"Amount" means mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. The canopy water is the water on the canopy.
carbon_content_of_products_of_anthropogenic_land_use_change"Content" indicates a quantity per unit area. "products_of_anthropogenic_land_use_change" means the different end-products of wood that has been removed from the environment by deforestation. Examples are paper, cardboard, furniture and timber for construction. Models that simulate land use changes have one or more pools of carbon that represent these products in order to conserve carbon and allow its eventual release into the atmosphere, for example, when the products decompose in landfill sites. "Anthropogenic" means influenced, caused, or created by human activity.
carbon_mass_flux_into_soil_from_litterIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. "Litter" is dead plant material in or above the soil.
carbon_mass_flux_into_soil_from_vegetation_excluding_litter"Vegetation" means any plants e.g. trees, shrubs, grass. "Litter" is dead plant material in or above the soil. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
cell_area"Cell_area" is the horizontal area of a gridcell.
cell_thickness"Thickness" means the vertical extent of a layer. "Cell" refers to a model grid-cell.
change_in_atmosphere_energy_content_due_to_change_in_sigma_coordinate_wrt_surface_pressureThe surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "wrt" means with respect to. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Atmosphere energy content" has not yet been precisely defined! Please express your views on this quantity on the CF email list. See Appendix D of the CF convention for information about dimensionless vertical coordinates.
change_in_energy_content_of_atmosphere_layer_due_to_change_in_sigma_coordinate_wrt_surface_pressureThe surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "wrt" means with respect to. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. See Appendix D of the CF convention for information about dimensionless vertical coordinates.
change_over_time_in_atmosphere_mass_content_of_water_due_to_advection
alias: change_over_time_in_atmosphere_water_content_due_to_advection
alias: change_over_time_in_atmospheric_water_content_due_to_advection
"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Water" means water in all phases. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
change_over_time_in_sea_water_absolute_salinity"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. Absolute Salinity, S_A, is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the Intergovernmental Oceanographic Commission (IOC). It is the mass fraction of dissolved material in sea water. Absolute Salinity incorporates the spatial variations in the composition of sea water. This type of Absolute Salinity is also called "Density Salinity". TEOS-10 estimates Absolute Salinity as the salinity variable that, when used with the TEOS-10 expression for density, yields the correct density of a sea water sample even when the sample is not of Reference Composition. In practice, Absolute Salinity is often calculated from Practical Salinity using a spatial lookup table of pre-defined values of the Absolute Salinity Anomaly. It is recommended that the version of (TEOS-10) software and the associated Absolute Salinity Anomaly climatology be specified within metadata by attaching a comment attribute to the data variable. Reference: www.teos-10.org; Millero et al., 2008 doi: 10.1016/j.dsr.2007.10.001. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 onwards), sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
change_over_time_in_sea_water_conservative_temperature"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. Conservative Temperature is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the International Oceanographic Commission (IOC). Conservative Temperature is specific potential enthalpy (which has the standard name sea_water_specific_potential_enthalpy) divided by a fixed value of the specific heat capacity of sea water, namely cp_0 = 3991.86795711963 J kg-1 K-1. Conservative Temperature is a more accurate measure of the "heat content" of sea water, by a factor of one hundred, than is potential temperature. Because of this, it can be regarded as being proportional to the heat content of sea water per unit mass. Reference: www.teos-10.org; McDougall, 2003 doi: 10.1175/1520-0485(2003)033<0945:PEACOV>2.0.CO;2.
change_over_time_in_sea_water_densitySea water density is the in-situ density (not the potential density). If 1000 kg m-3 is subtracted, the standard name "sea_water_sigma_t" should be chosen instead. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.
change_over_time_in_sea_water_neutral_density"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. "Neutral density" is a variable designed so that a surface of constant neutral density everywhere has a local slope that is close to the local slope of the neutral tangent plane. At the sea surface in the equatorial Pacific neutral density is very close to the potential density anomaly. At other locations, this is not the case. For example, along a neutral density surface there is a difference of up to 0.14 kg/m^3 in the potential density anomaly at the outcrops in the Southern and Northern hemispheres. Refer to Jackett & McDougall (1997; Journal of Physical Oceanography, Vol 27, doi: 10.1175/1520-0485(1997)027<0237:ANDVFT>2.0.CO;2) for more information.
change_over_time_in_sea_water_potential_densityPotential density is the density a parcel of air or sea water would have if moved adiabatically to a reference pressure, by default assumed to be sea level pressure. For sea water potential density, if 1000 kg m-3 is subtracted, the standard name "sea_water_sigma_theta" should be chosen instead. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.
change_over_time_in_sea_water_potential_temperaturePotential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.
change_over_time_in_sea_water_practical_salinity"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. Practical Salinity, S_P, is defined on the Practical Salinity Scale of 1978 (PSS-78) and is calculated from the electrical conductivity of sea water (as well as temperature and pressure). Officially S_P is dimensionless so that, while convenient, and while it is common practice, it is not officially sanctioned to say S_P = 35 psu. Often authors use PSS-78, as in S_P = 35 PSS-78. If salinity was measured using remote sensing techniques and not conductivity, then it is recommended that additional metadata (calibration/validation information) be described in the variable comment attribute. This name should be used to describe salinity observations made from 1978 onwards (Practical Salinity is the salinity quantity stored by national data centres for post-1978 observations). The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity. Reference: www.teos-10.org; Lewis, 1980 doi: 10.1109/JOE.1980.1145448
change_over_time_in_sea_water_preformed_salinity"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. Preformed Salinity, S*, is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the Intergovernmental Oceanographic Commission (IOC). Preformed Salinity is a salinity variable that is designed to be as conservative as possible, by removing the estimated biogeochemical influences on the sea water composition. Preformed Salinity is Absolute Salinity, S_A (which has the standard name sea_water_absolute_salinity), minus all contributions to sea water composition from biogeochemical processes. Preformed Salinity is the mass fraction of dissolved material in sea water. Reference: www.teos-10.org; Pawlowicz et al., 2011 doi: 10.5194/os-7-363-2011; Wright et al., 2011 doi: 10.5194/os-7-1-2011. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 onwards), and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
change_over_time_in_sea_water_salinity"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and the units attribute should normally be given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
change_over_time_in_sea_water_specific_potential_enthalpy"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. The potential enthalpy of a sea water parcel is the specific enthalpy after an adiabatic and isohaline change in pressure from its in situ pressure to the sea pressure p = 0 dbar. "specific" means per unit mass. Reference: www.teos-10.org; McDougall, 2003 doi: 10.1175/1520-0485(2003)033<0945:PEACOV>2.0.CO;2.
change_over_time_in_sea_water_temperature"change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate.Sea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
change_over_time_in_surface_snow_amountThe surface called "surface" means the lower boundary of the atmosphere. "change_over_time_in_X" means change in a quantity X over a time-interval, which should be defined by the bounds of the time coordinate. "Amount" means mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.
cloud_albedoThe albedo of cloud.
cloud_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer.
cloud_area_fraction_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover".
cloud_base_altitudecloud_base refers to the base of the lowest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
cloud_ice_mixing_ratioCloud ice mixing ratio of a parcel of air is the ratio of the mass of ice to the mass of dry air.
cloud_liquid_water_mixing_ratioCloud liquid water mixing ratio of a parcel of air is the ratio of the mass of liquid water to the mass of dry air.
cloud_top_altitudecloud_top refers to the top of the highest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
compressive_strength_of_sea_ice"Compressive strength" is a measure of the capacity of a material to withstand compressive forces. If compressive forces are exerted on a material in excess of its compressive strength, fracturing will occur.
convection_time_fraction"Time fraction" means a fraction of a time interval. The interval in question must be specified by the values or bounds of the time coordinate variable associated with the data. "X_time_fraction" means the fraction of the time interval during which X occurs.
convective_cloud_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_cloud_area_fraction_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_cloud_base_altitudecloud_base refers to the base of the lowest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_cloud_base_heightcloud_base refers to the base of the lowest cloud. Height is the vertical distance above the surface. Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_cloud_longwave_emissivityEmissivity is the ratio of the power emitted by an object to the power that would be emitted by a perfect black body having the same temperature as the object. The emissivity is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength or radiation_frequency is included to specify either the wavelength or frequency. Convective cloud is that produced by the convection schemes in an atmosphere model. "longwave" means longwave radiation.
convective_cloud_top_altitudecloud_top refers to the top of the highest cloud. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_cloud_top_heightcloud_top refers to the top of the highest cloud. Height is the vertical distance above the surface. Convective cloud is that produced by the convection schemes in an atmosphere model.
convective_precipitation_amount"Amount" means mass per unit area.
convective_precipitation_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
convective_precipitation_rate"Precipitation rate" means the depth or thickness of the layer formed by precipitation per unit time.
convective_rainfall_amount"Amount" means mass per unit area.
convective_rainfall_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
convective_rainfall_rate
No help available.
convective_snowfall_amount"Amount" means mass per unit area.
convective_snowfall_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
coriolis_parameterThe Coriolis parameter is twice the component of the earth's angular velocity about the local vertical i.e. 2 W sin L, where L is latitude and W the angular speed of the earth.
correction_for_model_negative_specific_humidityA numerical correction which is added to modelled negative specific humidities in order to obtain a value of zero.
depthDepth is the vertical distance below the surface.
depth_at_maximum_upward_derivative_of_sea_water_potential_temperatureThis quantity, often used to indicate the "thermocline depth", is the depth of the maximum vertical gradient of sea water potential temperature. Depth is the vertical distance below the surface. Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
depth_at_shallowest_local_minimum_in_vertical_profile_of_mole_concentration_of_dissolved_molecular_oxygen_in_sea_waterDepth is the vertical distance below the surface. 'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The concentration of any chemical species, whether particulate or dissolved, may vary with depth in the ocean. A depth profile may go through one or more local minima in concentration. The depth_at_shallowest_local_minimum_in_vertical_profile_of_mole_concentration_of_dissolved_molecular_oxygen_in_sea_water is the depth of the local minimum in the oxygen concentration that occurs closest to the sea surface.
depth_below_geoidThe geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation. "Depth_below_X" means the vertical distance below the named surface X.
depth_of_isosurface_of_sea_water_potential_temperatureThis quantity, sometimes called the "isotherm depth", is the depth (if it exists) at which the sea water potential temperature equals some specified value. This value should be specified in a scalar coordinate variable. Depth is the vertical distance below the surface. Potential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
dew_point_depressionDew point depression is also called dew point deficit. It is the amount by which the air temperature exceeds its dew point temperature. Dew point temperature is the temperature at which a parcel of air reaches saturation upon being cooled at constant pressure and specific humidity.
dew_point_temperatureDew point temperature is the temperature at which a parcel of air reaches saturation upon being cooled at constant pressure and specific humidity.
difference_of_air_pressure_from_model_referenceIn some atmosphere models, the difference of air pressure from model reference is a prognostic variable, instead of the air pressure itself. The model reference air pressure is a model-dependent constant.
diffuse_downwelling_shortwave_flux_in_airDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. "shortwave" means shortwave radiation. "Diffuse" radiation is radiation that has been scattered by particles in the atmosphere such as cloud droplets and aerosols.
diffuse_downwelling_shortwave_flux_in_air_assuming_clear_skyDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Diffuse" radiation is radiation that has been scattered by particles in the atmosphere such as cloud droplets and aerosols.
dimensionless_exner_functionThe term "Exner function" is applied to various quantities in the literature. "Dimensionless Exner function" is the standard name of (p/p0)^(R/Cp), where p is pressure, p0 a reference pressure, R the gas constant and Cp the specific heat at constant pressure. This quantity is also the ratio of in-situ to potential temperature. Standard names for other variants can be defined on request.
direction_of_radial_vector_away_from_instrumentThe direction_of_radial_vector_away_from_instrument is the direction in which the instrument itself is pointing. The direction is measured positive clockwise from due north. The "instrument" (examples are radar and lidar) is the device used to make an observation. "direction_of_X" means direction of a vector, a bearing.
direction_of_sea_ice_displacement"direction_of_X" means direction of a vector, a bearing. "Displacement" means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component. In that case, "displacement" is also the distance across the earth's surface calculated from the change in a moving object's geospatial position between the start and end of the time interval associated with the displacement variable. The "direction of displacement" is the angle between due north and the displacement vector.
direction_of_sea_ice_velocity"direction_of_X" means direction of a vector, a bearing. A velocity is a vector quantity. Sea ice velocity is defined as a two-dimensional vector, with no vertical component.
direction_of_sea_water_velocity"direction_of_X" means direction of a vector, a bearing. A velocity is a vector quantity.
divergence_of_sea_ice_velocity"[horizontal_]divergence_of_X" means [horizontal] divergence of a vector X; if X does not have a vertical component then "horizontal" should be omitted. A velocity is a vector quantity. Sea ice velocity is defined as a two-dimensional vector, with no vertical component.
divergence_of_wind"[horizontal_]divergence_of_X" means [horizontal] divergence of a vector X; if X does not have a vertical component then "horizontal" should be omitted. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
downward_dry_static_energy_flux_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Downward" indicates a vector component which is positive when directed downward (negative upward). Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_eastward_momentum_flux_in_air"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_eastward_momentum_flux_in_air_due_to_diffusion"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means thatthe quantity named is a single term in a sum of terms which together compose the generalquantity named by omitting the phrase.
downward_eastward_stress_at_sea_ice_base"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward.
downward_heat_flux_at_ground_level_in_snowground_level means the land surface (beneath the snow and surface water, if any). "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_heat_flux_at_ground_level_in_soilground_level means the land surface (beneath the snow and surface water, if any). "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_heat_flux_in_air"Downward" indicates a vector component which is positive when directed downward (negative upward). The vertical heat flux in air is the sum of all heat fluxes i.e. radiative, latent and sensible. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_heat_flux_in_floating_ice"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. "Floating ice" means any ice that is floating on water, e.g. on a sea or lake surface.
downward_heat_flux_in_sea_ice"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_heat_flux_in_soil"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_northward_momentum_flux_in_air"Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_northward_momentum_flux_in_air_due_to_diffusion"Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
downward_northward_stress_at_sea_ice_base"Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward.
downward_sea_ice_basal_salt_flux"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_water_vapor_flux_in_air_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downward_x_stress_at_sea_ice_base"x" indicates a vector component along the grid x-axis, positive with increasing x. "Downward" indicates a vector component which is positive when directed downward (negative upward).
downward_y_stress_at_sea_ice_base"y" indicates a vector component along the grid y-axis, positive with increasing y. "Downward" indicates a vector component which is positive when directed downward (negative upward).
downwelling_longwave_flux_in_air"longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_longwave_flux_in_air_assuming_clear_skyDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation.
downwelling_longwave_radiance_in_air"longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
downwelling_photon_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_photon_flux_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_photon_flux_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
downwelling_photon_radiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles.
downwelling_photon_radiance_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_photon_radiance_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
downwelling_photon_spherical_irradiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.
downwelling_photon_spherical_irradiance_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_photon_spherical_irradiance_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength. Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.
downwelling_photosynthetic_photon_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_photosynthetic_photon_radiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles.
downwelling_photosynthetic_photon_spherical_irradiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.
downwelling_photosynthetic_radiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength.
downwelling_photosynthetic_radiative_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_photosynthetic_spherical_irradiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".
downwelling_radiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
downwelling_radiance_per_unit_wavelength_in_air
alias: downwelling_spectral_radiance_in_air
Downwelling radiation is radiation from above. It does not mean "net downward". A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength. Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
downwelling_radiance_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_radiance_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength. Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
downwelling_radiative_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_radiative_flux_per_unit_wavelength_in_air
alias: downwelling_spectral_radiative_flux_in_air
Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
downwelling_radiative_flux_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_radiative_flux_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
downwelling_shortwave_flux_in_air"shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
downwelling_shortwave_flux_in_air_assuming_clear_skyDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation.
downwelling_shortwave_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. "shortwave" means shortwave radiation.
downwelling_shortwave_radiance_in_air"shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
downwelling_spherical_irradiance_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".
downwelling_spherical_irradiance_per_unit_wavelength_in_sea_water
alias: downwelling_spectral_spherical_irradiance_in_sea_water
Downwelling radiation is radiation from above. It does not mean "net downward". Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance". A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
dry_energy_content_of_atmosphere_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
dry_static_energy_content_of_atmosphere_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
duration_of_sunshineThe WMO definition of sunshine is that the surface incident radiative flux from the solar beam (i.e. excluding diffuse skylight) exceeds 120 W m-2. "Duration" is the length of time for which a condition holds.
dynamic_tropopause_potential_temperatureThe dynamical tropopause used in interpreting the dynamics of the upper troposphere and lower stratosphere. There are various definitions of dynamical tropopause in the scientific literature.
eastward_atmosphere_dry_static_energy_transport_across_unit_distance"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
eastward_atmosphere_water_transport_across_unit_distance"Water" means water in all phases. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
eastward_atmosphere_water_vapor_transport_across_unit_distance"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
eastward_derivative_of_northward_sea_ice_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Northward" indicates a vector component which is positive when directed northward (negative southward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component. "component_derivative_of_X" means derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, in the case where they are not true longitude and latitude. The named quantity is a component of the strain rate tensor for sea ice.
eastward_mass_flux_of_air"Eastward" indicates a vector component which is positive when directed eastward (negative westward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
eastward_momentum_flux_correction"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
eastward_sea_ice_displacement"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Displacement" means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component. An eastward displacement is the distance calculated from the change in a moving object's longitude between the start and end of the time interval associated with the displacement variable.
eastward_sea_ice_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component.
eastward_sea_water_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
eastward_sea_water_velocity_assuming_no_tideA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition.
eastward_transformed_eulerian_mean_air_velocity
alias: eastward_transformed_eulerian_mean_velocity
"Eastward" indicates a vector component which is positive when directed eastward (negative westward).
eastward_water_vapor_flux_in_air
alias: eastward_water_vapor_flux
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
eastward_water_vapor_transport_across_unit_distance_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
eastward_wind"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
eastward_wind_shear"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Wind shear is the derivative of wind with respect to height.
effective_radius_of_cloud_condensed_water_particles_at_cloud_topThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals,is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. "cloud_top" refers to the top of the highest cloud. "condensed_water" means liquid and ice.
effective_radius_of_cloud_liquid_water_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution.
effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_topThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. cloud_top refers to the top of the highest cloud.
effective_radius_of_convective_cloud_ice_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. Convective cloud is that produced by the convection schemes in an atmosphere model.
effective_radius_of_convective_cloud_liquid_water_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. Convective cloud is that produced by the convection schemes in an atmosphere model.
effective_radius_of_convective_cloud_rain_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. Convective cloud is that produced by the convection schemes in an atmosphere model.
effective_radius_of_convective_cloud_snow_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. Convective cloud is that produced by the convection schemes in an atmosphere model.
effective_radius_of_stratiform_cloud_graupel_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
effective_radius_of_stratiform_cloud_ice_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
effective_radius_of_stratiform_cloud_liquid_water_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
effective_radius_of_stratiform_cloud_rain_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
effective_radius_of_stratiform_cloud_snow_particleThe effective radius of a size distribution of particles, such as aerosols, cloud droplets or ice crystals, is the area weighted mean radius of particle size. It is calculated as the ratio of the third to the second moment of the particle size distribution. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
electrical_mobility_particle_diameterThe diameter of an aerosol particle as selected by its electrical mobility.
enthalpy_content_of_atmosphere_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
equilibrium_line_altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. The equilibrium line is the locus of points on a land ice surface at which ice accumulation balances ice ablation over the year.
equivalent_potential_temperaturePotential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
equivalent_pressure_of_atmosphere_ozone_content"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The equivalent pressure of a particular constituent of the atmosphere is the surface pressure exerted by the weight of that constituent alone.
equivalent_reflectivity_factor"Equivalent reflectivity factor" is the radar reflectivity factor that is calculated from the measured radar return power assuming the target is composed of liquid water droplets whose diameter is less than one tenth of the radar wavelength, i.e., treating the droplets as Rayleigh scatterers. The actual radar reflectivity factor would depend on the size distribution and composition of the particles within the target volume and these are often unknown.
equivalent_temperature
No help available.
equivalent_thickness_at_stp_of_atmosphere_ozone_content
alias: equivalent_thickness_at_stp_of_atmosphere_o3_content
"stp" means standard temperature (0 degC) and pressure (101325 Pa). "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The equivalent thickness at STP of a particular constituent of the atmosphere is the thickness of the layer that the gas would occupy if it was separated from the other constituents and gathered together at STP. equivalent_thickness_at_stp_of_atmosphere_ozone_content is usually measured in Dobson Units which are equivalent to 446.2 micromoles m-2 or an equivalent thickness at STP of 10 micrometers. N.B. Data variables containing column content of ozone can be given the standard name of either equivalent_thickness_at_stp_of_atmosphere_ozone_content or atmosphere_mole_content_of_ozone. The latter name is recommended for consistency with mole content names for chemical species other than ozone.
ertel_potential_vorticity
No help available.
fast_soil_pool_carbon_content"Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. "Soil carbon" is the organic matter present in soil quantified by the mass of carbon it contains. Soil carbon is returned to the atmosphere as the organic matter decays. The decay process takes varying amounts of time depending on the composition of the organic matter, the temperature and the availability of moisture. A carbon "soil pool" means the carbon contained in organic matter which has a characteristic period over which it decays and releases carbon into the atmosphere. "Fast soil pool" refers to the decay of organic matter in soil with a characteristic period of less than ten years under reference climate conditions of a temperature of 20 degrees Celsius and no water limitations.
final_air_pressure_of_lifted_parcelVarious stability and convective potential indices are calculated by "lifting" a parcel of air: moving it dry adiabatically from a starting height (often the surface) to the Lifting Condensation Level, and then wet adiabatically from there to an ending height (often the top of the data/model/atmosphere). original_air_pressure_of_lifted_parcel and final_air_pressure_of_lifted_parcel are the pressure heights at the start and end of lifting, respectively.
floating_ice_thickness"Floating ice" means any ice that is floating on water, e.g. on a sea or lake surface. "Thickness" means the vertical extent of the ice.
forecast_periodForecast period is the time interval between the forecast reference time and the validity time. A period is an interval of time, or the time-period of an oscillation.
forecast_reference_timeThe forecast reference time in NWP is the "data time", the time of the analysis from which the forecast was made. It is not the time for which the forecast is valid; the standard name of time should be used for that time.
fractional_saturation_of_oxygen_in_sea_waterFractional saturation is the ratio of some measure of concentration to the saturated value of the same quantity.
freezing_level_altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
freezing_temperature_of_sea_water
No help available.
frozen_water_content_of_soil_layer"frozen_water" means ice. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).
geoid_height_above_reference_ellipsoidThe geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation. A reference ellipsoid is a regular mathematical figure that approximates the irregular shape of the geoid. A number of reference ellipsoids are defined for use in the field of geodesy.
geopotentialGeopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy.
geopotential_heightGeopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface.
geopotential_height_anomaly"anomaly" means difference from climatology. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface.
geopotential_height_at_volcanic_ash_cloud_topGeopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name "height", which is relative to the surface. "Volcanic_ash" means the fine-grained products of explosive volcanic eruptions, such as minerals or crystals, older fragmented rock (e.g. andesite), and glass. Particles within a volcanic ash cloud have diameters less than 2 mm. "Volcanic_ash" does not include non-volcanic dust.
geostrophic_eastward_wind"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
geostrophic_northward_wind"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
global_average_sea_level_changeGlobal average sea level change is due to change in volume of the water in the ocean, caused by mass and/or density change, or to change in the volume of the ocean basins, caused by tectonics etc. It is sometimes called "eustatic", which is a term that also has other definitions. It differs from the change in the global average sea surface height relative to the centre of the Earth by the global average vertical movement of the ocean floor. Zero sea level change is an arbitrary level.
global_average_steric_sea_level_changeGlobal average steric sea level change is caused by changes in sea water density due to changes in temperature (thermosteric) and salinity (halosteric). Zero sea level change is an arbitrary level.
global_average_thermosteric_sea_level_changeGlobal average thermosteric sea level change is the part caused by change in density due to change in temperature i.e. thermal expansion. Zero sea level change is an arbitrary level.
grid_latitudeLatitude is positive northward; its units of degree_north (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_latitude should be used instead of latitude. Grid latitude is positive in the grid-northward direction, but its units should be plain degree.
grid_longitudeLongitude is positive eastward; its units of degree_east (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_longitude should be used instead of longitude. Grid longitude is positive in the grid-eastward direction, but its units should be plain degree.
gross_primary_productivity_of_biomass_expressed_as_carbon
alias: gross_primary_productivity_of_carbon
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Gross primary production is the rate of synthesis of biomass from inorganic precursors by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton. The producers also respire some of this biomass and the difference is "net_primary_production". "Productivity" means production per unit area. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
harmonic_periodA period is an interval of time, or the time-period of an oscillation.
heat_flux_correctionFlux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
heat_flux_into_sea_water_due_to_freezing_of_frazil_iceIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Frazil" consists of needle like crystals of ice, typically between three and four millimeters in diameter, which form as sea water begins to freeze. Salt is expelled during the freezing process and frazil ice consists of nearly pure fresh water.
heat_flux_into_sea_water_due_to_iceberg_thermodynamicsIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. " Iceberg thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes, i.e., due to melting, sublimation and fusion.
heat_flux_into_sea_water_due_to_newtonian_relaxationThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The heat_flux_into_sea_water_due_to_newtonian_relaxation is the heat flux resulting from the Newtonian relaxation of the sea surface temperature. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
heat_flux_into_sea_water_due_to_sea_ice_thermodynamicsIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Sea ice thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes, i.e., due to melting, sublimation and fusion.
heat_flux_into_sea_water_due_to_snow_thermodynamicsIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Snow thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes, i.e., due to melting, sublimation and fusion.
heightHeight is the vertical distance above the surface.
height_above_reference_ellipsoidHeight is the vertical distance above a surface. A reference ellipsoid is a mathematical figure that approximates the geoid. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. The ellipsoid is an approximation because the geoid is an irregular shape. A number of reference ellipsoids are defined for use in the field of geodesy.
height_above_sea_floor
No help available.
height_at_cloud_topcloud_top refers to the top of the highest cloud. Height is the vertical distance above the surface.
heterotrophic_respiration_carbon_flux"Respiration carbon" refers to the rate at which biomass is respired expressed as the mass of carbon which it contains. Heterotrophic respiration is respiration by heterotrophs ("consumers"), which are organisms (including animals and decomposers) that consume other organisms or dead organic material, rather than synthesising organic material from inorganic precursors using energy from the environment (especially sunlight) as autotrophs ("producers") do. Heterotrophic respiration goes on both above and within the soil. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
high_type_cloud_area_fractionHigh type clouds are: Cirrus, Cirrostratus, Cirrocumulus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is determined on the basis of cloud type and not on the vertical location of the cloud.
histogram_of_backscattering_ratio_over_height_above_reference_ellipsoidScattering of radiation is its deflection from its incident path without loss of energy. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity. "Backscattering ratio" is the ratio of the quantity with standard name volume_attenuated_backwards_scattering_function_in_air to the quantity with standard name volume_attenuated_backwards_scattering_function_in_air_assuming_no_aerosol_or_cloud. "histogram_of_X[_over_Z]" means histogram (i.e. number of counts for each range of X) of variations (over Z) of X. The data variable should have an axis for X.
histogram_of_equivalent_reflectivity_factor_over_height_above_reference_ellipsoid"Equivalent reflectivity factor" is the radar reflectivity factor that is calculated from the measured radar return power assuming the target is composed of liquid water droplets whose diameter is less than one tenth of the radar wavelength, i.e., treating the droplets as Rayleigh scatterers. The actual radar reflectivity factor would depend on the size distribution and composition of the particles within the target volume and these are often unknown. "histogram_of_X[_over_Z]" means histogram (i.e. number of counts for each range of X) of variations (over Z) of X. The data variable should have an axis for X. A reference ellipsoid is a regular mathematical figure that approximates the irregular shape of the geoid. A number of reference ellipsoids are defined for use in the field of geodesy.
horizontal_atmosphere_dry_energy_transportDry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
horizontal_dry_energy_transport_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
humidity_mixing_ratioHumidity mixing ratio of a parcel of moist air is the ratio of the mass of water vapor to the mass of dry air.
integral_of_air_temperature_deficit_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. The air temperature deficit is the air temperature threshold minus the air temperature. Its integral with respect to time is often called after its units of "degree-days".
integral_of_air_temperature_excess_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. The air temperature excess is the air temperature minus the air temperature threshold. Its integral with respect to time is often called after its units of "degree-days".
integral_of_sea_ice_temperature_wrt_depth_expressed_as_heat_content"Content" indicates a quantity per unit area. Depth is the vertical distance below the surface. The quantity with standard name integral_of_sea_ice_temperature_wrt_depth_expressed_as_heat_content is calculated relative to the heat content of ice at zero degrees Celsius, which is assumed to have a heat content of zero Joules. "integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to.
integral_of_sea_water_potential_temperature_wrt_depth_expressed_as_heat_content"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "expressed_as_heat_content" means that this quantity is calculated as the (assumed constant) specific heat capacity times density of sea water multiplied by the integral, over the specified layer of the ocean, of the sea water potential temperature wrt depth.
integral_of_sea_water_temperature_wrt_depth_in_ocean_layer"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Depth is the vertical distance below the surface. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
integral_of_surface_downward_eastward_stress_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface.
integral_of_surface_downward_latent_heat_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_surface_downward_northward_stress_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface.
integral_of_surface_downward_sensible_heat_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_surface_downwelling_longwave_flux_in_air_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_surface_downwelling_shortwave_flux_in_air_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Surface downwelling shortwave is the sum of direct and diffuse solar radiation incident on the surface, and is sometimes called "global radiation". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_surface_net_downward_longwave_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Longwave" means longwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_surface_net_downward_shortwave_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Shortwave" means shortwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_toa_net_downward_shortwave_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). "Shortwave" means shortwave radiation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_of_toa_outgoing_longwave_flux_wrt_time"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. "toa" means top of atmosphere. "Longwave" means longwave radiation. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
integral_wrt_depth_of_tendency_of_sea_water_alkalinity_expressed_as_mole_equivalentDepth is the vertical distance below the surface. 'sea_water_alkalinity_expressed_as_mole_equivalent' is the total alkalinity equivalent concentration (including carbonate, nitrogen, silicate, and borate components). "tendency_of_X" means derivative of X with respect to time. "wrt" means with respect to.
integral_wrt_depth_of_tendency_of_sea_water_alkalinity_expressed_as_mole_equivalent_due_to_biological_processesDepth is the vertical distance below the surface. 'sea_water_alkalinity_expressed_as_mole_equivalent' is the total alkalinity equivalent concentration (including carbonate, nitrogen, silicate, and borate components). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "wrt" means with respect to.
isccp_cloud_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. The ISCCP cloud area fraction is diagnosed from atmosphere model output by the ISCCP simulator software in such a way as to be comparable with the observational diagnostics of ISCCP (the International Satellite Cloud Climatology Project).
isotropic_longwave_radiance_in_air
alias: longwave_radiance
"longwave" means longwave radiation. Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead.
isotropic_radiance_per_unit_wavelength_in_air
alias: isotropic_spectral_radiance_in_air
alias: spectral_radiance
Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
isotropic_shortwave_radiance_in_air
alias: shortwave_radiance
"shortwave" means shortwave radiation. Radiance is the radiative flux in a particular direction, per unit of solid angle. If radiation is isotropic, the radiance is independent of direction, so the direction should not be specified. If the radiation is directionally dependent, a standard name of upwelling or downwelling radiance should be chosen instead.
kinetic_energy_content_of_atmosphere_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
kinetic_energy_dissipation_in_atmosphere_boundary_layer
alias: dissipation_in_atmosphere_boundary_layer
No help available.
lagrangian_tendency_of_air_pressure
alias: omega
alias: vertical_air_velocity_expressed_as_tendency_of_pressure
"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.
lagrangian_tendency_of_atmosphere_sigma_coordinate
alias: upward_air_velocity_expressed_as_tendency_of_sigma
alias: vertical_air_velocity_expressed_as_tendency_of_sigma
"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of sigma plays the role of the upward component of air velocity when the atmosphere sigma coordinate (a dimensionless atmosphere vertical coordinate) is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of sigma; downwards is positive. See Appendix D of the CF convention for information about dimensionless vertical coordinates.
land_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.
land_binary_maskX_binary_mask has 1 where condition X is met, 0 elsewhere. 1 = land, 0 = sea.
land_cover_lccsA variable with the standard name of land_cover_sccs contains strings which indicate the nature of the surface, e.g. cropland_..., tree_... . These strings are standardised. Values must be combinations of classifiers from the Land Cover Classification System (LCCS; Di Gregorio A., 2005, UN Land Cover Classification System (LCCS) - Classification concepts and user manual for Software version 2; available at www.fao.org/DOCREP/003/X0596E/X0596e00.htm).
land_ice_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_basal_melt_rate"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The land ice basal melt rate is the rate at which ice is lost per unit area at the base of the ice.
land_ice_basal_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_basal_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_calving_rate"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The land ice calving rate is the rate at which ice is lost per unit area through calving into the ocean.
land_ice_lwe_basal_melt_rate"lwe" means liquid water equivalent. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The land ice basal melt rate is the rate at which ice is lost per unit area at the base of the ice.
land_ice_lwe_calving_rate"lwe" means liquid water equivalent. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The land ice calving rate is the rate at which ice is lost per unit area through calving into the ocean.
land_ice_lwe_surface_specific_mass_balance_rate
alias: land_ice_lwe_surface_specific_mass_balance
"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. "lwe" means liquid water equivalent. Specific mass balance means the net rate at which ice is added per unit area at the land ice surface due to all processes of surface accumulation and ablation. A negative value means loss of ice.
land_ice_sigma_coordinate"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_surface_specific_mass_balance_flux"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. Specific mass balance means the net rate at which ice is added per unit area at the land ice surface. A negative value means loss of ice. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
land_ice_surface_specific_mass_balance_rate
alias: land_ice_surface_specific_mass_balance
"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. Specific mass balance means the net rate at which ice is added at the land ice surface due to all processes of surface accumulation and ablation. A negative value means loss of ice.
land_ice_temperature"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_thickness"Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. "Thickness" means the vertical extent of a layer.
land_ice_vertical_mean_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The vertical mean land ice velocity is the average from the bedrock to the surface of the ice.
land_ice_vertical_mean_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. The vertical mean land ice velocity is the average from the bedrock to the surface of the ice.
land_ice_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
land_ice_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves.
latitudeLatitude is positive northward; its units of degree_north (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_latitude should be used instead of latitude. Grid latitude is positive in the grid-northward direction, but its units should be plain degree.
leaf_area_index"X_area" means the horizontal area occupied by X within the grid cell.
leaf_carbon_content"Content" indicates a quantity per unit area.
liquid_water_content_of_permafrost_layer"Content" indicates a quantity per unit area. Permafrost is soil or rock that has remained at a temperature at or below zero degrees Celsius throughout the seasonal cycle for two or more years.
liquid_water_content_of_soil_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).
liquid_water_content_of_surface_snow
alias: liquid_water_content_of_snow_layer
"Content" indicates a quantity per unit area. The surface called "surface" means the lower boundary of the atmosphere.
litter_carbon_content"Content" indicates a quantity per unit area. "Litter carbon" is dead inorganic material in or above the soil quantified as the mass of carbon which it contains.
litter_carbon_flux"Litter carbon" is dead inorganic material in or above the soil quantified as the mass of carbon which it contains. The litter carbon flux is the rate of production of litter. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
log10_size_interval_based_number_size_distribution_of_cloud_condensation_nuclei_at_stp_in_airThe cloud condensation nuclei number size distribution is the number concentration of aerosol particles, normalised to the decadal logarithmic size interval the concentration applies to, as a function of particle diameter, where the particle acts as condensation nucleus for liquid-phase clouds. A coordinate variable with the standard name of relative_humidity should be specified to indicate that the property refers to a specific supersaturation with respect to liquid water. A coordinate variable with the standard name of electrical_mobility_particle_diameter should be specified to indicate that the property applies at specific mobility particle sizes. To specify the relative humidity at which the particle sizes were selected, provide a scalar coordinate variable with the standard name of relative_humidity_for_aerosol_particle_size_selection. The ability of a particle to act as a condensation nucleus is determined by its size, chemical composition, and morphology. "log10_X" means common logarithm (i.e. base 10) of X. "stp" means standard temperature (0 degC) and pressure (101325 Pa).
longitudeLongitude is positive eastward; its units of degree_east (or equivalent) indicate this explicitly. In a latitude-longitude system defined with respect to a rotated North Pole, the standard name of grid_longitude should be used instead of longitude. Grid longitude is positive in the grid-eastward direction, but its units should be plain degree.
low_type_cloud_area_fractionLow type clouds are: Stratus, Stratocumulus, Cumulus, Cumulonimbus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is determined on the basis of cloud type and not on the vertical location of the cloud.
lwe_convective_precipitation_rate"lwe" means liquid water equivalent.
lwe_convective_snowfall_rate"lwe" means liquid water equivalent.
lwe_precipitation_rate"lwe" means liquid water equivalent.
lwe_snowfall_rate"lwe" means liquid water equivalent.
lwe_stratiform_precipitation_rate
alias: lwe_large_scale_precipitation_rate
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "lwe" means liquid water equivalent.
lwe_stratiform_snowfall_rate
alias: lwe_large_scale_snowfall_rate
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "lwe" means liquid water equivalent.
lwe_thickness_of_atmosphere_mass_content_of_water_vapor
alias: lwe_thickness_of_atmosphere_water_vapor_content
"lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
lwe_thickness_of_canopy_water_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. "Canopy" means the plant or vegetation canopy. The canopy water is the water on the canopy.
lwe_thickness_of_convective_precipitation_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.
lwe_thickness_of_convective_snowfall_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.
lwe_thickness_of_frozen_water_content_of_soil_layer"frozen_water" means ice. "lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).
lwe_thickness_of_moisture_content_of_soil_layer"lwe" means liquid water equivalent. "moisture" means water in all phases contained in soil. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).
lwe_thickness_of_precipitation_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.
lwe_thickness_of_snowfall_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area.
lwe_thickness_of_soil_moisture_content"lwe" means liquid water equivalent. "moisture" means water in all phases contained in soil. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used.
lwe_thickness_of_stratiform_precipitation_amount
alias: lwe_thickness_of_large_scale_precipitation_amount
"Amount" means mass per unit area. "lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
lwe_thickness_of_stratiform_snowfall_amount
alias: lwe_thickness_of_large_scale_snowfall_amount
"Amount" means mass per unit area. "lwe" means liquid water equivalent. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
lwe_thickness_of_surface_snow_amountThe surface called "surface" means the lower boundary of the atmosphere. "lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.
lwe_thickness_of_water_evaporation_amount"lwe" means liquid water equivalent. "Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)
lwe_water_evaporation_rate"lwe" means liquid water equivalent. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)
magnitude_of_derivative_of_position_wrt_model_level_numberThe quantity with standard name magnitude_of_derivative_of_position_wrt_model_level_number (known in differential geometry as a "scale factor") is | (dr/dk)ij|, where r(i,j,k) is the vector 3D position of the point with coordinate indices (i,j,k). It is a measure of the gridblock spacing in the z-direction.
magnitude_of_derivative_of_position_wrt_x_coordinate_indexThe quantity with standard name magnitude_of_derivative_of_position_wrt_x_coordinate_index (known in differential geometry as a "scale factor") is | (dr/di)jk|, where r(i,j,k) is the vector 3D position of the point with coordinate indices (i,j,k). It is a measure of the gridblock spacing in the x-direction.
magnitude_of_derivative_of_position_wrt_y_coordinate_indexThe quantity with standard name magnitude_of_derivative_of_position_wrt_y_coordinate_index (known in differential geometry as a "scale factor") is | (dr/dj)ik|, where r(i,j,k) is the vector 3D position of the point with coordinate indices (i,j,k). It is a measure of the gridblock spacing in the y-direction.
magnitude_of_heat_flux_in_sea_water_due_to_advection"magnitude_of_X" means magnitude of a vector X. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
magnitude_of_sea_ice_displacement
alias: sea_ice_displacement
"magnitude_of_X" means magnitude of a vector X. 'Displacement' means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component.
magnitude_of_surface_downward_stressThe surface called "surface" means the lower boundary of the atmosphere. "magnitude_of_X" means magnitude of a vector X. "Downward" indicates a vector component which is positive when directed downward (negative upward).
mass_concentration_of_acetic_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
mass_concentration_of_aceto_nitrile_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
mass_concentration_of_alkanes_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Alkanes are saturated hydrocarbons, i.e. they do not contain any chemical double bonds. Alkanes contain only hydrogen and carbon combined in the general proportions C(n)H(2n+2); "alkanes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkane species, e.g., methane and ethane.
mass_concentration_of_alkenes_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Alkenes are unsaturated hydrocarbons as they contain chemical double bonds between adjacent carbon atoms. Alkenes contain only hydrogen and carbon combined in the general proportions C(n)H(2n); "alkenes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkene species, e.g., ethene and propene.
mass_concentration_of_alpha_hexachlorocyclohexane_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
mass_concentration_of_alpha_pinene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
mass_concentration_of_ammonia_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ammonia is NH3.
mass_concentration_of_ammonium_dry_aerosol_particles_in_air
alias: mass_concentration_of_ammonium_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for ammonium is NH4.
mass_concentration_of_anthropogenic_nmvoc_expressed_as_carbon_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity.
mass_concentration_of_aromatic_compounds_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Aromatic compounds in organic chemistry are compounds that contain at least one benzene ring of six carbon atoms joined by alternating single and double covalent bonds. The simplest aromatic compound is benzene itself. In standard names "aromatic_compounds" is the term used to describe the group of aromatic chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aromatic species, e.g. benzene and xylene.
mass_concentration_of_atomic_bromine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic bromine is Br.
mass_concentration_of_atomic_chlorine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic chlorine is Cl.
mass_concentration_of_atomic_nitrogen_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic nitrogen is N.
mass_concentration_of_benzene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
mass_concentration_of_beta_pinene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
mass_concentration_of_biogenic_nmvoc_expressed_as_carbon_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes.
mass_concentration_of_biomass_burning_dry_aerosol_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_concentration_of_bromine_chloride_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine chloride is BrCl.
mass_concentration_of_bromine_monoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine monoxide is BrO.
mass_concentration_of_bromine_nitrate_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine nitrate is BrONO2.
mass_concentration_of_brox_expressed_as_bromine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with the exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_concentration_of_butane_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_concentration_of_calcareous_phytoplankton_expressed_as_chlorophyll_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. 'Calcareous phytoplankton' are phytoplankton that produce calcite. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_carbon_dioxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for carbon dioxide is CO2.
mass_concentration_of_carbon_monoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon monoxide is CO.
mass_concentration_of_carbon_tetrachloride_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon tetrachloride is CCl4.
mass_concentration_of_cfc113a_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
mass_concentration_of_cfc113_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
mass_concentration_of_cfc114_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
mass_concentration_of_cfc115_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
mass_concentration_of_cfc11_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
mass_concentration_of_cfc12_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
mass_concentration_of_chlorine_dioxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine dioxide is OClO.
mass_concentration_of_chlorine_monoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine monoxide is ClO.
mass_concentration_of_chlorine_nitrate_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine nitrate is ClONO2.
mass_concentration_of_chlorophyll_a_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. Chlorophyll-a is the most commonly occurring form of natural chlorophyll. The chemical formula of chlorophyll-a is C55H72O5N4Mg.
mass_concentration_of_chlorophyll_in_sea_water
alias: chlorophyll_concentration_in_sea_water
alias: concentration_of_chlorophyll_in_sea_water
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms.
mass_concentration_of_cloud_liquid_water_in_airMass concentration means mass per unit volume and is used in the construction "mass_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Cloud droplets are spherical and typically a few micrometers to a few tens of micrometers in diameter. An upper limit of 0.2 mm diameter is sometimes used to distinguish between cloud droplets and drizzle drops, but in active cumulus clouds strong updrafts can maintain much larger cloud droplets.
mass_concentration_of_clox_expressed_as_chlorine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Clox" describes a family of chemical species consisting of inorganic chlorine compounds with the exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_concentration_of_coarse_mode_ambient_aerosol_particles_in_air
alias: mass_concentration_of_coarse_mode_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. Coarse mode aerosol particles have a diameter of more than 1 micrometer.
mass_concentration_of_condensed_water_in_soilMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. Condensed water means liquid and ice.
mass_concentration_of_diatoms_expressed_as_carbon_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_diatoms_expressed_as_chlorophyll_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B containedin A, neglecting all other chemical constituents of A. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_diatoms_expressed_as_nitrogen_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_diazotrophs_expressed_as_chlorophyll_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are autotrophic prokaryotic or eukaryotic organisms that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_dichlorine_peroxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dichlorine peroxide is Cl2O2.
mass_concentration_of_dimethyl_sulfide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
mass_concentration_of_dinitrogen_pentoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dinitrogen pentoxide is N2O5.
mass_concentration_of_drizzle_in_airMass concentration means mass per unit volume and is used in the construction "mass_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Drizzle" means drops of water falling through the atmosphere that have a diameter typically in the range 0.2-0.5 mm.
mass_concentration_of_dust_dry_aerosol_particles_in_air
alias: mass_concentration_of_dust_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_concentration_of_elemental_carbon_dry_aerosol_particles_in_air
alias: mass_concentration_of_black_carbon_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
mass_concentration_of_ethane_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_concentration_of_ethanol_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethanol is C2H5OH.
mass_concentration_of_ethene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
mass_concentration_of_ethyne_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
mass_concentration_of_flagellates_expressed_as_carbon_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. 'Flagellates' are a class of single celled organisms that use a flagellum (whip-like structure) for feeding and locomotion. Some flagellates can photosynthesize and others feed on bacteria, with a few flagellatescapable of both.
mass_concentration_of_flagellates_expressed_as_nitrogen_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. 'Flagellates' are a class of single celled organisms that use a flagellum (whip-like structure) for feeding and locomotion. Some flagellates can photosynthesize and others feed on bacteria, with a few flagellatescapable of both.
mass_concentration_of_formaldehyde_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
mass_concentration_of_formic_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
mass_concentration_of_gaseous_divalent_mercury_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
mass_concentration_of_gaseous_elemental_mercury_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for mercury is Hg.
mass_concentration_of_halon1202_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
mass_concentration_of_halon1211_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
mass_concentration_of_halon1301_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
mass_concentration_of_halon2402_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
mass_concentration_of_hcc140a_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
mass_concentration_of_hcfc141b_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
mass_concentration_of_hcfc142b_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
mass_concentration_of_hcfc22_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
mass_concentration_of_hexachlorobiphenyl_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings, each of which is additionally bonded to three chlorine atoms.
mass_concentration_of_hox_expressed_as_hydrogen_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_concentration_of_hydrogen_bromide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen bromide is HBr.
mass_concentration_of_hydrogen_chloride_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen chloride is HCl.
mass_concentration_of_hydrogen_cyanide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen cyanide is HCN.
mass_concentration_of_hydrogen_peroxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen peroxide is H2O2.
mass_concentration_of_hydroperoxyl_radical_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_concentration_of_hydroxyl_radical_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_concentration_of_hypobromous_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypobromous acid is HOBr.
mass_concentration_of_hypochlorous_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypochlorous acid is HOCl.
mass_concentration_of_inorganic_bromine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
mass_concentration_of_inorganic_chlorine_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox" are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
mass_concentration_of_inorganic_nitrogen_in_sea_water'Mass concentration' means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. 'Inorganic nitrogen' describes a family of chemical species which, in an ocean model, usually includes nitrite, nitrate and ammonium which act as nitrogen nutrients. 'Inorganic nitrogen' is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mass_concentration_of_isoprene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
mass_concentration_of_limonene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
mass_concentration_of_liquid_water_in_airMass concentration means mass per unit volume and is used in the construction "mass_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The mass concentration of liquid water takes into account all cloud droplets and liquid precipitation regardless of drop size or fall speed.
mass_concentration_of_mercury_dry_aerosol_particles_in_air
alias: mass_concentration_of_mercury_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_concentration_of_methane_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_concentration_of_methanol_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methanol is CH3OH.
mass_concentration_of_methyl_bromide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
mass_concentration_of_methyl_chloride_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
mass_concentration_of_methyl_hydroperoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl hydroperoxide is CH3OOH.
mass_concentration_of_methyl_peroxy_radical_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_concentration_of_miscellaneous_phytoplankton_expressed_as_chlorophyll_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. 'Miscellaneous phytoplankton' are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other seperately named components of the phytoplankton population. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_molecular_hydrogen_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for molecular hydrogen is H2.
mass_concentration_of_nitrate_dry_aerosol_particles_in_air
alias: mass_concentration_of_nitrate_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for the nitrate anion is NO3-.
mass_concentration_of_nitrate_radical_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_concentration_of_nitric_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitric acid is HNO3.
mass_concentration_of_nitric_acid_trihydrate_ambient_aerosol_particles_in_air
alias: mass_concentration_of_nitric_acid_trihydrate_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
mass_concentration_of_nitrogen_dioxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen dioxide is NO2.
mass_concentration_of_nitrogen_monoxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen monoxide is NO.
mass_concentration_of_nitrous_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous acid is HNO2.
mass_concentration_of_nitrous_oxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous oxide is N2O.
mass_concentration_of_nmvoc_expressed_as_carbon_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mass_concentration_of_nox_expressed_as_nitrogen_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_concentration_of_noy_expressed_as_nitrogen_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_concentration_of_organic_detritus_expressed_as_carbon_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Organic detritus are particles of debris from decaying plants and animals.
mass_concentration_of_organic_detritus_expressed_as_nitrogen_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Organic detritus are particles of debris from decaying plants and animals.
mass_concentration_of_oxygenated_hydrocarbons_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Oxygenated" means containing oxygen. "Hydrocarbon" means a compound containing hydrogen and carbon.
mass_concentration_of_oxygen_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y.
mass_concentration_of_ozone_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ozone is O3.
mass_concentration_of_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_concentration_of_particulate_organic_matter_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_concentration_of_peroxyacetyl_nitrate_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
mass_concentration_of_peroxynitric_acid_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
mass_concentration_of_peroxy_radicals_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The term "peroxy_radicals" means all organic and inorganic peroxy radicals. This includes HO2 and all organic peroxy radicals, sometimes referred to as RO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_concentration_of_phosphate_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mass_concentration_of_phytoplankton_expressed_as_chlorophyll_in_sea_waterMass concentration means mass per unit volume and is used in the construction "mass_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. Standard names also exist for the mass concentration of a number of components that make up the total phytoplankton population, such as diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton and miscellaneous phytoplankton. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms.
mass_concentration_of_picophytoplankton_expressed_as_chlorophyll_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally. All contain a chlorin ring (chemical formula C20H16N4) which gives the green pigment and a side chain whose structure varies. The naturally occurring forms of chlorophyll contain between 35 and 55 carbon atoms. Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mass_concentration_of_pm10_ambient_aerosol_particles_in_air
alias: mass_concentration_of_pm10_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature."
mass_concentration_of_pm1_ambient_aerosol_particles_in_air
alias: mass_concentration_of_pm1_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of "relative_humidity" and "air_temperature".
mass_concentration_of_pm2p5_ambient_aerosol_particles_in_air
alias: mass_concentration_of_pm2p5_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of "relative_humidity" and "air_temperature."
mass_concentration_of_primary_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_concentration_of_primary_particulate_organic_matter_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_concentration_of_propane_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_concentration_of_propene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
mass_concentration_of_radon_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for radon is Rn.
mass_concentration_of_rain_in_airMass concentration means mass per unit volume and is used in the construction "mass_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Rain" means drops of water falling through the atmosphere that have a diameter greater than 0.5 mm.
mass_concentration_of_seasalt_dry_aerosol_particles_in_air
alias: mass_concentration_of_seasalt_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_concentration_of_secondary_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_concentration_of_secondary_particulate_organic_matter_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter" means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_concentration_of_silicate_in_sea_waterMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mass_concentration_of_sulfate_ambient_aerosol_particles_in_air
alias: mass_concentration_of_sulfate_ambient_aerosol_in_air
alias: mass_concentration_of_sulfate_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature".
mass_concentration_of_sulfate_dry_aerosol_particles_in_air
alias: mass_concentration_of_sulfate_dry_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for the sulfate anion is SO4(2-).
mass_concentration_of_sulfur_dioxide_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for sulfur dioxide is SO2.
mass_concentration_of_suspended_matter_in_sea_water
alias: concentration_of_suspended_matter_in_sea_water
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mass_concentration_of_terpenes_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Terpenes are hydrocarbons, that is, they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. The term "terpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual terpene species, e.g., isoprene and limonene.
mass_concentration_of_toluene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
mass_concentration_of_water_in_ambient_aerosol_particles_in_air
alias: mass_concentration_of_water_in_ambient_aerosol_in_air
Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles.
mass_concentration_of_water_vapor_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mass_concentration_of_xylene_in_airMass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
mass_content_of_cloud_condensed_water_in_atmosphere_layer
alias: cloud_condensed_water_content_of_atmosphere_layer
"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
mass_content_of_cloud_ice_in_atmosphere_layer
alias: cloud_ice_content_of_atmosphere_layer
"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
mass_content_of_cloud_liquid_water_in_atmosphere_layer
alias: cloud_liquid_water_content_of_atmosphere_layer
"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
mass_content_of_water_in_atmosphere_layer
alias: water_content_of_atmosphere_layer
"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Water" means water in all phases.
mass_content_of_water_vapor_in_atmosphere_layer
alias: water_vapor_content_of_atmosphere_layer
"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
mass_fraction_of_acetic_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
mass_fraction_of_aceto_nitrile_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
mass_fraction_of_alkanes_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Alkanes are saturated hydrocarbons, i.e. they do not contain any chemical double bonds. Alkanes contain only hydrogen and carbon combined in the general proportions C(n)H(2n+2); "alkanes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkane species, e.g., methane and ethane.
mass_fraction_of_alkenes_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Alkenes are unsaturated hydrocarbons as they contain chemical double bonds between adjacent carbon atoms. Alkenes contain only hydrogen and carbon combined in the general proportions C(n)H(2n); "alkenes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkene species, e.g., ethene and propene.
mass_fraction_of_alpha_hexachlorocyclohexane_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
mass_fraction_of_alpha_pinene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
mass_fraction_of_ammonia_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ammonia is NH3.
mass_fraction_of_ammonium_dry_aerosol_particles_in_air
alias: mass_fraction_of_ammonium_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_ammonium" means that the mass is expressed as mass of NH4. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_anthropogenic_nmvoc_expressed_as_carbon_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity.
mass_fraction_of_aromatic_compounds_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Aromatic compounds in organic chemistry are compounds that contain at least one benzene ring of six carbon atoms joined by alternating single and double covalent bonds. The simplest aromatic compound is benzene itself. In standard names "aromatic_compounds" is the term used to describe the group of aromatic chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aromatic species, e.g. benzene and xylene.
mass_fraction_of_atomic_bromine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic bromine is Br.
mass_fraction_of_atomic_chlorine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic chlorine is Cl.
mass_fraction_of_atomic_nitrogen_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic nitrogen is N.
mass_fraction_of_benzene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
mass_fraction_of_beta_pinene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
mass_fraction_of_biogenic_nmvoc_expressed_as_carbon_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes.
mass_fraction_of_bromine_chloride_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine chloride is BrCl.
mass_fraction_of_bromine_monoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine monoxide is BrO.
mass_fraction_of_bromine_nitrate_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine nitrate is BrONO2.
mass_fraction_of_brox_expressed_as_bromine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with the exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompaniedby a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are usedfor quantities that contain all inorganic bromine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_fraction_of_butane_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_fraction_of_carbon_dioxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for carbon dioxide is CO2.
mass_fraction_of_carbon_monoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon monoxide is CO.
mass_fraction_of_carbon_tetrachloride_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon tetrachloride is CCl4.
mass_fraction_of_cfc113a_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
mass_fraction_of_cfc113_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
mass_fraction_of_cfc114_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
mass_fraction_of_cfc115_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
mass_fraction_of_cfc11_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
mass_fraction_of_cfc12_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
mass_fraction_of_chlorine_dioxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine dioxide is OClO.
mass_fraction_of_chlorine_monoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine monoxide is ClO.
mass_fraction_of_chlorine_nitrate_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine nitrate is ClONO2.
mass_fraction_of_chlorophyll_a_in_sea_waterMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Chlorophylls are the green pigments found in most plants, algae and cyanobacteria; their presence is essential for photosynthesis to take place. There are several different forms of chlorophyll that occur naturally; all contain a chlorin ring which gives the green pigment and a side chain whose structure varies. Chlorophyll-a is the most commonly occurring form of natural chlorophyll.
mass_fraction_of_cloud_condensed_water_in_air"condensed_water" means liquid and ice. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_cloud_ice_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_cloud_liquid_water_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_clox_expressed_as_chlorine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Clox" describes a familyof chemical species consisting of inorganic chlorine compounds with the exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantitiesthat contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A.It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_fraction_of_convective_cloud_condensed_water_in_air
alias: mass_fraction_of_convective_condensed_water_in_air
"condensed_water" means liquid and ice. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_convective_cloud_ice_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). Convective cloud is that produced by the convection schemes in an atmosphere model.
mass_fraction_of_convective_cloud_liquid_water_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). Convective cloud is that produced by the convection schemes in an atmosphere model.
mass_fraction_of_dichlorine_peroxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dichlorineperoxide is Cl2O2.
mass_fraction_of_dimethyl_sulfide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_dinitrogen_pentoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dinitrogenpentoxide is N2O5.
mass_fraction_of_dust_dry_aerosol_particles_in_air
alias: mass_fraction_of_dust_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_elemental_carbon_dry_aerosol_particles_in_air
alias: mass_fraction_of_black_carbon_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
mass_fraction_of_ethane_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standardnames for the alkane group as well as for some of the individual species.
mass_fraction_of_ethanol_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethanol isC2H5OH.
mass_fraction_of_ethene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standardnames for the alkene group as well as for some of the individual species.
mass_fraction_of_ethyne_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
mass_fraction_of_formaldehyde_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
mass_fraction_of_formic_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
mass_fraction_of_frozen_water_in_soil_moisture"frozen_water" means ice. "moisture" means water in all phases contained in soil. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_gaseous_divalent_mercury_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
mass_fraction_of_gaseous_elemental_mercury_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for mercury is Hg.
mass_fraction_of_graupel_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_halon1202_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
mass_fraction_of_halon1211_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
mass_fraction_of_halon1301_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
mass_fraction_of_halon2402_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
mass_fraction_of_hcc140a_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hcc140a isCH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
mass_fraction_of_hcfc141b_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
mass_fraction_of_hcfc142b_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
mass_fraction_of_hcfc22_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
mass_fraction_of_hexachlorobiphenyl_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings,each of which is additionally bonded to three chlorine atoms.
mass_fraction_of_hox_expressed_as_hydrogen_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_fraction_of_hydrogen_bromide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen bromide is HBr.
mass_fraction_of_hydrogen_chloride_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen chloride is HCl.
mass_fraction_of_hydrogen_cyanide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen cyanide is HCN.
mass_fraction_of_hydrogen_peroxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen peroxide is H2O2.
mass_fraction_of_hydroperoxyl_radical_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_fraction_of_hydroxyl_radical_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived,species.
mass_fraction_of_hypobromous_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypobromous acid is HOBr.
mass_fraction_of_hypochlorous_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypochlorous acid is HOCl.
mass_fraction_of_inorganic_bromine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
mass_fraction_of_inorganic_chlorine_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the termused in standard names for all species belonging to the family that are represented withina given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox" are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
mass_fraction_of_isoprene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
mass_fraction_of_limonene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for theterpene group as well as for some of the individual species.
mass_fraction_of_mercury_dry_aerosol_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_methane_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methane isCH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_fraction_of_methanesulfonic_acid_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The chemical formula for methanesulfonic acid is CH3SO3H.
mass_fraction_of_methanol_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethanol isC2H5OH. The chemical formula for methanol is CH3OH.
mass_fraction_of_methyl_bromide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
mass_fraction_of_methyl_chloride_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
mass_fraction_of_methyl_hydroperoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl hydroperoxide is CH3OOH.
mass_fraction_of_methyl_peroxy_radical_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_fraction_of_molecular_hydrogen_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for molecular hydrogen is H2.
mass_fraction_of_nitrate_dry_aerosol_particles_in_air
alias: mass_fraction_of_nitrate_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_nitrate" means that the mass is expressed as mass of NO3. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_nitrate_radical_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_fraction_of_nitric_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitric acid is HNO3.
mass_fraction_of_nitric_acid_trihydrate_ambient_aerosol_particles_in_air
alias: mass_fraction_of_nitric_acid_trihydrate_ambient_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
mass_fraction_of_nitrogen_dioxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen dioxide is NO2.
mass_fraction_of_nitrogen_monoxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen monoxide is NO.
mass_fraction_of_nitrous_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous acid is HNO2.
mass_fraction_of_nitrous_oxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous oxide is N2O.
mass_fraction_of_nmvoc_expressed_as_carbon_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mass_fraction_of_nox_expressed_as_nitrogen_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The term "peroxy_radicals" means all organic and inorganic peroxy radicals. This includes HO2 and all organic peroxyradicals, sometimes referred to as RO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_fraction_of_noy_expressed_as_nitrogen_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mass_fraction_of_oxygenated_hydrocarbons_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Oxygenated" means containing oxygen. "Hydrocarbon" means a compound containing hydrogen and carbon.
mass_fraction_of_ozone_in_air
alias: mass_fraction_of_o3_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_fraction_of_particulate_organic_matter_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_peroxyacetyl_nitrate_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
mass_fraction_of_peroxynitric_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
mass_fraction_of_peroxy_radicals_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The term "peroxy_radicals" means all organic and inorganic peroxy radicals. This includes HO2 and all organic peroxyradicals, sometimes referred to as RO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mass_fraction_of_pm10_ambient_aerosol_particles_in_air
alias: mass_fraction_of_pm10_ambient_aerosol_in_air
alias: mass_fraction_of_pm10_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of "relative_humidity" and "air_temperature."
mass_fraction_of_pm10_ammonium_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The chemical formula for ammonium is NH4.
mass_fraction_of_pm10_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers.
mass_fraction_of_pm10_dust_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers.
mass_fraction_of_pm10_elemental_carbon_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
mass_fraction_of_pm10_nitrate_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The chemical formula for the nitrate anion is NO3-.
mass_fraction_of_pm10_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm10_particulate_organic_matter_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm10_primary_particulate_organic_matter_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. "Primary particulate organic matter" means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm10_sea_salt_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers.
mass_fraction_of_pm10_sulfate_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The chemical formula for the sulfate anion is SO4(2-).
mass_fraction_of_pm1_ambient_aerosol_particles_in_air
alias: mass_fraction_of_pm1_ambient_aerosol_in_air
alias: mass_fraction_of_pm1_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of "relative_humidity" and "air_temperature".
mass_fraction_of_pm1_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm1 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 1 micrometer.
mass_fraction_of_pm2p5_ambient_aerosol_particles_in_air
alias: mass_fraction_of_pm2p5_ambient_aerosol_in_air
alias: mass_fraction_of_pm2p5_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of "relative_humidity" and "air_temperature".
mass_fraction_of_pm2p5_ammonium_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The chemical formula for ammonium is NH4.
mass_fraction_of_pm2p5_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers.
mass_fraction_of_pm2p5_dust_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers.
mass_fraction_of_pm2p5_elemental_carbon_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
mass_fraction_of_pm2p5_nitrate_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The chemical formula for the nitrate anion is NO3-.
mass_fraction_of_pm2p5_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm2p5_particulate_organic_matter_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm2p5_primary_particulate_organic_matter_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. "Primary particulate organic matter" means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_fraction_of_pm2p5_sea_salt_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers.
mass_fraction_of_pm2p5_sulfate_dry_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The chemical formula for the sulfate anion is SO4(2-).
mass_fraction_of_precipitation_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_primary_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_fraction_of_primary_particulate_organic_matter_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_fraction_of_propane_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propane isC3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mass_fraction_of_propene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propene isC3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
mass_fraction_of_radon_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for radon is Rn.
mass_fraction_of_rain_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_seasalt_dry_aerosol_particles_in_air
alias: mass_fraction_of_seasalt_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_particles_in_air
alias: mass_fraction_of_secondary_particulate_organic_matter_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter" means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol.
mass_fraction_of_snow_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_stratiform_cloud_ice_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
mass_fraction_of_stratiform_cloud_liquid_water_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
mass_fraction_of_sulfate_dry_aerosol_particles_in_air
alias: mass_fraction_of_sulfate_dry_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Mass_fraction_of_sulfate" means that the mass is expressed as mass of SO4. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake.
mass_fraction_of_sulfur_dioxide_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_sulfuric_acid_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mass_fraction_of_terpenes_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Terpenes are hydrocarbons, that is,they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. The term "terpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual terpene species, e.g., isoprene and limonene.
mass_fraction_of_toluene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for toluene isC6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atomsis replaced by a methyl group. The systematic name for toluene is methylbenzene.
mass_fraction_of_unfrozen_water_in_soil_moisture"moisture" means water in all phases contained in soil. "unfrozen_water" means liquid and vapour. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_water_in_air"Water" means water in all phases. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
mass_fraction_of_water_in_ambient_aerosol_particles_in_air
alias: mass_fraction_of_water_in_ambient_aerosol_in_air
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles.
mass_fraction_of_water_in_pm10_ambient_aerosol_particles_in_air"Mass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers.
mass_fraction_of_water_in_pm2p5_ambient_aerosol_particles_in_airMass fraction is used in the construction "mass_fraction_of_X_in_Y", where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity and temperature at which the quantity described by the standard name applies, provide scalar coordinate variables with standard names of "relative_humidity" and "air_temperature". "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers.
mass_fraction_of_xylene_in_airMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer toaromatic_compounds as a group, as well as those for individual species.
medium_soil_pool_carbon_content"Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. "Soil carbon" is the organic matter present in soil quantified by the mass of carbon it contains. Soil carbon is returned to the atmosphere as the organic matter decays. The decay process takes varying amounts of time depending on the composition of the organic matter, the temperature and the availability of moisture. A carbon "soil pool" means the carbon contained in organic matter which has a characteristic period over which it decays and releases carbon into the atmosphere. "Medium soil pool" refers to the decay of organic matter in soil with a characteristic period of between ten and one hundred years under reference climate conditions of a temperature of 20 degrees Celsius and no water limitations.
medium_type_cloud_area_fractionMiddle type clouds are: Altostratus, Altocumulus, Nimbostratus. "X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". X_type_cloud_area_fraction is determined on the basis of cloud type and not on the vertical location of the cloud.
minimum_depth_of_aragonite_undersaturation_in_sea_waterDepth is the vertical distance below the surface. 'Undersaturation' means that a solution is unsaturated with respect to a solute. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate. The "minimum depth of undersaturation", sometimes called the "saturation horizon", is the shallowest depth at which a body of water is an undersaturated solution of a named solute.
minimum_depth_of_calcite_undersaturation_in_sea_waterDepth is the vertical distance below the surface. 'Undersaturation' means that a solution is unsaturated with respect to a solute. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate. The "minimum depth of undersaturation", sometimes called the "saturation horizon", is the shallowest depth at which a body of water is an undersaturated solution of a named solute.
minus_one_times_surface_upwelling_longwave_flux_in_air"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
minus_one_times_surface_upwelling_shortwave_flux_in_air"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
minus_one_times_toa_outgoing_shortwave_flux"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. Shortwave means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
minus_one_times_water_flux_into_sea_water_from_riversThe quantity minus_one_times_water_flux_into_sea_water_from_rivers is the quantity with standard name water_flux_into_sea_water_from_rivers multiplied by -1. "Water" means water in all phases. The water flux or volume transport into sea water from rivers is the inflow to the ocean, often applied to the surface in ocean models. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
miscellaneous_living_matter_carbon_content"Content" indicates a quantity per unit area. "Miscellaneous living matter" means all those parts of living vegetation that are not leaf, wood, root or other separately named components.
model_level_numberModel level number should be understood as equivalent to layer number.
model_level_number_at_base_of_ocean_mixed_layer_defined_by_sigma_thetaThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma, sigma_theta or vertical diffusivity is the level at which the quantity indicated differs from its surface value by a certain amount. The amount by which the quantity differs can be specified by a scalar coordinate variable. The quantity model_level_number_at_base_of_ocean_mixed_layer_defined_by_sigma_theta is sometimes referred to as the "bowl index".
model_level_number_at_convective_cloud_basecloud_base refers to the base of the lowest cloud. Model level number should be understood as equivalent to layer number. Convective cloud is that produced by the convection schemes in an atmosphere model.
model_level_number_at_convective_cloud_topcloud_top refers to the top of the highest cloud. Model level number should be understood as equivalent to layer number. Convective cloud is that produced by the convection schemes in an atmosphere model.
model_level_number_at_sea_floorThe quantity with standard name model_level_number_at_sea_floor is the depth of the ocean expressed in model levels. This could be a non-integer value because some ocean models use partial cells close to the sea floor. For example, if this field were 23.4 at some location, it would mean the water column at that point comprised 23 full model levels plus 40% occupancy of the lowest (24th) gridcell.
model_level_number_at_top_of_atmosphere_boundary_layerModel level number should be understood as equivalent to layer number.
moisture_content_of_soil_layer"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s).
moisture_content_of_soil_layer_at_field_capacity"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Quantities defined for a soil layer must have a vertical coordinate variable with boundaries indicating the extent of the layer(s). The field capacity of soil is the maximum content of water it can retain against gravitational drainage.
mole_concentration_of_acetic_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
mole_concentration_of_aceto_nitrile_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
mole_concentration_of_alpha_hexachlorocyclohexane_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
mole_concentration_of_alpha_pinene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
mole_concentration_of_ammonia_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ammonia is NH3.
mole_concentration_of_ammonium_in_sea_waterMole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.
mole_concentration_of_anthropogenic_nmvoc_expressed_as_carbon_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituentsof A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced,caused, or created by human activity.
mole_concentration_of_aragonite_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water_at_saturation'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Mole concentration at saturation means the mole concentration in a saturated solution.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
mole_concentration_of_atomic_bromine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic bromine is Br.
mole_concentration_of_atomic_chlorine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic chlorine is Cl.
mole_concentration_of_atomic_nitrogen_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for atomic nitrogen is N.
mole_concentration_of_bacteria_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_benzene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
mole_concentration_of_beta_pinene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
mole_concentration_of_biogenic_nmvoc_expressed_as_carbon_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes.
mole_concentration_of_bromine_chloride_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine chloride is BrCl.
mole_concentration_of_bromine_monoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine monoxide is BrO.
mole_concentration_of_bromine_nitrate_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for bromine nitrate is BrONO2.
mole_concentration_of_brox_expressed_as_bromine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with theexception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is theterm used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species including HCland ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard nameis calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_butane_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mole_concentration_of_calcareous_phytoplankton_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. 'Calcareous phytoplankton' are phytoplankton that produce calcite. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. Calcite is a mineral that is a polymorphof calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also existfor aragonite, another polymorph of calcium carbonate.
mole_concentration_of_calcite_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
mole_concentration_of_calcite_expressed_as_carbon_in_sea_water_at_saturation'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Mole concentration at saturation means the mole concentration in a saturated solution.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
mole_concentration_of_carbonate_expressed_as_carbon_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The chemical formula of the carbonate anion is CO3 with a charge of minus two.
mole_concentration_of_carbon_dioxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for carbon dioxide is CO2.
mole_concentration_of_carbon_monoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon monoxide is CO.
mole_concentration_of_carbon_tetrachloride_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of carbon tetrachloride is CCl4.
mole_concentration_of_cfc113a_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
mole_concentration_of_cfc113_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
mole_concentration_of_cfc114_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
mole_concentration_of_cfc115_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
mole_concentration_of_cfc11_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
mole_concentration_of_cfc12_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
mole_concentration_of_chlorine_dioxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine dioxide is OClO.
mole_concentration_of_chlorine_monoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine monoxide is ClO.
mole_concentration_of_chlorine_nitrate_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for chlorine nitrate is ClONO2.
mole_concentration_of_clox_expressed_as_chlorine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Clox"describes a family of chemical species consisting of inorganic chlorine compounds with theexception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are representedwithin a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, byusing a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasaltand other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculatedsolely with respect to the B contained in A, neglecting all other chemical constituents ofA.
mole_concentration_of_diatoms_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Diatoms are single-celled phytoplankton with an external skeleton made of silica.Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_diatoms_expressed_as_nitrogen_in_sea_water
alias: mole_concentration_of_diatoms_in_sea_water_expressed_as_nitrogen
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated in terms of B alone, neglecting all other chemical constituents of A.
mole_concentration_of_diazotrophs_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are autotrophic prokaryotic or eukaryotic organisms that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_dichlorine_peroxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dichlorine peroxide is Cl2O2.
mole_concentration_of_dimethyl_sulfide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
mole_concentration_of_dimethyl_sulfide_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
mole_concentration_of_dinitrogen_pentoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for dinitrogen pentoxide is N2O5.
mole_concentration_of_dissolved_inorganic_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the speciesrepresented, for example, by using a comment attribute.
mole_concentration_of_dissolved_iron_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mole_concentration_of_dissolved_molecular_oxygen_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mole_concentration_of_dissolved_molecular_oxygen_in_sea_water_at_shallowest_local_minimum_in_vertical_profile'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The concentration of any chemical species, whether particulate or dissolved, may vary with depth in the ocean. A depth profile may go through one or more local minima in concentration. The mole_concentration_of_molecular_oxygen_in_sea_water_at_shallowest_local_minimum_in_vertical_profile is the mole concentration of oxygen at the local minimum in the concentration profile that occurs closest to the sea surface.
mole_concentration_of_dissolved_organic_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where Xis a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Organic carbon describes a family of chemical species and is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a completedescription of the species represented, for example, by using a comment attribute.
mole_concentration_of_ethane_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes.There are standard names for the alkane group as well as for some of the individual species.
mole_concentration_of_ethanol_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethanol is C2H5OH.
mole_concentration_of_ethene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes.There are standard names for the alkene group as well as for some of the individual species.
mole_concentration_of_ethyne_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonlyknown as acetylene.
mole_concentration_of_formaldehyde_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
mole_concentration_of_formic_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
mole_concentration_of_gaseous_divalent_mercury_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s)in a salt or to other atom(s) in a molecule.
mole_concentration_of_gaseous_elemental_mercury_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for mercury is Hg.
mole_concentration_of_halon1202_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
mole_concentration_of_halon1211_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
mole_concentration_of_halon1301_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
mole_concentration_of_halon2402_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
mole_concentration_of_hcc140a_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
mole_concentration_of_hcfc141b_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
mole_concentration_of_hcfc142b_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
mole_concentration_of_hcfc22_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
mole_concentration_of_hexachlorobiphenyl_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings, each of which is additionally bonded to three chlorine atoms.
mole_concentration_of_hox_expressed_as_hydrogen_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_hydrogen_bromide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen bromide is HBr.
mole_concentration_of_hydrogen_chloride_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen chloride is HCl.
mole_concentration_of_hydrogen_cyanide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen cyanide is HCN.
mole_concentration_of_hydrogen_peroxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hydrogen peroxide is H2O2.
mole_concentration_of_hydroperoxyl_radical_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_concentration_of_hydroxyl_radical_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_concentration_of_hypobromous_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypobromous acid is HOBr.
mole_concentration_of_hypochlorous_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for hypochlorous acid is HOCl.
mole_concentration_of_inorganic_bromine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
mole_concentration_of_inorganic_chlorine_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the term used in standard names for all species belonging to the family that arerepresented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox"are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
mole_concentration_of_isoprene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
mole_concentration_of_limonene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl hydroperoxide is CH3OOH.
mole_concentration_of_mesozooplankton_expressed_as_carbon_in_sea_waterMole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where Xis a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Mesozooplankton are zooplankton ranging between 20 micrometers and 200 micrometers in size.
mole_concentration_of_mesozooplankton_expressed_as_nitrogen_in_sea_water
alias: mole_concentration_of_mesozooplankton_in_sea_water_expressed_as_nitrogen
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated in terms of B alone, neglecting all other chemical constituents of A.
mole_concentration_of_methane_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mole_concentration_of_methanol_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methanol is CH3OH.
mole_concentration_of_methyl_bromide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
mole_concentration_of_methyl_chloride_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
mole_concentration_of_methyl_hydroperoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl hydroperoxide is CH3OOH.
mole_concentration_of_methyl_peroxy_radical_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_concentration_of_microzooplankton_expressed_as_carbon_in_sea_waterMole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where Xis a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Microzooplankton are zooplankton of less than 20 micrometers in size.
mole_concentration_of_microzooplankton_expressed_as_nitrogen_in_sea_water
alias: mole_concentration_of_microzooplankton_in_sea_water_expressed_as_nitrogen
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated in terms of B alone, neglecting all other chemical constituents of A.
mole_concentration_of_miscellaneous_phytoplankton_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. 'Miscellaneous phytoplankton' are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other seperately named components of the phytoplankton population. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_miscellaneous_zooplankton_expressed_as_carbon_in_sea_waterMole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where Xis a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. 'Miscellaneous zooplankton' are all those zooplankton that are not mesozooplankton, microzooplankton or other seperately named components of the zooplankton population.
mole_concentration_of_molecular_hydrogen_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for molecular hydrogen is H2.
mole_concentration_of_nitrate_and_nitrite_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the nitrate anion is NO3-. The chemical formula for the nitrite anion is NO2-.
mole_concentration_of_nitrate_in_sea_waterMole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.
mole_concentration_of_nitrate_radical_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_concentration_of_nitric_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitric acid is HNO3.
mole_concentration_of_nitric_acid_trihydrate_ambient_aerosol_particles_in_air
alias: mole_concentration_of_nitric_acid_trihydrate_ambient_aerosol_in_air
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
mole_concentration_of_nitrite_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for the nitrite anion is NO2-.
mole_concentration_of_nitrogen_dioxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen dioxide is NO2.
mole_concentration_of_nitrogen_monoxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrogen monoxide is NO.
mole_concentration_of_nitrous_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous acid is HNO2.
mole_concentration_of_nitrous_oxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for nitrous oxide is N2O.
mole_concentration_of_nmvoc_expressed_as_carbon_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained inA, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mole_concentration_of_nox_expressed_as_nitrogen_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solelywith respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_noy_expressed_as_nitrogen_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name iscalculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_organic_detritus_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Organic detritus are particles of debris from decaying plants and animals.
mole_concentration_of_organic_detritus_expressed_as_nitrogen_in_sea_water
alias: mole_concentration_of_organic_detritus_in_sea_water_expressed_as_nitrogen
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Organic detritus are particles of debris from decaying plants and animals.
mole_concentration_of_organic_detritus_expressed_as_silicon_in_sea_water
alias: mole_concentration_of_organic_detritus_in_sea_water_expressed_as_silicon
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Organic detritus are particles of debris from decaying plants and animals.
mole_concentration_of_ozone_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for ozone is O3.
mole_concentration_of_particulate_matter_expressed_as_silicon_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_particulate_organic_matter_expressed_as_iron_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_particulate_organic_matter_expressed_as_nitrogen_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_particulate_organic_matter_expressed_as_phosphorus_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_peroxyacetyl_nitrate_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC namefor peroxyacetyl_nitrate is nitroethaneperoxoate.
mole_concentration_of_peroxynitric_acid_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
mole_concentration_of_phosphate_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mole_concentration_of_phytoplankton_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. Standard names also exist for the mole concentration of a number of components that make up the total phytoplankton population, such as diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton and miscellaneous phytoplankton.
mole_concentration_of_phytoplankton_expressed_as_iron_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_phytoplankton_expressed_as_nitrogen_in_sea_water
alias: mole_concentration_of_phytoplankton_in_sea_water_expressed_as_nitrogen
Mole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_concentration_of_phytoplankton_expressed_as_phosphorus_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_phytoplankton_expressed_as_silicon_in_sea_water'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_picophytoplankton_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis.
mole_concentration_of_propane_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mole_concentration_of_propene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
mole_concentration_of_radon_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical symbol for radon is Rn.
mole_concentration_of_silicate_in_sea_waterMole concentration means moles (amount of substance) per unit volume and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y.
mole_concentration_of_sulfur_dioxide_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for sulfur dioxide is SO2.
mole_concentration_of_toluene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one ofthe hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
mole_concentration_of_water_vapor_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.
mole_concentration_of_xylene_in_airMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
mole_concentration_of_zooplankton_expressed_as_carbon_in_sea_waterMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'.The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Standard names also exist for the mole concentration of a number of components that make up the total zooplankton population, such as mesozooplankton, microzooplankton andmiscellaneous zooplankton.
mole_content_of_ozone_in_atmosphere_layer"Content" indicates a quantity per unit area. The "content_of_X_in_atmosphere_layer" refers to the vertical integral between two specified levels in the atmosphere. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. For the mole content integrated from the surface to the top of the atmosphere, standard names including "atmosphere_mole_content_of_X" are used. The chemical formula for ozone is O3. "mole_content_of_ozone_in_atmosphere_layer" is usually measured in Dobson Units which are equivalent to 446.2 micromoles m-2. N.B. Data variables containing column content of ozone can be given the standard name of either equivalent_thickness_at_stp_of_atmosphere_ozone_content or atmosphere_mole_content_of_ozone. The latter name is recommended for consistency with mole content names for chemical species other than ozone.
mole_fraction_of_acetaldehyde_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The chemical formula for acetaldehyde is CH3CHO. The IUPAC name for acetaldehyde is ethanal.
mole_fraction_of_acetic_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
mole_fraction_of_acetone_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Acetone is an organic molecule with the chemical formula CH3CH3CO. The IUPAC name for acetone is propan-2-one. Acetone is a member of the group of organic compounds known as ketones. There are standard names for the ketone group as well as for some of the individual species.
mole_fraction_of_aceto_nitrile_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
mole_fraction_of_aldehydes_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Aldehydes are organic compounds with a CHO group; "aldehydes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for formaldehyde as the simplest member of the aldehydes group.
mole_fraction_of_alkanes_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Alkanes are saturated hydrocarbons, i.e. they do not contain any chemical double bonds. Alkanes contain only hydrogen and carbon combined in the general proportions C(n)H(2n+2); "alkanes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkane species, e.g., methane and ethane.
mole_fraction_of_alkenes_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Alkenes are unsaturated hydrocarbons as they contain chemical double bonds between adjacent carbon atoms. "Hydrocarbon" means a compound containing hydrogen and carbon. Alkenes contain only hydrogen and carbon combined in the general proportions C(n)H(2n); "alkenes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkene species, e.g., ethene and propene.
mole_fraction_of_alpha_hexachlorocyclohexane_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_alpha_pinene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
mole_fraction_of_ammonia_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for ammonia is NH3.
mole_fraction_of_anthropogenic_nmvoc_expressed_as_carbon_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity.
mole_fraction_of_artificial_tracer_with_fixed_lifetime_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Artificial tracer" means a passive atmospheric tracer that is used to study atmospheric transport and deposition. To specify the length of the tracer lifetime in the atmosphere, a scalar coordinate variable with the standard name of tracer_lifetime should be used.
mole_fraction_of_atomic_bromine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic bromine is Br.
mole_fraction_of_atomic_chlorine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic chlorine is Cl.
mole_fraction_of_atomic_nitrogen_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical symbol of atomic nitrogen is N.
mole_fraction_of_benzene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_beta_pinene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
mole_fraction_of_biogenic_nmvoc_expressed_as_carbon_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes.
mole_fraction_of_bromine_chloride_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine chloride is BrCl.
mole_fraction_of_bromine_monoxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine monoxide is BrO.
mole_fraction_of_bromine_nitrate_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of bromine nitrate is BrONO2.
mole_fraction_of_brox_expressed_as_bromine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Brox" describes a family of chemical species consisting of inorganic bromine compounds withthe exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" isthe term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species includingHCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_fraction_of_butane_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
mole_fraction_of_carbon_dioxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_carbon_monoxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_carbon_tetrachloride_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of carbon tetrachloride is CCl4.
mole_fraction_of_cfc113a_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
mole_fraction_of_cfc113_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
mole_fraction_of_cfc114_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
mole_fraction_of_cfc115_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
mole_fraction_of_cfc11_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC11 is CFCl3. The IUPAC name for CFC11 is trichloro-fluoro-methane.
mole_fraction_of_cfc12_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
mole_fraction_of_chlorine_dioxide_in_air
alias: mole_fraction_of_chlorine dioxide_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine dioxide is OClO.
mole_fraction_of_chlorine_monoxide_in_air
alias: mole_fraction_of_chlorine monoxide_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine monoxide is ClO.
mole_fraction_of_chlorine_nitrate_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of chlorine nitrate is ClONO2.
mole_fraction_of_clox_expressed_as_chlorine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Clox" describes a family of chemical species consisting of inorganic chlorine compounds withthe exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gasescontaining chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_fraction_of_dichlorine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Dichlorine is the molecular form of elemental chlorine with the chemical formula Cl2.
mole_fraction_of_dichlorine_peroxide_in_air
alias: mole_fraction_of_dichlorine peroxide_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of dichlorine peroxide is Cl2O2.
mole_fraction_of_dimethyl_sulfide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_dinitrogen_pentoxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of dinitrogen pentoxide is N2O5.
mole_fraction_of_ethane_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_ethanol_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for ethanol is C2H5OH.
mole_fraction_of_ethene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_ethyne_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_formaldehyde_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_formic_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
mole_fraction_of_gaseous_divalent_mercury_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
mole_fraction_of_gaseous_elemental_mercury_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_glyoxal_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The chemical formula for glyoxal is CHOCHO. The IUPAC name for glyoxal is ethanedial.
mole_fraction_of_halon1202_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1202 is CBr2F2. The IUPAC name for halon 1202 is dibromo-difluoro-methane.
mole_fraction_of_halon1211_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1211 is CBrClF2. The IUPAC name for halon 1211 is bromo-chloro-difluoro-methane.
mole_fraction_of_halon1301_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon1301 is CBrF3. The IUPAC name for halon 1301 is bromo-trifluoro-methane.
mole_fraction_of_halon2402_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of halon2402 is C2Br2F4. The IUPAC name for halon 2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
mole_fraction_of_hcc140a_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
mole_fraction_of_hcfc141b_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
mole_fraction_of_hcfc142b_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
mole_fraction_of_hcfc22_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
mole_fraction_of_hexachlorobiphenyl_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_hox_expressed_as_hydrogen_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_fraction_of_hydrogen_bromide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen bromide is HBr.
mole_fraction_of_hydrogen_chloride_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen chloride is HCl.
mole_fraction_of_hydrogen_cyanide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen cyanide is HCN.
mole_fraction_of_hydrogen_peroxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydrogen peroxide is H202.
mole_fraction_of_hydrogen_sulfide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of hydrogen sulfide is H2S.
mole_fraction_of_hydroperoxyl_radical_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hydroperoxyl radical is HO2.
mole_fraction_of_hydroxyl_radical_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_hypobromous_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hypobromous acid is HOBr.
mole_fraction_of_hypochlorous_acid_in_air
alias: mole_fraction_of_hypochlorous acid_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of hypochlorous acid is HOCl.
mole_fraction_of_inorganic_bromine_in_air
alias: mole_fraction_of_total_inorganic_bromine_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of bromine containing source gases (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
mole_fraction_of_inorganic_chlorine_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. "Inorganic chlorine",sometimes referred to as Cly, describes a family of chemical species which result from the degradation of chlorine-containing source gases (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as sea-salt and other aerosols. mole_fraction_of_inorganic_chlorine is the sum of all species belonging to the family that are represented within a given model.
mole_fraction_of_isoprene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_limonene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There arestandard names for the terpene group as well as for some of the individual species.
mole_fraction_of_methane_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_methanol_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for methanol is CH3OH.
mole_fraction_of_methlyglyoxal_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Methylglyoxal is an organic molecule with the chemical formula CH3COCHO. It is also called pyruvaldehyde or 2-oxopropanal.
mole_fraction_of_methyl_bromide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl bromide is CH3Br.
mole_fraction_of_methyl_chloride_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl chloride is CH3Cl.
mole_fraction_of_methyl_hydroperoxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of methyl hydroperoxide is CH3OOH.
mole_fraction_of_methyl_peroxy_radical_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_fraction_of_molecular_hydrogen_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of molecular hydrogen is H2.
mole_fraction_of_nitrate_radical_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
mole_fraction_of_nitric_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_nitric_acid_trihydrate_ambient_aerosol_particles_in_air
alias: mole_fraction_of_nitric_acid_trihydrate_ambient_aerosol_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
mole_fraction_of_nitrogen_dioxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_nitrogen_monoxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_nitrous_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for nitrous acid is HNO2.
mole_fraction_of_nitrous_oxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of nitrous oxide is N2O.
mole_fraction_of_nmvoc_expressed_as_carbon_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mole_fraction_of_nox_expressed_as_nitrogen_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_fraction_of_noy_expressed_as_nitrogen_in_air
alias: mole_fraction_of_total_reactive_nitrogen_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, whereB is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
mole_fraction_of_organic_nitrates_in_airMole fraction is used in the construction "mole_fraction_of_X_in_Y", where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". Organic nitrates are nitrogen-containing compounds having the general formula RONO2, where R is an alkyl (or organic) group; "organic_nitrates" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
mole_fraction_of_ozone_in_air
alias: mole_fraction_of_o3_in_air
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_peroxyacetyl_nitrate_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_peroxynitric_acid_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of peroxynitric acid is HNO4.
mole_fraction_of_propane_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_propene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_radon_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalsymbol for radon is Rn.
mole_fraction_of_sulfur_dioxide_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_toluene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_fraction_of_water_vapor_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of water vapor is H2O.
mole_fraction_of_xylene_in_airMole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y.
mole_ratio_of_nitrate_to_phosphate_in_sea_waterMole ratio is used in the construction mole_ratio_of_X_to_Y_in_medium, where X and Y are both material constituents of the medium. "Medium" can take anyof the values given in the "Small scale medium" section of the standard name Guidelines document. "ratio_of_X_to_Y" means X/Y. The chemical formula for the nitrate anion is NO3-. The chemical formula of the phosphate anion is PO4 with a charge of minus three.
moles_of_cfc11_per_unit_mass_in_sea_water
alias: moles_per_unit_mass_of_cfc11_in_sea_water
moles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
moles_of_nitrate_and_nitrite_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
moles_of_nitrate_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
moles_of_nitrite_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
moles_of_oxygen_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
moles_of_phosphate_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
moles_of_silicate_per_unit_mass_in_sea_watermoles_of_X_per_unit_mass_inY is also called "molality" of X in Y, where X is a material constituent of Y.
net_downward_longwave_flux_in_air"longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_downward_longwave_flux_in_air_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_downward_radiative_flux_at_top_of_atmosphere_modelFluxes at the top_of_atmosphere_model differ from TOA fluxes only if the model TOA fluxes make some allowance for the atmosphere above the top of the model; if not, it is usual to give standard names with toa to the fluxes at the top of the model atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_downward_shortwave_flux_at_sea_water_surface"Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation.
net_downward_shortwave_flux_in_air"shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_downward_shortwave_flux_in_air_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_calcareous_phytoplankton
alias: net_primary_mole_productivity_of_carbon_by_calcareous_phytoplankton
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "Calcareous phytoplankton" are phytoplankton that produce calcite. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_diatoms
alias: net_primary_mole_productivity_of_carbon_by_diatoms
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_diazotrophs
alias: net_primary_mole_productivity_of_carbon_by_diazotrophs
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_miscellaneous_phytoplankton
alias: net_primary_mole_productivity_of_carbon_by_miscellaneous_phytoplankton
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. "Miscellaneous phytoplankton" are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other seperately named components of the phytoplankton population. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_phytoplankton
alias: net_primary_mole_productivity_of_carbon_by_phytoplankton
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_by_picophytoplankton
alias: net_primary_mole_productivity_of_carbon_by_picophytoplankton
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_mole_productivity_of_biomass_expressed_as_carbon_due_to_nitrate_utilization
alias: net_primary_mole_productivity_of_carbon_due_to_nitrate_utilization
"Production of carbon" refers to the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. "Nitrate utilization" means net primary production by phytoplankton based on nitrate alone. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. The chemical formula for the nitrate anion is NO3-. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_production_of_biomass_expressed_as_carbon_per_unit_volume_in_sea_waterNet primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constiuents of A.
net_primary_productivity_of_biomass_expressed_as_carbon
alias: net_primary_productivity_of_carbon
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_productivity_of_biomass_expressed_as_carbon_accumulated_in_leaves
alias: net_primary_productivity_of_carbon_accumulated_in_leaves
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_productivity_of_biomass_expressed_as_carbon_accumulated_in_roots
alias: net_primary_productivity_of_carbon_accumulated_in_roots
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_primary_productivity_of_biomass_expressed_as_carbon_accumulated_in_wood
alias: net_primary_productivity_of_carbon_accumulated_in_wood
"Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. "Productivity" means production per unit area. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
net_rate_of_absorption_of_longwave_energy_in_atmosphere_layer"longwave" means longwave radiation. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Net absorbed radiation is the difference between absorbed and emitted radiation.
net_rate_of_absorption_of_shortwave_energy_in_atmosphere_layer"shortwave" means shortwave radiation. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Net absorbed radiation is the difference between absorbed and emitted radiation.
net_upward_longwave_flux_in_air"longwave" means longwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_upward_longwave_flux_in_air_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_upward_shortwave_flux_in_air"shortwave" means shortwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
net_upward_shortwave_flux_in_air_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
normalized_difference_vegetation_index"Normalized_difference_vegetation_index", usually abbreviated to NDVI, is an index calculated from reflectances measured in the visible and near infrared channels. It is calculated as NDVI = (NIR - R) / (NIR + R) where NIR is the reflectance in the near-infrared band and R is the reflectance in the red visible band. Reflectance is the ratio of the reflected over the incoming radiation in each spectral band. The calculated value of NDVI depends on the precise definitions of the spectral bands and these definitions may vary between different models and remote sensing instruments.
northward_atmosphere_dry_static_energy_transport_across_unit_distance"Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
northward_atmosphere_heat_transport"Northward" indicates a vector component which is positive when directed northward (negative southward). "Atmosphere heat transport" means total heat transport by the atmosphere by all processes.
northward_atmosphere_water_transport_across_unit_distance"Water" means water in all phases. "Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
northward_atmosphere_water_vapor_transport_across_unit_distance"Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
northward_derivative_of_eastward_sea_ice_velocityA velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Northward" indicates a vector component which is positive when directed northward (negative southward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component. "component_derivative_of_X" means derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, in the case where they are not true longitude and latitude. The named quantity is a component of the strain rate tensor for sea ice.
northward_eliassen_palm_flux_in_air
alias: northward_eliassen_palm_flux
"Eliassen Palm flux" is a widely used vector in the meridional plane, and the divergence of this flux appears as a forcing in the Transformed Eulerian mean formulation of the zonal mean zonal wind equation. "Northward" indicates a vector component which is positive when directed northward (negative southward).
northward_heat_flux_in_air_due_to_eddy_advection
alias: northward_heat_flux_due_to_eddy_advection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
northward_mass_flux_of_air"Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
northward_momentum_flux_correction"Northward" indicates a vector component which is positive when directed northward (negative southward). Momentum flux is dimensionally equivalent to stress and pressure. It is a tensor quantity. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
northward_ocean_freshwater_transport"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.
northward_ocean_freshwater_transport_due_to_bolus_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.
northward_ocean_freshwater_transport_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.
northward_ocean_freshwater_transport_due_to_gyreThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_ocean_freshwater_transport_due_to_overturningThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_ocean_heat_transport"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.
northward_ocean_heat_transport_due_to_bolus_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.
northward_ocean_heat_transport_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.
northward_ocean_heat_transport_due_to_gyreThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_ocean_heat_transport_due_to_overturningThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_ocean_salt_transport"Northward" indicates a vector component which is positive when directed northward (negative southward). Ocean transport means transport by all processes, both sea water and sea ice.
northward_ocean_salt_transport_due_to_bolus_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.
northward_ocean_salt_transport_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by diffusion means the part due to horizontal or isopyncal diffusion schemes in an ocean model, but not including the "bolus" or Gent-McWilliams velocity.
northward_ocean_salt_transport_due_to_gyreThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by the ocean gyre is geometrically defined as being the part due to the vertical integral of the product of deviations of velocity and tracer from their zonal means. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_ocean_salt_transport_due_to_overturningThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Northward" indicates a vector component which is positive when directed northward (negative southward). Northward transport by (meridional) overturning is geometrically defined as being the part due to the vertical integral of the product of zonal means of velocity and tracer. The velocity does not include "bolus" or Gent-McWilliams velocity.
northward_sea_ice_displacement"Northward" indicates a vector component which is positive when directed northward (negative southward). "Displacement" means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component. A northward displacement is the distance calculated from the change in a moving object's latitude between the start and end of the time interval associated with the displacement variable.
northward_sea_ice_velocityA velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). Sea ice velocity is defined as a two-dimensional vector, with no vertical component.
northward_sea_water_velocityA velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).
northward_sea_water_velocity_assuming_no_tideA velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition.
northward_transformed_eulerian_mean_air_velocity
alias: northward_transformed_eulerian_mean_velocity
"Northward" indicates a vector component which is positive when directed northward (negative southward).
northward_water_vapor_flux_in_air
alias: northward_water_vapor_flux
"Northward" indicates a vector component which is positive when directed northward (negative southward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
northward_water_vapor_transport_across_unit_distance_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Northward" indicates a vector component which is positive when directed northward (negative southward). Transport across_unit_distance means expressed per unit distance normal to the direction of transport.
northward_wind"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
northward_wind_shear"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Wind shear is the derivative of wind with respect to height.
number_concentration_of_aerosol_particles_at_stp_in_air"Number concentration" means the number of particles or other specified objects per unit volume. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "stp" means standard temperature (0 degC) and pressure (101325 Pa). The surface called "surface" means the lower boundary of the atmosphere.
number_concentration_of_ambient_aerosol_particles_in_air
alias: number_concentration_of_ambient_aerosol_in_air
"Number concentration" means the number of particles or other specified objects per unit volume. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles.
number_concentration_of_cloud_condensation_nuclei_at_stp_in_airThe cloud condensation nuclei number concentration is the total number of aerosol particles per unit volume independent of and integrated over particle size that act as condensation nuclei for liquid-phase clouds. A coordinate variable with the standard name of relative_humidity should be specified to indicate that the property refers to a specific supersaturation with respect to liquid water. The ability of a particle to act as a condensation nucleus is determined by its size, chemical composition, and morphology. "stp" means standard temperature (0 degC) and pressure (101325 Pa).
number_concentration_of_cloud_liquid_water_particles_in_air"Number concentration" means the number of particles or other specified objects per unit volume.
number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top"Number concentration" means the number of particles or other specified objects per unit volume. cloud_top refers to the top of the highest cloud.
number_concentration_of_coarse_mode_ambient_aerosol_particles_in_air
alias: number_concentration_of_coarse_mode_ambient_aerosol_in_air
"Number concentration" means the number of particles or other specified objects per unit volume. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. Coarse mode aerosol particles have a diameter of more than 1 micrometer.
number_concentration_of_ice_crystals_in_air"Number concentration" means the number of particles or other specified objects per unit volume.
number_concentration_of_ice_crystals_in_air_at_ice_cloud_top"Number concentration" means the number of particles or other specified objects per unit volume. cloud_top refers to the top of the highest cloud.
number_concentration_of_nucleation_mode_ambient_aerosol_particles_in_air
alias: number_concentration_of_nucleation_mode_ambient_aerosol_in_air
"Number concentration" means the number of particles or other specified objects per unit volume. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. Nucleation mode aerosol particles have a diameter of less than 3 nanometers.
number_concentration_of_pm10_aerosol_particles_in_air"Number concentration" means the number of particles or other specified objects per unit volume. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature".
number_concentration_of_pm2p5_aerosol_particles_in_air"Number concentration" means the number of particles or other specified objects per unit volume. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. To specify the relative humidity and temperature at which the particle size applies, provide scalar coordinate variables with the standard names of, respectively, "relative_humidity" and "air_temperature".
number_of_days_with_air_temperature_above_thresholdAir temperature is the bulk temperature of the air, not the surface (skin) temperature. A variable whose standard name has the form number_of_days_with_X_below|above_threshold is a count of the number of days on which the condition X_below|above_threshold is satisfied. It must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_methods entry for within days which describes the processing of quantity X before the threshold is applied. A number_of_days is an extensive quantity in time, and the cell_methods entry for over days should be "sum".
number_of_days_with_air_temperature_below_thresholdAir temperature is the bulk temperature of the air, not the surface (skin) temperature. A variable whose standard name has the form number_of_days_with_X_below|above_threshold is a count of the number of days on which the condition X_below|above_threshold is satisfied. It must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_methods entry for within days which describes the processing of quantity X before the threshold is applied. A number_of_days is an extensive quantity in time, and the cell_methods entry for over days should be "sum".
number_of_days_with_lwe_thickness_of_precipitation_amount_above_threshold"Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "lwe" means liquid water equivalent. A variable whose standard name has the form number_of_days_with_X_below|above_threshold is a count of the number of days on which the condition X_below|above_threshold is satisfied. It must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_methods entry for within days which describes the processing of quantity X before the threshold is applied. A number_of_days is an extensive quantity in time, and the cell_methods entry for over days should be "sum".
number_of_days_with_wind_speed_above_thresholdWind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity. A variable whose standard name has the form number_of_days_with_X_below|above_threshold is a count of the number of days on which the condition X_below|above_threshold is satisfied. It must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_methods entry for within days which describes the processing of quantity X before the threshold is applied. A number_of_days is an extensive quantity in time, and the cell_methods entry for over days should be "sum".
number_of_icebergs_per_unit_area
No help available.
ocean_barotropic_mass_streamfunctionThe barotropic stream function with the dimensions of volume transport has the standard name ocean_barotropic_streamfunction.
ocean_barotropic_streamfunction
No help available.
ocean_heat_x_transport"x" indicates a vector component along the grid x-axis, positive with increasing x.
ocean_heat_x_transport_due_to_bolus_advection"x" indicates a vector component along the grid x-axis, positive with increasing x. Transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_heat_x_transport_due_to_diffusion"x" indicates a vector component along the grid x-axis, positive with increasing x. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_heat_y_transport"y" indicates a vector component along the grid y-axis, positive with increasing y.
ocean_heat_y_transport_due_to_bolus_advection"y" indicates a vector component along the grid y-axis, positive with increasing y. Transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_heat_y_transport_due_to_diffusion"y" indicates a vector component along the grid y-axis, positive with increasing y. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_integral_of_sea_water_temperature_wrt_depth"integral_of_Y_wrt_X" means int Y dX. The data variable should have an axis for X specifying the limits of the integral as bounds. "wrt" means with respect to. Depth is the vertical distance below the surface. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
ocean_isopycnal_layer_thickness_diffusivity
No help available.
ocean_kinetic_energy_dissipation_per_unit_area_due_to_vertical_frictionFriction, leading to the dissipation of kinetic energy, arises in ocean models as a result of the viscosity of sea water. Generally, the lateral (xy) viscosity is given a large value to maintain the numerical stability of the model. In contrast, the vertical viscosity is usually much smaller. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_kinetic_energy_dissipation_per_unit_area_due_to_xy_frictionFriction, leading to the dissipation of kinetic energy, arises in ocean models as a result of the viscosity of sea water. Generally, the lateral (xy) viscosity is given a large value to maintain the numerical stability of the model. In contrast, the vertical viscosity is usually much smaller. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_mass_content_of_dissolved_inorganic_carbon"Content" indicates a quantity per unit area. "Dissolvedinorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
ocean_mass_x_transport"x" indicates a vector component along the grid x-axis, positive with increasing x.
ocean_mass_x_transport_due_to_advection"x" indicates a vector component along the grid x-axis, positive with increasing x. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_mass_x_transport_due_to_advection_and_bolus_advection"x" indicates a vector component along the grid x-axis, positive with increasing x. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.
ocean_mass_y_transport"y" indicates a vector component along the grid y-axis, positive with increasing y.
ocean_mass_y_transport_due_to_advection"y" indicates a vector component along the grid y-axis, positive with increasing y. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_mass_y_transport_due_to_advection_and_bolus_advection"y" indicates a vector component along the grid y-axis, positive with increasing y. Transport by bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_meridional_overturning_mass_streamfunctionIn contrast to the quantity with standard name ocean_meridional_overturning_streamfunction, this quantity includes all physical processes, resolved or parameterized, that impact mass/volume transport. Thus it includes contributions from the bolus and Gent-McWilliams velocity.
ocean_meridional_overturning_mass_streamfunction_due_to_bolus_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_meridional_overturning_streamfunctionThe ocean meridional overturning streamfunction should not include not include "bolus" or Gent-McWilliams velocity.
ocean_mixed_layer_thicknessThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. Various criteria are used to define the mixed layer; this can be specified by using a standard name of ocean_mixed_layer_defined_byX.
ocean_mixed_layer_thickness_defined_by_mixing_schemeThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by the mixing scheme is a diagnostic of ocean models.
ocean_mixed_layer_thickness_defined_by_sigma_tThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.
ocean_mixed_layer_thickness_defined_by_sigma_thetaThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.
ocean_mixed_layer_thickness_defined_by_temperatureThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma or sigma_theta is the level at which the quantity indicated differs from its surface value by a certain amount.
ocean_mixed_layer_thickness_defined_by_vertical_tracer_diffusivityThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma, sigma_theta, or vertical diffusivity is the level at which the quantity indicated differs from its surface value by a certain amount. The amount by which the quantity differs can be specified by a scalar coordinate variable.
ocean_momentum_xy_biharmonic_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "xy diffusivity" means the lateral along_coordinate component of diffusivity due to motion which is not resolved on the grid scale of the model. xy diffusivities are used in some ocean models to counteract the numerical instabilities inherent in certain implementations of rotated neutral diffusion. "biharmonic diffusivity" means diffusivity for use with a biharmonic diffusion operator.
ocean_momentum_xy_laplacian_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "xy diffusivity" means the lateral along_coordinate component of diffusivity due to motion which is not resolved on the grid scale of the model. xy diffusivities are used in some ocean models to counteract the numerical instabilities inherent in certain implementations of rotated neutral diffusion. "laplacian diffusivity" means diffusivity for use with a Laplacian diffusion operator.
ocean_montgomery_potentialMongomery potential is defined as M = ap + gz, where a = specific volume, p = pressure, g = gravity, and z=depth. It represents an exact streamfunction on specificvolume anomaly surfaces.
ocean_rigid_lid_pressure"Ocean rigid lid pressure" means the pressure at the surface of an ocean model assuming that it is bounded above by a rigid lid.
ocean_rigid_lid_pressure_expressed_as_sea_surface_height_above_geoid"Ocean rigid lid pressure" means the pressure at the surface of an ocean model assuming that it is bounded above by a rigid lid.
ocean_salt_x_transport"x" indicates a vector component along the grid x-axis, positive with increasing x. Salt transport refers to the mass of salt being transported.
ocean_salt_y_transport"y" indicates a vector component along the grid y-axis, positive with increasing y. Salt transport refers to the mass of salt being transported.
ocean_s_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates.
ocean_s_coordinate_g1See Appendix D of the CF convention for information about dimensionless vertical coordinates.
ocean_s_coordinate_g2See Appendix D of the CF convention for information about dimensionless vertical coordinates.
ocean_sigma_coordinateSee Appendix D of the CF convention for information about dimensionless vertical coordinates. Note that the ocean sigma coordinate is not the same quantity as sea water sigma (excess of density over 1000 kg m-3), for which there are various other standard names.
ocean_tracer_bolus_biharmonic_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "Bolus diffusivity" means a lateral diffusivity. "biharmonicdiffusivity" means diffusivity for use with a biharmonic diffusion operator.
ocean_tracer_bolus_laplacian_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "Bolus diffusivity" means a lateral diffusivity. "laplacian diffusivity" means diffusivity for use with a Laplacian diffusion operator.
ocean_tracer_epineutral_biharmonic_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "epineutral diffusivity" means a lateral diffusivity along a either a neutral or isopycnal density surface due to motion which is not resolved on the grid scale of an ocean model. The type of density surface is dependent on the model formulation. "biharmonic diffusivity" means diffusivity for use with a biharmonic diffusion operator.
ocean_tracer_epineutral_laplacian_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "epineutral diffusivity" means a lateral diffusivity along a either a neutral or isopycnal density surface due to motion which is not resolved on the grid scale of an ocean model. The type of density surface is dependent on the model formulation. "laplacian diffusivity" means diffusivity for use with a Laplacian diffusion operator.
ocean_tracer_xy_biharmonic_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "xy diffusivity" means the lateral along_coordinate component of diffusivity due to motion which is not resolved on the grid scale of the model. xy diffusivities are used in some ocean models to counteract the numerical instabilities inherent in certain implementations of rotated neutral diffusion. "biharmonic diffusivity" means diffusivity for use with a biharmonic diffusion operator.
ocean_tracer_xy_laplacian_diffusivityDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. "xy diffusivity" means the lateral along_coordinate component of diffusivity due to motion which is not resolved on the grid scale of the model. xy diffusivities are used in some ocean models to counteract the numerical instabilities inherent in certain implementations of rotated neutral diffusion. "laplacian diffusivity" means diffusivity for use with a Laplacian diffusion operator.
ocean_vertical_diffusivity"Vertical diffusivity" means the vertical component of diffusivity due to motion which is not resolved on the grid scale of the model.
ocean_vertical_heat_diffusivity"Vertical heat diffusivity" means the vertical component of the diffusivity of heat due to motion which is not resolved on the grid scale of the model.
ocean_vertical_momentum_diffusivity"Vertical momentum diffusivity" means the vertical component of the diffusivity of momentum due to motion which is not resolved on the grid scale of the model.
ocean_vertical_momentum_diffusivity_due_to_backgroundDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. The construction vertical_X_diffusivity means the vertical component of thediffusivity of X due to motion which is not resolved on the grid scale of the model. "Due to background" means caused by a time invariant imposed field which may be eitherconstant over the globe or spatially varying, depending on the ocean model used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_vertical_momentum_diffusivity_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Vertical momentum diffusivity" means the vertical component of the diffusivity of momentum due to motion which is not resolved on the grid scale of the model. Convective mixing in the ocean is somtimes modelled as an enhanced diffusivity.
ocean_vertical_momentum_diffusivity_due_to_form_dragDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. The construction vertical_X_diffusivity means the vertical component of thediffusivity of X due to motion which is not resolved on the grid scale of the model. "Due to form drag" refers to a vertical diffusivity resulting from a model scheme representing mesoscale eddy-induced form drag. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_vertical_momentum_diffusivity_due_to_tidesDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. The construction vertical_X_diffusivity means the vertical component of thediffusivity of X due to motion which is not resolved on the grid scale of the model. "Due to tides" means due to all astronomical gravity changes which manifest as tides.No distinction is made between different tidal components. The specification of a physicalprocess by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_vertical_salt_diffusivity"Vertical salt diffusivity" means the vertical component of the diffusivity of salt due to motion which is not resolved on the grid scale of the model.
ocean_vertical_tracer_diffusivity"Vertical tracer diffusivity" means the vertical component of the diffusivity of tracers, i.e. heat and salinity, due to motion which is not resolved on the grid scale of the model.
ocean_vertical_tracer_diffusivity_due_to_backgroundDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. The construction vertical_X_diffusivity means the vertical component of thediffusivity of X due to motion which is not resolved on the grid scale of the model. "Due to background" means caused by a time invariant imposed field which may be eitherconstant over the globe or spatially varying, depending on the ocean model used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_vertical_tracer_diffusivity_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Vertical tracer diffusivity" means the vertical component of the diffusivity of tracers, i.e. heat and salinity, due to motion which is not resolved on the grid scale of the model. Convective mixing in the ocean is sometimes modelled as an enhanced diffusivity.
ocean_vertical_tracer_diffusivity_due_to_tidesDiffusivity is also sometimes known as the coefficient of diffusion. Diffusion occurs as a result of a gradient in the spatial distribution of mass concentration, temperature or momentum. The diffusivity may be very different in the vertical and horizontal directions. The construction vertical_X_diffusivity means the vertical component of thediffusivity of X due to motion which is not resolved on the grid scale of the model. "Due to tides" means due to all astronomical gravity changes which manifest as tides.No distinction is made between different tidal components. The specification of a physicalprocess by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
ocean_vertical_tracer_diffusivity_due_to_wind_mixingThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Vertical tracer diffusivity" means the vertical component of the diffusivity of tracers, i.e. heat and salinity, due to motion which is not resolved on the grid scale of the model.
ocean_volume
No help available.
ocean_volume_fraction"X_volume_fraction" means the fraction of volume occupied by X.
ocean_volume_transport_across_lineTransport "across_line" means that which crosses a particular line on the Earth's surface; formally this means the integral along the line of the normal component of the transport.
ocean_volume_x_transport"x" indicates a vector component along the grid x-axis, positive with increasing x.
ocean_volume_y_transport"y" indicates a vector component along the grid y-axis, positive with increasing y.
ocean_y_overturning_mass_streamfunction"y" indicates a vector component along the grid y-axis, positive with increasing y. In contrast to the quantity with standard name ocean_meridional_overturning_streamfunction, this quantity includes all physical processes, resolved or parameterized, that impact mass/volume transport. Thus it includes contributions from the bolus and Gent-McWilliams velocity.
ocean_y_overturning_mass_streamfunction_due_to_bolus_advection"y" indicates a vector component along the grid y-axis, positive with increasing y. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
omnidirectional_photosynthetic_spherical_irradiance_in_sea_water"Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Omnidirectional spherical irradiance is the radiation incident on unit area of a spherical (or "4-pi") collector. It is sometimes called "scalar irradiance". Radiation incident on a 2-pi collector has standard names of "spherical irradiance" which specify up/downwelling.
omnidirectional_spherical_irradiance_per_unit_wavelength_in_sea_water
alias: omnidirectional_spectral_spherical_irradiance_in_sea_water
Omnidirectional spherical irradiance is the radiation incident on unit area of a spherical (or "4-pi") collector. It is sometimes called "scalar irradiance". Radiation incident on a 2-pi collector has standard names of "spherical irradiance" which specify up/downwelling. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
optical_thickness_of_atmosphere_layer_due_to_ambient_aerosol_particles
alias: optical_thickness_of_atmosphere_layer_due_to_ambient_aerosol
alias: optical_thickness_of_atmosphere_layer_due_to_aerosol
The optical thickness is the integral along the path of radiation of a volume scattering/absorption/attenuation coefficient. The radiative flux is reduced by a factor exp(-optical_thickness) on traversing the path. A coordinate variable of radiation_wavelength or radiation_frequency can be specified to indicate that the optical thickness applies at specific wavelengths or frequencies. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
original_air_pressure_of_lifted_parcelVarious stability and convective potential indices are calculated by "lifting" a parcel of air: moving it dry adiabatically from a starting height (often the surface) to the Lifting Condensation Level, and then wet adiabatically from there to an ending height (often the top of the data/model/atmosphere). original_air_pressure_of_lifted_parcel and final_air_pressure_of_lifted_parcel are the pressure heights at the start and end of lifting, respectively.
permafrost_layer_thicknessPermafrost is soil or rock that has remained at a temperature at or below zero degrees Celsius throughout the seasonal cycle for two or more years. "Thickness" means the vertical extent of a layer.
phase_of_global_average_sea_level_changeGlobal average sea level change is due to change in volume of the water in the ocean, caused by mass and/or density change, or to change in the volume of the ocean basins, caused by tectonics etc. It is sometimes called "eustatic", which is a term that also has other definitions. It differs from the change in the global average sea surface height relative to the centre of the Earth by the global average vertical movement of the ocean floor. Zero sea level change is an arbitrary level. Phase is the initial angle of a wave modelled by a sinusoidal function. A coordinate variable of harmonic_period should be used to specify the period of the sinusoidal wave.
photolysis_rate_of_nitrogen_dioxide"Photolysis" is a chemical reaction in which a chemical compound is broken down by photons. The "reaction rate" is the rate at which the reactants of a chemical reaction form the products. The chemical formula for nitrogen dioxide is NO2.
photolysis_rate_of_ozone_to_1D_oxygen_atom"Photolysis" is a chemical reaction in which a chemical compound is broken down by photons. The "reaction rate" is the rate at which the reactants of a chemical reaction form the products. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen. "1D oxygen atom" means the singlet D state, an excited state, of the oxygen atom.
planetary_albedo
No help available.
plant_respiration_carbon_flux"Respiration carbon" refers to the rate at which biomass is respired expressed as the mass of carbon which it contains. Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e. "producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
platform_azimuth_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. Platform azimuth angle is the horizontal angle between the line of sight from the observation point to the platform and a reference direction at the observation point, which is often due north. The angle is measured clockwise positive, starting from the reference direction. A comment attribute should be added to a data variable with the standard name platform_azimuth_angle to specify the reference direction. A standard name also exists for sensor_azimuth_angle. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated azimuth angle.
platform_courseStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. The platform course is the direction in which the platform is travelling (not necessarily the same as the direction in which it is pointing, called platform_orientation).
platform_id
alias: station_wmo_id
A variable with the standard name of platform_id contains strings which help to identify the platform from which an observation was made. For example, this may be a WMO station identification number.
platform_name
alias: station_description
A variable with the standard name of platform_name contains strings which help to identify the platform from which an observation was made. For example, this may be a geographical place name such as "South Pole" or the name of a meteorological observing station.
platform_orientationStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. The platform orientation is the direction in which the "front" or longitudinal axis of the platform is pointing (not necessarily the same as the direction in which it is travelling, called platform_course).
platform_pitch_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_pitch_rateStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_roll_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_roll_rateStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_speed_wrt_air"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. The platform speed with respect to air is often called the "air speed" of the platform.
platform_speed_wrt_ground"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. The platform speed with respect to ground is relative to the solid Earth beneath it, i.e. the sea floor for a ship. It is often called the "ground speed" of the platform.
platform_speed_wrt_sea_water"wrt" means with respect to. Speed is the magnitude of velocity. Standard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_view_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. Platform view angle is the angle between the line of sight from the platform and the direction straight vertically down. Zero view angle means looking directly beneath the platform. There is no standardized sign convention for platform_view_angle. A standard name also exists for sensor_view_angle. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated view angle.
platform_yaw_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_yaw_rateStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite.
platform_zenith_angleStandard names for "platform" describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. Platform zenith angle is the the angle between the line of sight to the platform and the local zenith at the observation target. This angle is measured starting from directly overhead and its range is from zero (directly overhead the observation target) to 180 degrees (directly below the observation target). Local zenith is a line perpendicular to the Earth's surface at a given location. "Observation target" means a location on the Earth defined by the sensor performing the observations. A standard name also exists for sensor_zenith_angle. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated zenith angle.
potential_energy_content_of_atmosphere_layer"Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
potential_vorticity_of_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Atmosphere potential vorticity is the vertically averaged absolute vorticity of a layer of the atmosphere divided by the pressure difference from the bottom to the top of the layer.
potential_vorticity_of_ocean_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Ocean potential vorticity is the vertically averaged absolute vorticity of a layer of the ocean divided by the thickness of the layer.
precipitation_amount"Amount" means mass per unit area.
precipitation_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
precipitation_flux_onto_canopy
alias: precipitation_flux_onto_canopy_where_land
"Canopy" means the plant or vegetation canopy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
product_of_air_temperature_and_omega"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_air_temperature_and_specific_humidity"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. Specific humidity is the mass fraction of water vapor in (moist) air.
product_of_eastward_sea_water_velocity_and_salinity"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
product_of_eastward_sea_water_velocity_and_temperature"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
product_of_eastward_wind_and_air_temperature"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_eastward_wind_and_geopotential_height"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_eastward_wind_and_northward_wind"product_of_X_and_Y" means X*Y. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_eastward_wind_and_omega"product_of_X_and_Y" means X*Y. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_eastward_wind_and_specific_humidity"product_of_X_and_Y" means X*Y. "specific" means per unit mass. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Specific humidity is the mass fraction of water vapor in (moist) air. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_eastward_wind_and_upward_air_velocity"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward" indicates a vector component which is positive when directed upward (negative downward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Upward air velocity is the vertical component of the 3D air velocity vector.
product_of_geopotential_height_and_omega"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_northward_sea_water_velocity_and_salinity"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
product_of_northward_sea_water_velocity_and_temperature"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).
product_of_northward_wind_and_air_temperature"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_northward_wind_and_geopotential_height"product_of_X_and_Y" means X*Y. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_northward_wind_and_omega"product_of_X_and_Y" means X*Y. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_northward_wind_and_specific_humidity
alias: product_of_northward_wind_and_specific_humdity
"product_of_X_and_Y" means X*Y. "specific" means per unit mass. "Northward" indicates a vector component which is positive when directed northward (negative southward). Specific humidity is the mass fraction of water vapor in (moist) air. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
product_of_northward_wind_and_upward_air_velocity"product_of_X_and_Y" means X*Y. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Upward" indicates a vector component which is positive when directed upward (negative downward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) Upward air velocity is the vertical component of the 3D air velocity vector.
product_of_omega_and_air_temperature"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_omega_and_specific_humidity"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_specific_humidity_and_omega"product_of_X_and_Y" means X*Y. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. "omegaX" is used for brevity to mean "lagrangian_tendency_of_air_pressure in standard names constructed as a combination of omega with some other quantity.
product_of_upward_air_velocity_and_air_temperature"product_of_X_and_Y" means X*Y. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.
product_of_upward_air_velocity_and_specific_humidity"product_of_X_and_Y" means X*Y. "specific" means per unit mass. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Specific humidity is the mass fraction of water vapor in (moist) air. Upward air velocity is the vertical component of the 3D air velocity vector.
projection_x_coordinate"x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. Projection coordinates are distances in the x- and y-directions on a plane onto which the surface of the Earth has been projected according to a map projection. The relationship between the projection coordinates and latitude and longitude is described by the grid_mapping.
projection_y_coordinate"y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. Projection coordinates are distances in the x- and y-directions on a plane onto which the surface of the Earth has been projected according to a map projection. The relationship between the projection coordinates and latitude and longitude is described by the grid_mapping.
pseudo_equivalent_potential_temperaturePotential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
pseudo_equivalent_temperature
No help available.
radial_sea_water_velocity_away_from_instrumentA velocity is a vector quantity. Radial velocity away from instrument means the component of the velocity along the line of sight of the instrument where positive implies movement away from the instrument (i.e. outward). The "instrument" (examples are radar and lidar) is the device used to make an observation.
radial_velocity_of_scatterers_away_from_instrumentA velocity is a vector quantity. "Radial velocity away from instrument" means the component of the velocity of the scatterers along the line of sight of the instrument where positive implies movement away from the instrument (i.e. outward). The "instrument" (examples are radar and lidar) is the device used to make the observation, and the "scatterers" are what causes the transmitted signal to be returned to the instrument (examples are aerosols, hydrometeors and refractive index irregularities), of whatever kind the instrument detects.
radiation_frequencyFrequency is the number of oscillations of a wave per unit time. The radiation frequency can refer to any electromagnetic wave, such as light, heat radiation and radio waves.
radiation_wavelength
alias: electromagnetic_wavelength
The radiation wavelength can refer to any electromagnetic wave, such as light, heat radiation and radio waves.
rainfall_amount"Amount" means mass per unit area.
rainfall_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
rainfall_rate
No help available.
rate_of_ hydroxyl_radical_destruction_due_to_reaction_with_nmvocThe "reaction rate" is the rate at which the reactants of a chemical reaction form the products. The rate of "hydroxyl radical destruction due to reaction with nmvoc" is the nmvoc reactivity with regard to reactions with OH. It is the weighted sum of the reactivity of all individual nmvoc species with OH. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The chemical formula for the hydroxyl radical is OH. In chemistry, a "radical" is a highly reactive, and therefore shortlived, species. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
ratio_of_x_derivative_of_ocean_rigid_lid_pressure_to_sea_surface_densitySea surface density is the density of sea water near the surface (including the part under sea-ice, if any). "component_derivative_of_X" means derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, whether or not they are true longitude and latitude. "ratio_of_X_to_Y" means X/Y. "Ocean rigid lid pressure" means the pressure at the surface of an ocean model assuming that it is bounded above by a rigid lid.
ratio_of_y_derivative_of_ocean_rigid_lid_pressure_to_sea_surface_densitySea surface density is the density of sea water near the surface (including the part under sea-ice, if any). "component_derivative_of_X" means derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, whether or not they are true longitude and latitude. "ratio_of_X_to_Y" means X/Y. "Ocean rigid lid pressure" means the pressure at the surface of an ocean model assuming that it is bounded above by a rigid lid.
realizationRealization is used to label a dimension that can be thought of asa statistical sample, e.g., labelling members of a model ensemble.
reference_sea_water_density_for_boussinesq_approximationSea water density is the in-situ density (not the potential density). For a rigid lid Boussinesq geopotential ocean model the density of the sea water is maintained at a constant reference density. In a model using the rigid lid Boussinesq approximation , the vertical grid coordinates (and hence the grid cell volumes) are time invariant.
regionA variable with the standard name of region contains strings which indicate geographical regions. These strings must be chosen from the standard region list.
relative_humidity
No help available.
relative_humidity_for_aerosol_particle_size_selectionRelative humidity at which the size of a sampled aerosol particle was selected. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself.
relative_platform_azimuth_angleStandard names for platform describe the motion and orientation of the vehicle from which observations are made e.g. aeroplane, ship or satellite. relative_platform_azimuth_angle is the difference between the viewing geometries from two different platforms over the same observation target. It is the difference between the values of two quantities with standard name platform_azimuth_angle. There is no standardized sign convention for relative_platform_azimuth_angle. "Observation target" means a location on the Earth defined by the sensor performing the observations. A standard name also exists for relative_sensor_azimuth_angle. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated azimuth angle.
relative_sensor_azimuth_anglerelative_sensor_azimuth_angle is the difference between the viewing geometries from two different sensors over the same observation target. It is the difference between the values of two quantities with standard name sensor_azimuth_angle. There is no standardized sign convention for relative_sensor_azimuth_angle. "Observation target" means a location on the Earth defined by the sensor performing the observations. A standard name also exists for relative_platform_azimuth_angle, where "platform" refers to the vehicle from which observations are made e.g. aeroplane, ship, or satellite. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated azimuth angle.
richardson_number_in_sea_waterRichardson number is a measure of dynamic stability and can be used to diagnose the existence of turbulent flow. It is defined as the ratio of the buoyant suppression of turbulence (i.e. how statically stable or unstable the conditions are) to the kinetic energy available to generate turbulence in a shear flow.
root_carbon_content"Content" indicates a quantity per unit area.
root_depthDepth is the vertical distance below the surface. The root depth is maximum depth of soil reached by plant roots, from which they can extract moisture.
runoff_amount"Amount" means mass per unit area. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage.
runoff_amount_excluding_baseflowRunoff is the liquid water which drains from land. "Runoff_excluding_baseflow" is the sum of surface runoff and subsurface runoff excluding baseflow. Baseflow is subsurface runoff which takes place below the level of the water table. "Amount" means mass per unit area.
runoff_fluxThe geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation. "Sea surface height" is a time-varying quantity. By definition of the geoid, the global average of the time-mean sea surface height (i.e. mean sea level) above the geoid must be zero. The standard name for the height of the sea surface above mean sea level is sea_surface_height_above_sea_level. The standard name for the height of the sea surface above the reference ellipsoid is sea_surface_height_above_reference_ellipsoid.
salt_flux_into_sea_water_from_riversIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
scattering_angleThe scattering angle is that between the direction of the beam of incident radiation and the direction into which it is scattered.
sea_area"X_area" means the horizontal area occupied by X within the grid cell.
sea_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.
sea_floor_depth_below_geoid
alias: sea_floor_depth
The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation.
sea_floor_depth_below_sea_levelsea_level means mean sea level, which is close to the geoid in sea areas.
sea_floor_depth_below_sea_surfaceThe sea_floor_depth_below_sea_surface is the vertical distance between the sea surface and the seabed as measured at a given point in space including the variance caused by tides and possibly waves.
sea_ice_albedoThe albedo of sea ice.
sea_ice_amount"Amount" means mass per unit area.
sea_ice_and_surface_snow_amount"Amount" means mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy. The surface called "surface" means the lower boundary of the atmosphere.
sea_ice_area"X_area" means the horizontal area occupied by X within the grid cell.
sea_ice_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Sea ice area fraction is area of the sea surface occupied by sea ice. It is also called "sea ice concentration".
sea_ice_classificationA variable with the standard name of sea_ice_classification contains strings which indicate the character of the ice surface e.g. open_ice, or first_year_ice. These strings have not yet been standardised. However, and whenever possible, they should follow the terminology defined in the WMO Standard Nomenclature for Sea Ice Classification. Alternatively, the data variable may contain integers which can be translated to strings using flag_values and flag_meanings attributes.
sea_ice_draftSea ice draft is the depth of the sea-ice lower surface below the water surface.
sea_ice_extent
No help available.
sea_ice_freeboardSea ice freeboard is the height of the sea-ice upper surface above the water surface.
sea_ice_mass
No help available.
sea_ice_salinitySea ice salinity is the salt content of sea ice, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s.
sea_ice_speedSpeed is the magnitude of velocity.
sea_ice_surface_temperatureThe surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. "Sea ice surface temperature" is the temperature that exists at the interface of sea ice and an overlying medium which may be air or snow. In areas of snow covered sea ice, sea_ice_surface_temperature is not the same as the quantity with standard name surface_temperature.
sea_ice_temperature
No help available.
sea_ice_thickness
No help available.
sea_ice_transport_across_lineTransport across_line means that which crosses a particular line on the Earth's surface; formally this means the integral along the line of the normal component of the transport.
sea_ice_volume
No help available.
sea_ice_x_displacement"x" indicates a vector component along the grid x-axis, positive with increasing x. "Displacement" means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component. An x displacement is calculated from the difference in the moving object's grid x coordinate between the start and end of the time interval associated with the displacement variable.
sea_ice_x_transport"x" indicates a vector component along the grid x-axis, positive with increasing x.
sea_ice_x_velocityA velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x.
sea_ice_y_displacement"y" indicates a vector component along the grid y-axis, positive with increasing y. "Displacement" means the change in geospatial position of an object that has moved over time. If possible, the time interval over which the motion took place should be specified using a bounds variable for the time coordinate variable. A displacement can be represented as a vector. Such a vector should however not be interpreted as describing a rectilinear, constant speed motion but merely as an indication that the start point of the vector is found at the tip of the vector after the time interval associated with the displacement variable. A displacement does not prescribe a trajectory. Sea ice displacement can be defined as a two-dimensional vector, with no vertical component. A y displacement is calculated from the difference in the moving object's grid y coordinate between the start and end of the time interval associated with the displacement variable.
sea_ice_y_transport"y" indicates a vector component along the grid y-axis, positive with increasing y.
sea_ice_y_velocityA velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y.
sea_surface_densitySea surface density is the density of sea water near the surface (including the part under sea-ice, if any).
sea_surface_foundation_temperatureThe surface called "surface" means the lower boundary of the atmosphere. The sea surface foundation temperature is the water temperature that is not influenced by a thermally stratified layer of diurnal temperature variability (either by daytime warming or nocturnal cooling). The foundation temperature is named to indicate that it is the temperature from which the growth of the diurnal thermocline develops each day, noting that on some occasions with a deep mixed layer there is no clear foundation temperature in the surface layer. In general, sea surface foundation temperature will be similar to a night time minimum or pre-dawn value at depths of between approximately 1 and 5 meters. In the absence of any diurnal signal, the foundation temperature is considered equivalent to the quantity with standard name sea_surface_subskin_temperature. The sea surface foundation temperature defines a level in the upper water column that varies in depth, space, and time depending on the local balance between thermal stratification and turbulent energy and is expected to change slowly over the course of a day. If possible, a data variable with the standard name sea_surface_foundation_temperature should be used with a scalar vertical coordinate variable to specify the depth of the foundation level. Sea surface foundation temperature is measured at the base of the diurnal thermocline or as close to the water surface as possible in the absence of thermal stratification. Only in situ contact thermometry is able to measure the sea surface foundation temperature. Analysis procedures must be used to estimate sea surface foundation temperature value from radiometric satellite measurements of the quantities with standard names sea_surface_skin_temperature and sea_surface_subskin_temperature. Sea surface foundation temperature provides a connection with the historical concept of a "bulk" sea surface temperature considered representative of the oceanic mixed layer temperature that is typically represented by any sea temperature measurement within the upper ocean over a depth range of 1 to approximately 20 meters. The general term, "bulk" sea surface temperature, has the standard name sea_surface_temperature with no associated vertical coordinate axis. Sea surface foundation temperature provides a more precise, well-defined quantity than "bulk" sea surface temperature and, consequently, is more representative of the mixed layer temperature. The temperature of sea water at a particular depth (other than the foundation level) should be reported using the standard name sea_water_temperature and, wherever possible, supplying a vertical coordinate axis or scalar coordinate variable.
sea_surface_height_above_geoid
alias: sea_surface_elevation_anomaly
alias: sea_surface_elevation
The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation. "Sea surface height" is a time-varying quantity. By definition of the geoid, the global average of the time-mean sea surface height (i.e. mean sea level) above the geoid must be zero. The standard name for the height of the sea surface above mean sea level is sea_surface_height_above_sea_level. The standard name for the height of the sea surface above the reference ellipsoid is sea_surface_height_above_reference_ellipsoid.
sea_surface_height_above_reference_ellipsoid"Sea surface height" is a time-varying quantity. A reference ellipsoid is a mathematical figure that approximates the geoid. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. The ellipsoid is an approximation because the geoid is an irregular shape. A number of reference ellipsoids are defined for use in the field of geodesy. The standard name for the height of the sea surface above the geoid is sea_surface_height_above_geoid. The standard name for the height of the sea surface above mean sea level is sea_surface_height_above_sea_level.
sea_surface_height_above_sea_level
alias: sea_surface_height
sea_level means mean sea level, which is close to the geoid in sea areas. "Sea surface height" is a time-varying quantity. The standard name for the height of the sea surface above the geoid is sea_surface_height_above_geoid. The standard name for the height of the sea surface above the reference ellipsoid is sea_surface_height_above_reference_ellipsoid.
sea_surface_height_amplitude_due_to_earth_tideThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Tides are a significant contributor to the observed sea surface height; earth tide means the solid earth tide.
sea_surface_height_amplitude_due_to_equilibrium_ocean_tideThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Tides are a significant contributor to the observed sea surface height; equilibrium ocean tide refers to the long period ocean tide.
sea_surface_height_amplitude_due_to_geocentric_ocean_tideThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Tides are a significant contributor to the observed sea surface height; geocentric ocean tide means the sum total of ocean tide and load tide.
sea_surface_height_amplitude_due_to_non_equilibrium_ocean_tideThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Tides are a significant contributor to the observed sea surface height; non equilibrium ocean tide refers to the long period ocean tide.
sea_surface_height_amplitude_due_to_pole_tideThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Tides are a significant contributor to the observed sea surface height; the pole tide occurs due to variations in the earth's rotation.
sea_surface_height_bias_due_to_sea_surface_roughnessThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Altimeter pulses tend to be more strongly refelected by the troughs of sea surface waves than by the crests leading to a bias in the measured sea surface height. This quantity is commonly known as "sea state bias".
sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequencyThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Air pressure and wind at high frequency" means variations in air pressure with periods shorter than 20 days. These give rise to corresponding variations in sea surface topography. The quantity sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequency should be applied by adding it to the quantity with standard name altimeter_range. Additional altimeter range corrections are given by the quantities with standard names altimeter_range_correction_due_to_wet_troposphere, altimeter_range_correction_due_to_dry_troposphere, altimeter_range_correction_due_to_ionosphere and sea_surface_height_correction_due_to_air_pressure_at_low_frequency.
sea_surface_height_correction_due_to_air_pressure_at_low_frequencyThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Air pressure at low frequency" means variations in air pressure with periods longer than 20 days. These give rise to corresponding variations in sea surface topography. The quantity sea_surface_height_correction_due_to_air_pressure_at_low_frequency is commonly called the "inverted barometer effect" and the correction should be applied by adding it to the quantity with standard name altimeter_range. Additional altimeter range corrections are given by the quantities with standard names altimeter_range_correction_due_to_wet_troposphere, altimeter_range_correction_due_to_dry_troposphere, altimeter_range_correction_due_to_ionosphere and sea_surface_height_correction_due_to_air_pressure_and_wind_at_high_frequency.
sea_surface_salinitySea surface salinity is the salt content of sea water close to the sea surface, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and the units attribute should normally be given as 1e-3 or 0.001 i.e. parts per thousand. Sea surface salinity is often abbreviated as "SSS". For the salinity of sea water at a particular depth or layer, a data variable of "sea_water_salinity" or one of the more precisely defined salinities should be used with a vertical coordinate axis. There are standard names for the precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
sea_surface_skin_temperatureThe surface called "surface" means the lower boundary of the atmosphere. The sea surface skin temperature is the temperature measured by an infrared radiometer typically operating at wavelengths in the range 3.7 - 12 micrometers. It represents the temperature within the conductive diffusion-dominated sub-layer at a depth of approximately 10 - 20 micrometers below the air-sea interface. Measurements of this quantity are subject to a large potential diurnal cycle including cool skin layer effects (especially at night under clear skies and low wind speed conditions) and warm layer effects in the daytime.
sea_surface_subskin_temperatureThe surface called "surface" means the lower boundary of the atmosphere. The sea surface subskin temperature is the temperature at the base of the conductive laminar sub-layer of the ocean surface, that is, at a depth of approximately 1 - 1.5 millimeters below the air-sea interface. For practical purposes, this quantity can be well approximated to the measurement of surface temperature by a microwave radiometer operating in the 6 - 11 gigahertz frequency range, but the relationship is neither direct nor invariant to changing physical conditions or to the specific geometry of the microwave measurements. Measurements of this quantity are subject to a large potential diurnal cycle due to thermal stratification of the upper ocean layer in low wind speed high solar irradiance conditions.
sea_surface_swell_wave_mean_period_from_variance_spectral_density_first_frequency_momentThe swell wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction to give S1= integral(S dtheta). Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The first wave period, T(m1), is calculated as the ratio M(0)/M(1).
sea_surface_swell_wave_mean_period_from_variance_spectral_density_inverse_frequency_momentThe swell wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction to give S1= integral(S dtheta). Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The inverse wave period, T(m-1), is calculated as the ratio M(-1)/M(0).
sea_surface_swell_wave_mean_period_from_variance_spectral_density_second_frequency_momentThe swell wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction to give S1= integral(S dtheta). Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The second wave period, T(m2), is calculated as the square root of the ratio M(0)/M(2).
sea_surface_swell_wave_period
alias: swell_wave_period
A period is an interval of time, or the time-period of an oscillation. Swell waves are waves on the ocean surface.
sea_surface_swell_wave_significant_height
alias: significant_height_of_swell_waves
Height is the vertical distance above the surface. Swell waves are waves on the ocean surface.
sea_surface_swell_wave_to_direction
alias: direction_of_swell_wave_velocity
Swell waves are waves on the ocean surface. "to_direction" is used in the construction X_to_direction and indicates the direction towards which the velocity vector of X is headed. The direction is a bearing in the usual geographical sense, measured positive clockwise from due north.
sea_surface_swell_wave_zero_upcrossing_periodA period is an interval of time, or the time-period of an oscillation. The zero upcrossing period is defined as the time interval between consecutive occasions on which the surface height passes upward above the mean level. Swell waves are waves on the ocean surface.
sea_surface_temperatureSea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used.
sea_surface_wave_directional_variance_spectral_densitySea surface wave directional variance spectral density is the variance of the amplitude of the waves within given ranges of direction and wave frequency.
sea_surface_wave_from_direction"from_direction" is used in the construction X_from_direction and indicates the direction from which the velocity vector of X is coming.
sea_surface_wave_mean_period_from_variance_spectral_density_first_frequency_momentThe wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S has the standard name sea_surface_wave_directional_variance_spectral_density. S can be integrated over direction to give S1= integral(S dtheta) and this quantity has the standard name sea_surface_wave_variance_spectral_density. Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The first wave period, T(m1) is calculated as the ratio M(0)/M(1).
sea_surface_wave_mean_period_from_variance_spectral_density_inverse_frequency_momentThe wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S has the standard name sea_surface_wave_directional_variance_spectral_density. S can be integrated over direction to give S1= integral(S dtheta) and this quantity has the standard name sea_surface_wave_variance_spectral_density. Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The inverse wave period, T(m-1), is calculated as the ratio M(-1)/M(0).
sea_surface_wave_mean_period_from_variance_spectral_density_second_frequency_momentThe wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S has the standard name sea_surface_wave_directional_variance_spectral_density. S can be integrated over direction to give S1= integral(S dtheta) and this quantity has the standard name sea_surface_wave_variance_spectral_density. Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The second wave period, T(m2) is calculated as the square root of the ratio M(0)/M(2).
sea_surface_wave_period_at_variance_spectral_density_maximumA period is an interval of time, or the time-period of an oscillation. The sea_surface_wave_period_at_variance_spectral_density_maximum, sometimes called peak wave period, is the period of the most energetic waves in the total wave spectrum at a specific location.
sea_surface_wave_significant_height
alias: significant_height_of_wind_and_swell_waves
Height is the vertical distance above the surface.
sea_surface_wave_to_direction"to_direction" is used in the construction X_to_direction and indicates the direction towards which the velocity vector of X is headed. The direction is a bearing in the usual geographical sense, measured positive clockwise from due north.
sea_surface_wave_variance_spectral_densitySea surface wave variance spectral density is the variance of wave amplitude within a range of wave frequency.
sea_surface_wave_zero_upcrossing_periodA period is an interval of time, or the time-period of an oscillation. The zero upcrossing period is defined as the time interval between consecutive occasions on which the surface height passes upward above the mean level.
sea_surface_wind_wave_mean_period_from_variance_spectral_density_first_frequency_momentThe wind wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction to give S1= integral(S dtheta) . Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The first wave period, T(m1) is calculated as the ratio M(0)/M(1).
sea_surface_wind_wave_mean_period_from_variance_spectral_density_inverse_frequency_momentThe wind wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction to give S1= integral(S dtheta). Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The inverse wave period, T(m-1), is calculated as the ratio M(-1)/M(0).
sea_surface_wind_wave_mean_period_from_variance_spectral_density_second_frequency_momentThe wind wave directional spectrum can be written as a five dimensional function S(t,x,y,f,theta) where t is time, x and y are horizontal coordinates (such as longitude and latitude), f is frequency and theta is direction. S can be integrated over direction, thus S1= integral(S dtheta). Frequency moments, M(n) of S1 can then be calculated as follows: M(n) = integral(S1 f^n df), where f^n is f to the power of n. The second wave period, T(m2), is calculated as the square root of the ratio M(0)/M(2).
sea_surface_wind_wave_period
alias: wind_wave_period
A period is an interval of time, or the time-period of an oscillation. Wind waves are waves on the ocean surface. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
sea_surface_wind_wave_significant_height
alias: significant_height_of_wind_waves
Height is the vertical distance above the surface. Wind waves are waves on the ocean surface. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
sea_surface_wind_wave_to_direction
alias: direction_of_wind_wave_velocity
Wind waves are waves on the ocean surface. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name "upward_air_velocity".) "to_direction" is used in the construction X_to_direction and indicates the direction towards which the velocity vector of X is headed. The direction is a bearing in the usual geographical sense, measured positive clockwise from due north.
sea_surface_wind_wave_zero_upcrossing_periodA period is an interval of time, or the time-period of an oscillation. The zero upcrossing period is defined as the time interval between consecutive occasions on which the surface height passes upward above the mean level. Wind waves are waves on the ocean surface. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
sea_water_absolute_salinityAbsolute Salinity, S_A, is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the Intergovernmental Oceanographic Commission (IOC). It is the mass fraction of dissolved material in sea water. Absolute Salinity incorporates the spatial variations in the composition of sea water. This type of Absolute Salinity is also called "Density Salinity". TEOS-10 estimates Absolute Salinity as the salinity variable that, when used with the TEOS-10 expression for density, yields the correct density of a sea water sample even when the sample is not of Reference Composition. In practice, Absolute Salinity is often calculated from Practical Salinity using a spatial lookup table of pre-defined values of the Absolute Salinity Anomaly. It is recommended that the version of (TEOS-10) software and the associated Absolute Salinity Anomaly climatology be specified within metadata by attaching a comment attribute to the data variable. Reference: www.teos-10.org; Millero et al., 2008 doi: 10.1016/j.dsr.2007.10.001. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 onwards), sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
sea_water_age_since_surface_contact"Sea water age since surface contact" means the length of time elapsed since the sea water in a grid cell was last in the surface level of an ocean model.
sea_water_alkalinity_expressed_as_mole_equivalent'sea_water_alkalinity_expressed_as_mole_equivalent' is the total alkalinity equivalent concentration (including carbonate, nitrogen, silicate, and borate components).
sea_water_conservative_temperatureConservative Temperature is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the International Oceanographic Commission (IOC). Conservative Temperature is specific potential enthalpy (which has the standard name sea_water_specific_potential_enthalpy) divided by a fixed value of the specific heat capacity of sea water, namely cp_0 = 3991.86795711963 J kg-1 K-1. Conservative Temperature is a more accurate measure of the "heat content" of sea water, by a factor of one hundred, than is potential temperature. Because of this, it can be regarded as being proportional to the heat content of sea water per unit mass. Reference: www.teos-10.org; McDougall, 2003 doi: 10.1175/1520-0485(2003)033<0945:PEACOV>2.0.CO;2.
sea_water_cox_salinityCox Salinity, S_C, is defined unitless as a mass fraction per mil (0/00) or "parts per thousand". S_C was the standard salinity measure from 1967 until Practical Salinity, S_P, was established with PSS-78 (1978). Chlorinity, Cl, is calculated from the conductivity of a sea water sample and since the work of the Joint Panel for Oceanographic Tables and Standards (JPOTS; 1966) is converted into Cox Salinity using S_C = 1.80655Cl. This type of salinity was called simply "salinity" from 1967 to 1978. Cox Salinity was replaced by Practical Salinity in 1978. Cox Salinity is converted to Practical Salinity following S_P = S_C, however the accuracy of this is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of the Practical Salinity Scale 1978 (PSS-78). Reference: Cox et al., 1967 doi: 10.1016/0011-7471(67)90006-X; Lyman, 1969 doi: 10.4319/lo.1969.14.6.0928; Wooster et al., 1969 doi: 10.4319/lo.1969.14.3.0437. There are standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_practical_salinity, S_P, sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_* and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
sea_water_densitySea water density is the in-situ density (not the potential density). If 1000 kg m-3 is subtracted, the standard name sea_water_sigma_t should be chosen instead.
sea_water_electrical_conductivity
No help available.
sea_water_knudsen_salinityKnudsen Salinity, S_K, is defined unitless as a mass fraction per mil (0/00) or "parts per thousand", and was calculated from the titration of inorganic salts from a sample of sea water after a commission to study the problem of determining salinity and density was initiated by the International Council for the Exploration of the Sea (ICES) in 1899. S_K was the standard salinity measure until S_C (Cox Salinity) was established in 1967. Since the work of Knudsen (1901), chlorinity is converted into Knudsen Salinity using S_K = 0.030 + 1.805 Cl. This type of salinity was called simply "salinity" from 1901 to 1966. From the 1960s on, electrical conductivity began to be used to estimate the Knudsen Salinity, rather than chemical titration. Knudsen Salinity was replaced by Cox Salinity in 1967 which was in turn replaced by Practical Salinity, S_P, in 1978. Conversion of Knudsen Salinity to Practical Salinity follows S_P = (S_K - 0.03) * (1.80655 / 1.805). Reference: Knudsen, 1901; Thomas et al., 1934 doi: 10.1093/icesjms/9.1.28; Lyman, 1969 doi: 10.4319/lo.1969.14.6.0928; Wooster et al., 1969 doi: 10.4319/lo.1969.14.3.0437; Lewis, 1980 doi: 10.1109/JOE.1980.1145448; Millero et al., 2008 doi: 10.1016/j.dsr.2007.10.001. There are standard names for the precisely defined salinity quantities sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P, sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_* and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
sea_water_massThe quantity with standard name "sea_water_mass" is the total mass of liquid seawater in the global oceans, including enclosed seas.
sea_water_mass_per_unit_areaSea_water_mass_per_unit_area is the mass per unit area of the sea water contained within each grid cell.
sea_water_neutral_density"Neutral density" is a variable designed so that a surface of constant neutral density everywhere has a local slope that is close to the local slope of the neutral tangent plane. At the sea surface in the equatorial Pacific neutral density is very close to the potential density anomaly. At other locations, this is not the case. For example, along a neutral density surface there is a difference of up to 0.14 kg/m^3 in the potential density anomaly at the outcrops in the Southern and Northern hemispheres. Refer to Jackett & McDougall (1997; Journal of Physical Oceanography, Vol 27, doi: 10.1175/1520-0485(1997)027<0237:ANDVFT>2.0.CO;2) for more information.
sea_water_ph_reported_on_total_scale'sea_water_pH_reported_on_total_scale' is the measure of acidity of seawater, defined as the negative logarithm of the activity of dissolved hydrogen ions plus bisulfate ions in a sea water medium; it can be measured or calculated; when measured the scale is defined according to a series of buffers prepared in artificial seawater containing bisulfate. The quantity may be written as pH(total) = -log([H+](free) + [HSO4-]).
sea_water_potential_densityPotential density is the density a parcel of air or sea water would have if moved adiabatically to a reference pressure, by default assumed to be sea level pressure. For sea water potential density, if 1000 kg m-3 is subtracted, the standard name sea_water_sigma_theta should be chosen instead.
sea_water_potential_temperaturePotential temperature is the temperature a parcel of air or sea water would have if moved adiabatically to sea level pressure.
sea_water_practical_salinityPractical Salinity, S_P, is defined on the Practical Salinity Scale of 1978 (PSS-78) and is calculated from the electrical conductivity of sea water (as well as temperature and pressure). Officially S_P is dimensionless so that, while convenient, and while it is common practice, it is not officially sanctioned to say S_P = 35 psu. Often authors use PSS-78, as in S_P = 35 PSS-78. If salinity was measured using remote sensing techniques and not conductivity, then it is recommended that additional metadata (calibration/validation information) be described in the variable comment attribute. This name should be used to describe salinity observations made from 1978 onwards (Practical Salinity is the salinity quantity stored by national data centres for post-1978 observations). The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity. Reference: www.teos-10.org; Lewis, 1980 doi:10.1109/JOE.1980.1145448
sea_water_preformed_salinityPreformed Salinity, S*, is defined as part of the Thermodynamic Equation of Seawater 2010 (TEOS-10) which was adopted in 2010 by the Intergovernmental Oceanographic Commission (IOC). Preformed Salinity is a salinity variable that is designed to be as conservative as possible, by removing the estimated biogeochemical influences on the sea water composition. Preformed Salinity is Absolute Salinity, S_A (which has the standard name sea_water_absolute_salinity), minus all contributions to sea water composition from biogeochemical processes. Preformed Salinity is the mass fraction of dissolved material in sea water. Reference: www.teos-10.org; Pawlowicz et al., 2011 doi: 10.5194/os-7-363-2011; Wright et al., 2011 doi: 10.5194/os-7-1-2011. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 onwards), and sea_water_reference_salinity. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
sea_water_pressure"Sea water pressure" is the pressure that exists in the medium of sea water. It includes the pressure due to overlying sea water, sea ice, air and any other medium that may be present. For sea water pressure excluding the pressure due to overlying media other than sea water, the standard name sea_water_pressure_due_to_sea_water should be used.
sea_water_pressure_at_sea_floor"Sea water pressure" is the pressure that exists in the medium of sea water. It includes the pressure due to overlying sea water, sea ice, air and any other medium that may be present.
sea_water_pressure_at_sea_water_surfaceThe surface called "surface" means the lower boundary of the atmosphere. "Sea water pressure" is the pressure that exists in the medium of sea water. It includes the pressure due to overlying sea water, sea ice, air and any other medium that may be present.
sea_water_pressure_due_to_sea_waterThe pressure that exists in the medium of sea water due to overlying sea water. Excludes the pressure due to sea ice, air and any other medium that may be present. For sea water pressure including the pressure due to overlying media other than sea water, the standard name sea_water_pressure should be used.
sea_water_reference_salinityIf a sea water sample has the Reference Composition (defined in Millero et al., 2008), then its Reference Salinity is the best available estimate of its Absolute Salinity. For general purposes, Reference Salinity is (35.16504 g kg-1)/35 times Practical Salinity. Reference: www.teos-10.org; Millero et al., 2008 doi: 10.1016/j.dsr.2007.10.001. There are also standard names for the precisely defined salinity quantities sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity (used for salinity observations from 1978 onwards), sea_water_absolute_salinity, S_A, and sea_water_preformed_salinity, S_*. Salinity quantities that do not match any of the precise definitions should be given the more general standard name of sea_water_salinity.
sea_water_salinitySea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and the units attribute should normally be given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
sea_water_sigma_tSigma-t of sea water is the density of water at atmospheric pressure (i.e. the surface) having the same temperature and salinity, minus 1000 kg m-3. Note that sea water sigma is not the same quantity as the dimensionless ocean sigma coordinate (see Appendix D of the CF convention), for which there is another standard name.
sea_water_sigma_thetaSigma-theta of sea water is the potential density (i.e. the density when moved adiabatically to a reference pressure) of water having the same temperature and salinity, minus 1000 kg m-3. Note that sea water sigma is not the same quantity as the dimensionless ocean sigma coordinate (see Appendix D of the CF convention), for which there is another standard name.
sea_water_specific_potential_enthalpyThe potential enthalpy of a sea water parcel is the specific enthalpy after an adiabatic and isohaline change in pressure from its in situ pressure to the sea pressure p = 0 dbar. "specific" means per unit mass. Reference: www.teos-10.org; McDougall, 2003 doi: 10.1175/1520-0485(2003)033<0945:PEACOV>2.0.CO;2.
sea_water_speedSpeed is the magnitude of velocity.
sea_water_temperatureSea water temperature is the in situ temperature of the sea water. To specify the depth at which the temperature applies use a vertical coordinate variable or scalar coordinate variable. There are standard names for sea_surface_temperature, sea_surface_skin_temperature, sea_surface_subskin_temperature and sea_surface_foundation_temperature which can be used to describe data located at the specified surfaces. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
sea_water_transport_across_lineTransport across_line means that which crosses a particular line on the Earth's surface; formally this means the integral along the line of the normal component of the transport.
sea_water_turbidityTurbidity is a dimensionless quantity which is expressed in NTU (Nephelometric Turbidity Units). Turbidity expressed in NTU is the proportion of white light scattered back to a transceiver by the particulate load in a body of water, represented on an arbitrary scale referenced against measurements made in the laboratory on aqueous suspensions of formazine beads. Sea water turbidity may also be measured by the quantity with standard name secchi_depth_of_sea_water.
sea_water_volumeThe quantity with standard name "sea_water_volume" is the total volume of liquid seawater in the global oceans, including enclosed seas.
sea_water_x_velocity
alias: x_sea_water_velocity
A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x.
sea_water_y_velocity
alias: y_sea_water_velocity
A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y.
secchi_depth_of_sea_waterDepth is the vertical distance below the surface. A Secchi disk is a patterned disk that is used to measure water transparency, also called turbidity, in oceans and lakes. The disk is lowered into the water and the depth at which the pattern is no longer visible is the called the secchi depth. Sea water turbidity may also be measured by the quantity with standard name sea_water_turbidity.
sensor_azimuth_anglesensor_azimuth_angle is the horizontal angle between the line of sight from the observation point to the sensor and a reference direction at the observation point, which is often due north. The angle is measured clockwise positive, starting from the reference direction. A comment attribute should be added to a data variable with this standard name to specify the reference direction. A standard name also exists for platform_azimuth_angle, where "platform" refers to the vehicle from which observations are made e.g. aeroplane, ship, or satellite. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated azimuth angle.
sensor_band_central_radiation_frequencysensor_band_central_radiation_frequency is the central frequency of a sensor's band, calculated as the first moment of the band's normalized spectral response function.
sensor_band_central_radiation_wavelengthsensor_band_central_radiation_wavelength is the central wavelength of a sensor's band, calculated as the first moment of the band's normalized spectral response function.
sensor_band_central_radiation_wavenumbersensor_band_central_radiation_wavenumber is the central wavenumber of a sensor's band, calculated as the first moment of the band's normalized spectral response function.
sensor_band_identifierA variable with the standard name of sensor_band_identifier contains strings which give the alphanumeric identifier of a sensor band. These strings have not yet been standardised.
sensor_view_angleSensor view angle is the angle between the line of sight from the sensor and the direction straight vertically down. Zero view angle means looking directly beneath the sensor. There is no standardized sign convention for sensor_view_angle. A standard name also exists for platform_view_angle, where "platform" refers to the vehicle from which observations are made e.g. aeroplane, ship, or satellite. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated view angle.
sensor_zenith_anglesensor_zenith_angle is the angle between the line of sight to the sensor and the local zenith at the observation target. This angle is measured starting from directly overhead and its range is from zero (directly overhead the observation target) to 180 degrees (directly below the observation target). Local zenith is a line perpendicular to the Earth's surface at a given location. "Observation target" means a location on the Earth defined by the sensor performing the observations. A standard name also exists for platform_zenith_angle, where "platform" refers to the vehicle from which observations are made e.g. aeroplane, ship, or satellite. For some viewing geometries the sensor and the platform cannot be assumed to be close enough to neglect the difference in calculated zenith angle.
shallow_convection_time_fraction"Time fraction" means a fraction of a time interval. The interval in question must be specified by the values or bounds of the time coordinate variable associated with the data. "X_time_fraction" means the fraction of the time interval during which X occurs.
sinking_mole_flux_of_aragonite_expressed_as_carbon_in_sea_waterThe phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
sinking_mole_flux_of_calcite_expressed_as_carbon_in_sea_waterThe phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
sinking_mole_flux_of_particulate_iron_in_sea_waterIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid.
sinking_mole_flux_of_particulate_organic_matter_expressed_as_carbon_in_sea_waterThe phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid.
sinking_mole_flux_of_particulate_organic_nitrogen_in_sea_waterIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid.
sinking_mole_flux_of_particulate_organic_phosphorus_in_sea_waterIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid.
sinking_mole_flux_of_particulate_silicon_in_sea_waterIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. 'Sinking' is the gravitational settling of particulate matter suspended in a liquid. A sinking flux is positive downwards and is calculated relative to the movement of the surrounding fluid.
slow_soil_pool_carbon_content"Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. "Soil carbon" is the organic matter present in soil quantified by the mass of carbon it contains. Soil carbon is returned to the atmosphere as the organic matter decays. The decay process takes varying amounts of time depending on the composition of the organic matter, the temperature and the availability of moisture. A carbon "soil pool" means the carbon contained in organic matter which has a characteristic period over which it decays and releases carbon into the atmosphere. "Slow soil pool" refers to the decay of organic matter in soil with a characteristic period of more than a hundred years under reference climate conditions of a temperature of 20 degrees Celsius and no water limitations.
snow_density
No help available.
snowfall_amount"Amount" means mass per unit area.
snowfall_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
snow_grain_size
No help available.
soil_albedoSoil albedo is the albedo of the soil surface assuming no snow.
soil_carbon_content"Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used.
soil_frozen_water_content"frozen_water" means ice. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used.
soil_hydraulic_conductivity_at_saturationHydraulic conductivity is the constant k in Darcy's Law q=-k grad h for fluid flow q (volume transport per unit area i.e. velocity) through a porous medium, where h is the hydraulic head (pressure expressed as an equivalent depth of water).
soil_moisture_content"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used.
soil_moisture_content_at_field_capacity"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. The field capacity of soil is the maximum content of water it can retain against gravitational drainage.
soil_porosityThe soil porosity is the proportion of its total volume not occupied by soil solids.
soil_respiration_carbon_flux"Respiration carbon" refers to the rate at which biomass is respired expressed as the mass of carbon which it contains. Soil respiration is the sum of respiration in the soil by animals and decomposers of litter (heterotrophs or "consumers"), which have not produced the biomass they respire, and respiration by the roots of plants (autotrophs or "producers"), which have themselves produced the biomass they respire. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
soil_suction_at_saturationSoil suction is the tensile stress on water in soil due to molecular forces acting at the water-soil particle boundary. The forces may cause water to be drawn into the spaces within the soil matrix or cause it to be held in the soil without draining. Soil suction occurs in soil above the water table.
soil_temperatureSoil temperature is the bulk temperature of the soil, not the surface (skin) temperature.
soil_thermal_capacityThermal capacity, or heat capacity, is the amount of heat energy required to increase the temperature of 1 kg of material by 1 K. It is a property of the material.
soil_thermal_conductivityThermal conductivity is the constant k in the formula q = -k grad T where q is the heat transfer per unit time per unit area of a surface normal to the direction of transfer and grad T is the temperature gradient. Thermal conductivity is a property of the material.
soil_typeA variable with the standard name of soil_type contains strings which indicate the character of the soil e.g. clay. These strings have not yet been standardised. Alternatively, the data variable may contain integers which can be translated to strings using flag_values and flag_meanings attributes.
solar_azimuth_angleSolar azimuth angle is the horizontal angle between the line of sight to the sun and a reference direction which is often due north. The angle is measured clockwise.
solar_elevation_angleSolar elevation angle is the angle between the line of sight to the sun and the local horizontal.
solar_zenith_angleSolar zenith angle is the the angle between the line of sight to the sun and the local vertical.
soot_content_of_surface_snow
alias: snow_soot_content
"Content" indicates a quantity per unit area. The surface called "surface" means the lower boundary of the atmosphere.
sound_frequencyFrequency is the number of oscillations of a wave per unit time.
sound_intensity_in_airSound intensity is the sound energy per unit time per unit area.
sound_intensity_in_waterSound intensity is the sound energy per unit time per unit area.
sound_intensity_level_in_airSound intensity is the sound energy per unit time per unit area. Sound intensity level in air is expressed on a logarithmic scale with reference to a sound intensity of 1e-12 W m-2. LI = 10 log10(I/I0) where LI is sound intensity level, I is sound intensity and I0 is the reference sound intensity.
sound_intensity_level_in_waterSound intensity is the sound energy per unit time per unit area. Sound intensity level in water is expressed on a logarithmic scale with reference to a sound intensity of 6.7e-19 W m-2. LI = 10 log10(I/I0) where LI is sound intensity level, I is sound intensity and I0 is the reference sound intensity.
sound_pressure_in_airSound pressure is the difference from the local ambient pressure caused by a sound wave at a particular location and time.
sound_pressure_in_waterSound pressure is the difference from the local ambient pressure caused by a sound wave at a particular location and time.
sound_pressure_level_in_airSound pressure is the difference from the local ambient pressure caused by a sound wave at a particular location and time. Sound pressure level in air is expressed on a logarithmic scale with reference to a sound pressure of 2e-5 Pa. Lp = 20 log10(p/p0) where Lp is the sound pressure level, p is the rms sound pressure and p0 is the reference sound pressure.
sound_pressure_level_in_waterSound pressure is the difference from the local ambient pressure caused by a sound wave at a particular location and time. Sound pressure level in water is expressed on a logarithmic scale with reference to a sound pressure of 1e-6 Pa. Lp = 20 log10(p/p0) where Lp is the sound pressure level, p is the rms sound pressure and p0 is the reference sound pressure.
specific_dry_energy_of_air"specific" means per unit mass. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
specific_gravitational_potential_energy
alias: specific_potential_energy
"specific" means per unit mass. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
specific_humidity"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
specific_kinetic_energy_of_air"specific" means per unit mass.
specific_kinetic_energy_of_sea_water"specific" means per unit mass.
speed_of_sound_in_airSpeed is the magnitude of velocity.
speed_of_sound_in_sea_waterSpeed is the magnitude of velocity.
spell_length_of_days_with_air_temperature_above_thresholdAir temperature is the bulk temperature of the air, not the surface (skin) temperature. A spell is the number of consecutive days on which the condition X_below|above_threshold is satisified. A variable whose standard name has the form spell_length_of_days_with_X_below|above_threshold must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_method entry for within days which describes the processing of quantity X before the threshold is applied. A spell_length_of_days is an intensive quantity in time, and the cell_methods entry for over days can be any of the methods listed in Appendix E appropriate for intensive quantities e.g. "maximum", "minimum" or "mean".
spell_length_of_days_with_air_temperature_below_thresholdAir temperature is the bulk temperature of the air, not the surface (skin) temperature. A spell is the number of consecutive days on which the condition X_below|above_threshold is satisified. A variable whose standard name has the form spell_length_of_days_with_X_below|above_threshold must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_method entry for within days which describes the processing of quantity X before the threshold is applied. A spell_length_of_days is an intensive quantity in time, and the cell_methods entry for over days can be any of the methods listed in Appendix E appropriate for intensive quantities e.g. "maximum", "minimum" or "mean".
spell_length_of_days_with_lwe_thickness_of_precipitation_amount_above_threshold"Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "lwe" means liquid water equivalent. A spell is the number of consecutive days on which the condition X_below|above_threshold is satisified. A variable whose standard name has the form spell_length_of_days_with_X_below|above_threshold must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_method entry for within days which describes the processing of quantity X before the threshold is applied. A spell_length_of_days is an intensive quantity in time, and the cell_methods entry for over days can be any of the methods listed in Appendix E appropriate for intensive quantities e.g. "maximum", "minimum" or "mean".
spell_length_of_days_with_lwe_thickness_of_precipitation_amount_below_threshold"Amount" means mass per unit area. The construction lwe_thickness_of_X_amount or _content means the vertical extent of a layer of liquid water having the same mass per unit area. "lwe" means liquid water equivalent. A spell is the number of consecutive days on which the condition X_below|above_threshold is satisified. A variable whose standard name has the form spell_length_of_days_with_X_below|above_threshold must have a coordinate variable or scalar coordinate variable with the a standard name of X to supply the threshold(s). It must have a climatological time variable, and a cell_method entry for within days which describes the processing of quantity X before the threshold is applied. A spell_length_of_days is an intensive quantity in time, and the cell_methods entry for over days can be any of the methods listed in Appendix E appropriate for intensive quantities e.g. "maximum", "minimum" or "mean".
square_of_air_temperature"square_of_X" means X*X. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
square_of_brunt_vaisala_frequency_in_air"square_of_X" means X*X. Frequency is the number of oscillations of a wave per unit time.
square_of_eastward_wind"square_of_X" means X*X. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
square_of_geopotential_height"square_of_X" means X*X. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface.
square_of_lagrangian_tendency_of_air_pressure"square_of_X" means X*X. "tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.
square_of_northward_wind"square_of_X" means X*X. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
square_of_ocean_mixed_layer_thickness_defined_by_sigma_tThe ocean mixed layer is the upper part of the ocean, regarded as being well-mixed. The base of the mixed layer defined by temperature, sigma, sigma_theta or sigma_t is the level at which the quantity indicated differs from its surface value by a certain amount. "Thickness" means the vertical extent of a layer. "square_of_X" means X*X.
square_of_sea_surface_height_above_geoidThe geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. (The volume enclosed between the geoid and the sea floor equals the mean volume of water in the ocean.) In an ocean GCM the geoid is the surface of zero depth, or the rigid lid if the model uses that approximation. "Sea surface height" is a time-varying quantity. "square_of_X" means X*X.
square_of_sea_surface_temperatureSea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. "square_of_X" means X*X.
square_of_upward_air_velocity"square_of_X" means X*X. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.
square_of_upward_ocean_mass_transport"Upward" indicates a vector component which is positive when directed upward (negative downward). Ocean transport means transport by all processes, both sea water and sea ice. "square_of_X" means X*X.
stratiform_cloud_area_fraction
alias: large_scale_cloud_area_fraction
"X_area_fraction" means the fraction of horizontal area occupied by X. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
stratiform_cloud_area_fraction_in_atmosphere_layer"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes).
stratiform_cloud_longwave_emissivityEmissivity is the ratio of the power emitted by an object to the power that would be emitted by a perfect black body having the same temperature as the object. The emissivity is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength or radiation_frequency is included to specify either the wavelength or frequency. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). "longwave" means longwave radiation.
stratiform_graupel_flux
alias: large_scale_graupel_flux
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
stratiform_precipitation_amount
alias: large_scale_precipitation_amount
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "Amount" means mass per unit area.
stratiform_precipitation_flux
alias: large_scale_precipitation_flux
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
stratiform_rainfall_amount
alias: large_scale_rainfall_amount
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "Amount" means mass per unit area.
stratiform_rainfall_flux
alias: large_scale_rainfall_flux
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
stratiform_rainfall_rate
alias: large_scale_rainfall_rate
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
stratiform_snowfall_amount
alias: large_scale_snowfall_amount
Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "Amount" means mass per unit area.
stratiform_snowfall_flux
alias: large_scale_snowfall_flux
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
stratosphere_mole_content_of_nitrogen_dioxide"Content" indicates a quantity per unit area. The "stratosphere content" of a quantity refers to the vertical integral from the tropopause to the stratopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrogen_dioxide is NO2.
subsurface_litter_carbon_content"Content" indicates a quantity per unit area. "Litter carbon" is dead plant material in or above the soil quantified as the mass of carbon which it contains. The surface called "surface" means the lower boundary of the atmosphere.
subsurface_runoff_amount"Amount" means mass per unit area. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage.
subsurface_runoff_fluxRunoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
sunlit_binary_maskX_binary_mask has 1 where condition X is met, 0 elsewhere.
surface_air_pressureThe surface called "surface" means the lower boundary of the atmosphere.
surface_albedoThe surface called "surface" means the lower boundary of the atmosphere.
surface_albedo_assuming_deep_snowThe surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition.
surface_albedo_assuming_no_snowThe surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition.
surface_altitudeThe surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
surface_backwards_scattering_coefficient_of_radar_waveThe scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Scattering of radiation is its deflection from its incident path without loss of energy. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity.
surface_bidirectional_reflectanceThe surface called "surface" means the lower boundary of the atmosphere. "Bidirectional_reflectance" depends on the angles of incident and measured radiation. Reflectance is the ratio of the energy of the reflected to the incident radiation. A coordinate variable of radiation_wavelength or radiation_frequency can be used to specify the wavelength or frequency, respectively, of the radiation.
surface_brightness_temperatureThe surface called "surface" means the lower boundary of the atmosphere.The brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area.
surface_carbon_dioxide_partial_pressure_difference_between_air_and_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.
surface_carbon_dioxide_partial_pressure_difference_between_sea_water_and_airThe partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2.
surface_diffuse_downwelling_photosynthetic_radiative_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_diffuse_downwelling_shortwave_flux_in_airDownwelling radiation is radiation from above. It does not mean "net downward". "Diffuse" radiation is radiation that has been scattered by particles in the atmosphere such as cloud droplets and aerosols. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation.
surface_diffuse_downwelling_shortwave_flux_in_air_assuming_clear_skyDownwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". "Diffuse" radiation is radiation that has been scattered by particles in the atmosphere such as cloud droplets and aerosols. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. A phrase "assuming_condition" indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation.
surface_downward_eastward_stressThe surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface.
surface_downward_heat_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The vertical heat flux in air is the sum of all heat fluxes i.e. radiative, latent and sensible. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downward_heat_flux_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. "Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downward_heat_flux_in_snow"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere.
surface_downward_latent_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downward_mass_flux_of_ammonia"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for ammonia is NH3.
surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon"Downward" indicates a vector component which is positive when directed downward (negative upward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2.
surface_downward_mole_flux_of_carbon_dioxide
alias: surface_carbon_dioxide_mole_flux
"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. The standard name surface_upward_mole_flux_of_carbon_dioxide should be used to label data in which the flux is positive when directed upward. The standard name "surface_carbon_dioxide_mole_flux" is deprecated because it does not specify in which direction the flux is positive. Any data having the standard name "surface_carbon_dioxide_mole_flux" should be examined carefully to determine which sign convention was used.
surface_downward_mole_flux_of_molecular_oxygen"Downward" indicates a vector component which is positive when directed downward (negative upward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere.
surface_downward_northward_stressThe surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface.
surface_downward_sensible_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downward_water_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface water flux is the result of precipitation and evaporation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downward_x_stressThe surface called "surface" means the lower boundary of the atmosphere. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Downward" indicates a vector component which is positive when directed downward (negative upward).
surface_downward_x_stress_correction"x" indicates a vector component along the grid x-axis, positive with increasing x. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface called "surface" means the lower boundary of the atmosphere. A downward x stress is a downward flux of momentum towards the positive direction of the model's x-axis.
surface_downward_y_stressThe surface called "surface" means the lower boundary of the atmosphere. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Downward" indicates a vector component which is positive when directed downward (negative upward).
surface_downward_y_stress_correction"y" indicates a vector component along the grid y-axis, positive with increasing y. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface called "surface" means the lower boundary of the atmosphere. A downward y stress is a downward flux of momentum towards the positive direction of the model's y-axis.
surface_downwelling_longwave_flux_in_air
alias: surface_downwelling_longwave_flux
The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_longwave_flux_in_air_assuming_clear_skyThe surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photon_flux_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photon_flux_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_photon_flux_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_photon_radiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles.
surface_downwelling_photon_radiance_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_photon_radiance_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A photon flux is specified in terms of numbers of photons expressed in moles. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_photon_spherical_irradiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.
surface_downwelling_photon_spherical_irradiance_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_photon_spherical_irradiance_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_photosynthetic_photon_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photosynthetic_photon_flux_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photosynthetic_photon_radiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Photon radiance is the photon flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles.
surface_downwelling_photosynthetic_photon_spherical_irradiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Photon spherical irradiance is the photon flux incident on unit area of a hemispherical (or "2-pi") collector. A photon flux is specified in terms of numbers of photons expressed in moles.
surface_downwelling_photosynthetic_radiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength.
surface_downwelling_photosynthetic_radiative_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photosynthetic_radiative_flux_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_photosynthetic_spherical_irradiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".
surface_downwelling_radiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
surface_downwelling_radiance_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_radiance_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction from which it is coming must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_radiative_flux_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_radiative_flux_per_unit_wavelength_in_air
alias: surface_downwelling_spectral_radiative_flux_in_air
The surface called "surface" means the lower boundary of the atmosphere. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_radiative_flux_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_radiative_flux_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_downwelling_shortwave_flux_in_air
alias: surface_downwelling_shortwave_flux
The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Surface downwelling shortwave is the sum of direct and diffuse solar radiation incident on the surface, and is sometimes called "global radiation". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_shortwave_flux_in_air_assuming_clear_sky
alias: surface_downwelling_shortwave_flux_assuming_clear_sky
The surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". Surface downwelling shortwave is the sum of direct and diffuse solar radiation incident on the surface, and is sometimes called "global radiation". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_downwelling_spherical_irradiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance".
surface_downwelling_spherical_irradiance_per_unit_wavelength_in_sea_water
alias: surface_downwelling_spectral_spherical_irradiance_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Downwelling radiation is radiation from above. It does not mean "net downward". Spherical irradiance is the radiation incident on unit area of a hemispherical (or "2-pi") collector. It is sometimes called "scalar irradiance". The direction (up/downwelling) is specified. Radiation incident on a 4-pi collector has standard names of "omnidirectional spherical irradiance". A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_drag_coefficient_for_heat_in_air
alias: atmosphere_surface_drag_coefficient_of_heat
The surface called "surface" means the lower boundary of the atmosphere.
surface_drag_coefficient_for_momentum_in_air
alias: atmosphere_surface_drag_coefficient_of_momentum
The surface called "surface" means the lower boundary of the atmosphere.
surface_drag_coefficient_in_air
alias: atmosphere_surface_drag_coefficient
The surface called "surface" means the lower boundary of the atmosphere.
surface_eastward_sea_water_velocityThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward).
surface_frozen_carbon_dioxide_amount"Amount" means mass per unit area. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. Frozen carbon dioxide is found on the surface of Mars.
surface_geopotentialThe surface called "surface" means the lower boundary of the atmosphere. Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy.
surface_geostrophic_eastward_sea_water_velocity
alias: surface_eastward_geostrophic_sea_water_velocity
The surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Geostrophic" indicates that geostrophic balance is assumed. "Water" means water in all phases. surface_geostrophic_eastward_sea_water_velocity is the sum of a variable part, surface_geostrophic_eastward_sea_water_velocity_assuming_sea_level_for_geoid, and a constant part due to the stationary component of ocean circulation.
surface_geostrophic_eastward_sea_water_velocity_assuming_sea_level_for_geoid
alias: surface_eastward_geostrophic_sea_water_velocity_assuming_sea_level_for_geoid
The surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Geostrophic" indicates that geostrophic balance is assumed. "Water" means water in all phases. "sea_level" means mean sea level. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. surface_geostrophic_eastward_sea_water_velocity_assuming_sea_level_for_geoid is the variable part of surface_geostrophic_eastward_sea_water_velocity. The assumption that sea level is equal to the geoid means that the stationary component of ocean circulation is equal to zero.
surface_geostrophic_northward_sea_water_velocity
alias: surface_northward_geostrophic_sea_water_velocity
The surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Geostrophic" indicates that geostrophic balance is assumed. "Water" means water in all phases. surface_geostrophic_northward_sea_water_velocity is the sum of a variable part, surface_geostrophic_northward_sea_water_velocity_assuming_sea_level_for_geoid, and a constant part due to the stationary component of ocean circulation.
surface_geostrophic_northward_sea_water_velocity_assuming_sea_level_for_geoid
alias: surface_northward_geostrophic_sea_water_velocity_assuming_sea_level_for_geoid
The surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Geostrophic" indicates that geostrophic balance is assumed. "Water" means water in all phases. "sea_level" means mean sea level. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. surface_geostrophic_northward_sea_water_velocity_assuming_sea_level_for_geoid is the variable part of surface_geostrophic_northward_sea_water_velocity. The assumption that sea level is equal to the geoid means that the stationary component of ocean circulation is equal to zero.
surface_geostrophic_sea_water_x_velocityThe surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Geostrophic" indicates that geostrophic balance is assumed. surface_geostrophic_sea_water_x_velocity is the sum of a variable part, surface_geostrophic_sea_water_x_velocity_assuming_sea_level_for_geoid, and a constant part due to the stationary component of ocean circulation.
surface_geostrophic_sea_water_x_velocity_assuming_sea_level_for_geoidThe surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. "Geostrophic" indicates that geostrophic balance is assumed. "sea_level" means mean sea level. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. surface_geostrophic_sea_water_x_velocity_assuming_sea_level_for_geoid is the variable part of surface_geostrophic_sea_water_x_velocity. The assumption that sea level is equal to the geoid means that the stationary component of ocean circulation is equal to zero.
surface_geostrophic_sea_water_y_velocityThe surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Geostrophic" indicates that geostrophic balance is assumed. surface_geostrophic_sea_water_y_velocity is the sum of a variable part, surface_geostrophic_sea_water_y_velocity_assuming_sea_level_for_geoid, and a constant part due to the stationary component of ocean circulation.
surface_geostrophic_sea_water_y_velocity_assuming_sea_level_for_geoidThe surface called "surface" means the lower boundary of the atmosphere. A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. "Geostrophic" indicates that geostrophic balance is assumed. "sea_level" means mean sea level. The geoid is a surface of constant geopotential with which mean sea level would coincide if the ocean were at rest. surface_geostrophic_sea_water_y_velocity_assuming_sea_level_for_geoid is the variable part of surface_geostrophic_sea_water_y_velocity. The assumption that sea level is equal to the geoid means that the stationary component of ocean circulation is equal to zero.
surface_litter_carbon_content"Content" indicates a quantity per unit area. "Litter carbon" is dead plant material in or above the soil quantified as the mass of carbon which it contains. The surface called "surface" means the lower boundary of the atmosphere.
surface_longwave_emissivityEmissivity is the ratio of the power emitted by an object to the power that would be emitted by a perfect black body having the same temperature as the object. The emissivity is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength or radiation_frequency is included to specify either the wavelength or frequency. The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation.
surface_microwave_emissivityEmissivity is the ratio of the power emitted by an object to the power that would be emitted by a perfect black body having the same temperature as the object. The emissivity is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength or radiation_frequency is included to specify either the wavelength or frequency. The surface called "surface" means the lower boundary of the atmosphere.
surface_molecular_oxygen_partial_pressure_difference_between_sea_water_and_airThe partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume. The surface called "surface" means the lower boundary of the atmosphere.
surface_net_downward_longwave_fluxThe surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_downward_longwave_flux_assuming_clear_skyThe surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_downward_mass_flux_of_ammonia_due_to_bidirectional_surface_exchange"Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward mass flux is the difference between downward_mass_flux and upward_mass_flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Bidirectional surface exchange" is the exchange of a chemical species between the atmosphere and biosphere as simulated by bidirectional surface flux models. It refers to exchange through stomata and soil surfaces and is the net result of emission and dry deposition. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for ammonia is NH3.
surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes"Downward" indicates a vector component which is positive when directed downward (negative upward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "All land processes" means plant and soil respiration, photosynthesis, animal grazing, crop harvesting, natural fires and anthropogenic land use change. "Anthropogenic land use change" means human changes to land, excluding forest regrowth. It includes fires ignited by humans for the purpose of land use change and the processes of eventual disposal and decomposition of wood products such as paper, cardboard, furniture and timber for construction. The quantity with standard name surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes is equal to the difference between the quantities with standard names surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change and surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The chemical formula for carbon dioxide is CO2.
surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change"Downward" indicates a vector component which is positive when directed downward (negative upward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "All land processes" means plant and soil respiration, photosynthesis, animal grazing, crop harvesting, natural fires and anthropogenic land use change. "Anthropogenic land use change" means human changes to land, excluding forest regrowth. It includes fires ignited by humans for the purpose of land use change and the processes of eventual disposal and decomposition of wood products such as paper, cardboard, furniture and timber for construction. The quantity with standard name surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes is equal to the difference between the quantities with standard names surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change and surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The chemical formula for carbon dioxide is CO2.
surface_net_downward_radiative_flux
alias: surface_net_downward_radiative_flux_where_land
The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
surface_net_downward_shortwave_fluxThe surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_downward_shortwave_flux_assuming_clear_skyThe surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_upward_longwave_fluxThe surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change"Upward" indicates a vector component which is positive when directed upward (negative downward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Anthropogenic land use change" means human changes to land, excluding forest regrowth. It includes fires ignited by humans for the purpose of land use change and the processes of eventual disposal and decomposition of wood products such as paper, cardboard, furniture and timber for construction. The quantity with standard name surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes is equal to the difference between the quantities with standard names surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change and surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2.
surface_net_upward_radiative_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_net_upward_shortwave_fluxThe surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_northward_sea_water_velocityThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. A velocity is a vector quantity. "Northward" indicates a vector component which is positive when directed northward (negative southward).
surface_partial_pressure_of_carbon_dioxide_in_airThe surface called "surface" means the lower boundary of the atmosphere. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.
surface_partial_pressure_of_carbon_dioxide_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. The partial pressure of a dissolved gas in sea water is the partial pressure in air with which it would be in equilibrium. The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.
surface_ratio_of_upwelling_radiance_emerging_from_sea_water_to_downwelling_radiative_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. "ratio_of_X_to_Y" means X/Y. Upwelling radiation is radiation from below. It does not mean "net upward". Downwelling radiation is radiation from above. It does not mean "net downward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of angle_of_emergence. Radiative flux is the sum of shortwave and longwave radiative fluxes. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In relation to satellite ocean color products the quantity named surface_ratio_of_upwelling_radiance_emerging_from_sea_water_to_downwelling_radiative_flux_in_air is sometimes called "remote sensing reflectance" and has a bidirectional dependence. The direction of the downwelling flux can be specified using a coordinate with the standard name angle_of_incidence.
surface_roughness_lengthThe surface called "surface" means the lower boundary of the atmosphere.
surface_roughness_length_for_heat_in_airThe surface called "surface" means the lower boundary of the atmosphere.
surface_roughness_length_for_momentum_in_airThe surface called "surface" means the lower boundary of the atmosphere.
surface_runoff_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage.
surface_runoff_fluxThe surface called "surface" means the lower boundary of the atmosphere. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.
surface_snow_and_ice_melt_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. "Surface snow and ice melt flux" means the mass flux of all melting at the surface.
surface_snow_and_ice_melt_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. The snow and ice melt heat flux is the supply of latent heat which is melting snow and ice at freezing point. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_and_ice_refreezing_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. "Surface snow and ice refreezing flux" means the mass flux of surface meltwater which refreezes within the snow or firn.
surface_snow_and_ice_sublimation_fluxThe surface called "surface" means the lower boundary of the atmosphere. Sublimation is the conversion of solid into vapor. The snow and ice sublimation flux is the loss of snow and ice mass resulting from their conversion to water vapor. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_area_fractionThe surface called "surface" means the lower boundary of the atmosphere. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.
surface_snow_binary_maskX"_binary_mask" has 1 where condition X is met, 0 elsewhere. The value is 1 where the snow cover area fraction is greater than a threshold, and 0 elsewhere. The threshold must be specified by associating a coordinate variable or scalar coordinate variable with the data variable and giving the coordinate variable a standard name of surface_snow_area_fraction. The values of the coordinate variable are the threshold values for the corresponding subarrays of the data variable.
surface_snow_melt_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area.
surface_snow_melt_and_sublimation_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. Sublimation is the conversion of solid into vapor. The snow melt and sublimation heat flux is the supply of latent heat which converting snow to liquid water (melting) and water vapor (sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_melt_fluxThe surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_melt_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. The snow melt heat flux is the supply of latent heat which is melting snow at freezing point. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_sublimation_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. Sublimation is the conversion of solid into vapor.
surface_snow_sublimation_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. Sublimation is the conversion of solid into vapor. The snow sublimation heat flux is the supply of latent heat which is causing evaporation of snow to water vapor. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_snow_thickness
alias: surface_snow_thickness_where_sea_ice
The surface called "surface" means the lower boundary of the atmosphere. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
surface_specific_humidityThe surface called "surface" means the lower boundary of the atmosphere. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
surface_temperature
alias: surface_temperature_where_land
alias: surface_temperature_where_open_sea
alias: surface_temperature_where_snow
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the temperature at the interface, not the bulk temperature of the medium above or below. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
surface_temperature_anomalyThe surface called "surface" means the lower boundary of the atmosphere. "anomaly" means difference from climatology. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below.
surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_growth"Upward" indicates a vector component which is positive when directed upward (negative downward). Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e."producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
surface_upward_carbon_mass_flux_due_to_plant_respiration_for_biomass_maintenance"Upward" indicates a vector component which is positive when directed upward (negative downward). Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e."producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
surface_upward_heat_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The vertical heat flux in air is the sum of all heat fluxes i.e. radiative, latent and sensible. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upward_latent_heat_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upward_mass_flux_of_ammoniaUpward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for ammonia is NH3.
surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_crop_harvesting"Upward" indicates a vector component which is positive when directed upward (negative downward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2.
surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fires_excluding_anthropogenic_land_use_change"Upward" indicates a vector component which is positive when directed upward (negative downward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Fires excluding anthropogenic land use change" means all natural fires and human ignited fires that are not associated with change of land use. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2. "Anthropogenic" means influenced, caused, or created by human activity.
surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_grazing"Upward" indicates a vector component which is positive when directed upward (negative downward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2.
surface_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_natural_sources"Upward" indicates a vector component which is positive when directed upward (negative downward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2.
surface_upward_mole_flux_of_carbon_dioxide
alias: surface_carbon_dioxide_mole_flux
"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The chemical formula for carbon dioxide is CO2. The standard name surface_downward_mole_flux_of_carbon_dioxide should be used to label data in which the flux is positive when directed downward. The standard name "surface_carbon_dioxide_mole_flux" is deprecated because it does not specify in which direction the flux is positive. Any data having the standard name "surface_carbon_dioxide_mole_flux" should be examined carefully to determine which sign convention was used.
surface_upward_mole_flux_of_dimethyl_sulfide"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. Thechemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referredto as DMS.
surface_upward_sensible_heat_flux
alias: surface_upward_sensible_heat_flux_where_sea
The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
surface_upward_water_fluxThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface water flux is the result of precipitation and evaporation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upward_water_vapor_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upwelling_longwave_flux_in_air
alias: surface_upwelling_longwave_flux
The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upwelling_longwave_flux_in_air_assuming_clear_sky
alias: surface_upwelling_longwave_flux_assuming_clear_sky
The surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upwelling_photosynthetic_photon_flux_in_airThe surface called "surface" means the lower boundary of the atmosphere. Upwelling radiation is radiation from below. It does not mean "net upward". "Photosynthetic" radiation is the part of the spectrum which is used in photosynthesis e.g. 300-700 nm. The range of wavelengths could be specified precisely by the bounds of a coordinate of radiation_wavelength. A photon flux is specified in terms of numbers of photons expressed in moles. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upwelling_radiance_in_airThe surface called "surface" means the lower boundary of the atmosphere. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
surface_upwelling_radiance_in_air_emerging_from_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
surface_upwelling_radiance_in_air_reflected_by_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
surface_upwelling_radiance_in_sea_waterThe surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
surface_upwelling_radiance_per_unit_wavelength_in_air
alias: surface_upwelling_spectral_radiance_in_air
The surface called "surface" means the lower boundary of the atmosphere. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_radiance_per_unit_wavelength_in_air_emerging_from_sea_water
alias: surface_upwelling_spectral_radiance_in_air_emerging_from_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_radiance_per_unit_wavelength_in_air_reflected_by_sea_water
alias: surface_upwelling_spectral_radiance_in_air_reflected_by_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_radiance_per_unit_wavelength_in_sea_water
alias: surface_upwelling_spectral_radiance_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_radiative_flux_per_unit_wavelength_in_air
alias: surface_upwelling_spectral_radiative_flux_in_air
The surface called "surface" means the lower boundary of the atmosphere. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_radiative_flux_per_unit_wavelength_in_sea_water
alias: surface_upwelling_spectral_radiative_flux_in_sea_water
The surface called "surface" means the lower boundary of the atmosphere. "Water" means water in all phases, including frozen i.e. ice and snow. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
surface_upwelling_shortwave_flux_in_air
alias: surface_upwelling_shortwave_flux
The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_upwelling_shortwave_flux_in_air_assuming_clear_sky
alias: surface_upwelling_shortwave_flux_assuming_clear_sky
The surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
surface_water_amountThe surface called "surface" means the lower boundary of the atmosphere. "Amount" means mass per unit area. "Water" means water in all phases, including frozen i.e. ice and snow. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.
temperature_difference_between_ambient_air_and_air_lifted_adiabaticallyThis quantity is defined as the temperature difference between a parcel of air lifted adiabatically from a starting air pressure to a finishing air pressure in the troposphere and the ambient air temperature at the finishing air pressure in the troposphere. It is
often called the lifted index (LI) and provides a measure of the instability of the atmosphere. The air parcel is "lifted" by moving the air parcel from the starting air pressure to the Lifting Condensation Level (dry adiabatically) and then from the Lifting Condensation Level to the finishing air pressure (wet adiabatically). Air temperature is
the bulk temperature of the air. Coordinate variables of original_air_pressure_of_lifted_parcel and
final_air_pressure_of_lifted_parcel should be specified to indicate the specific air pressures at which the parcel lifting starts (starting air pressure) and the temperature difference is calculated at (finishing air pressure), respectively.
temperature_difference_between_ambient_air_and_air_lifted_adiabatically_from_the_surfaceThis quantity is defined as the temperature difference between a parcel of air lifted adiabatically from the surface to a finishing air pressure in the troposphere and the ambient air temperature at the finishing air pressure in the troposphere. It is often called the lifted index (LI) and provides a measure of the instability of the atmosphere. The air parcel is "lifted" by moving the air parcel from the surface to the Lifting Condensation Level (dry adiabatically) and then from the Lifting Condensation Level to the finishing air pressure (wet adiabatically). Air temperature is the bulk temperature of the air, not the surface (skin) temperature. The term "surface" means the lower boundary of the atmosphere. A coordinate variable of final_air_pressure_of_lifted_parcel should be specified to indicate the specific air pressure that the temperature difference is calculated at.
temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_waterEvaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) The quantity with standard name temperature_flux_due_to_evaporation_expressed_as_heat_flux_out_of_sea_water is the heat energy carried by the transfer of water away from the liquid ocean through the process of evaporation. It is distinct from the transfer of latent heat and is calculated relative to the heat that would be transported by water evaporating at zero degrees Celsius. It is calculated as the product QevapCpTevap, where Qevap is the mass flux of evaporating water (kg m-2 s-1), Cp is the specific heat capacity of water and Tevap is the temperature in degrees Celsius of the evaporating water. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_waterThe quantity with standard name temperature_flux_due_to_rainfall_expressed_as_heat_flux_into_sea_water is the heat energy carried by rainfall entering the sea at the sea surface. It is calculated relative to the heat that would be carried by rainfall entering the sea at zero degrees Celsius. It is calculated as the product QrainCpTrain, where Qrain is the mass flux of rainfall entering the sea (kg m-2 s-1), Cp is the specific heat capacity of water and Train is the temperature in degrees Celsius of the rain water entering the sea surface. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_waterRunoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. The quantity with standard name temperature_flux_due_to_runoff_expressed_as_heat_flux_into_sea_water is the heat carried by the transfer of water into the liquid ocean by the process of runoff. This quantity additonally includes melt water from sea ice and icebergs. It is calculated relative to the heat that would be transported by runoff water entering the sea at zero degrees Celsius. It is calculated as the product QrunoffCpTrunoff, where Q runoff is the mass flux of liquid runoff entering the sea water (kg m-2 s-1), Cp is the specific heat capacity of water, and Trunoff is the temperature in degrees Celsius of the runoff water. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
temperature_in_surface_snow
alias: snow_temperature
"Temperature in surface snow" is the bulk temperature of the snow, not the surface (skin) temperature. The surface called "surface" means the lower boundary of the atmosphere.
temperature_of_sensor_for_oxygen_in_sea_waterTemperature_of_sensor_for_oxygen_in_sea_water is the instrument temperature used in calculating the concentration of oxygen in sea water; it is not a measurement of the ambient water temperature.
tendency_of_air_density"tendency_of_X" means derivative of X with respect to time.
tendency_of_air_pressure"tendency_of_X" means derivative of X with respect to time.
tendency_of_air_temperature"tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_convectionAir temperature is the bulk temperature of the air, not the surface (skin) temperature. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_air_temperature_due_to_diabatic_processesThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_dry_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_longwave_heatingThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "longwave" means longwave radiation. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_longwave_heating_assuming_clear_skyThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "tendency_of_X" means derivative of X with respect to time. "longwave" means longwave radiation. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_model_physicsAir temperature is the bulk temperature of the air, not the surface (skin) temperature. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_air_temperature_due_to_moist_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_radiative_heating"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Wet deposition" means deposition by precipitation. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
tendency_of_air_temperature_due_to_shortwave_heatingThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "shortwave" means shortwave radiation. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_shortwave_heating_assuming_clear_skyThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "tendency_of_X" means derivative of X with respect to time. "shortwave" means shortwave radiation. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_air_temperature_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixingAir temperature is the bulk temperature of the air, not the surface (skin) temperature. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_air_temperature_due_to_stratiform_precipitation
alias: tendency_of_air_temperature_due_to_large_scale_precipitation
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_air_temperature_due_to_turbulenceThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature.
tendency_of_atmosphere_dry_energy_content"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
tendency_of_atmosphere_enthalpy_content_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
tendency_of_atmosphere_kinetic_energy_content_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used.
tendency_of_atmosphere_mass_content_of_acetaldehyde_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for acetaldehyde is CH3CHO. The IUPAC name for acetaldehyde is ethanal.
tendency_of_atmosphere_mass_content_of_acetaldehyde_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. The chemical formula for acetaldehyde is CH3CHO. The IUPAC name for acetaldehyde is ethanal.
tendency_of_atmosphere_mass_content_of_acetaldehyde_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for acetaldehyde is CH3CHO. The IUPAC name for acetaldehyde is ethanal.
tendency_of_atmosphere_mass_content_of_acetic_acid_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
tendency_of_atmosphere_mass_content_of_acetic_acid_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Wet deposition" means deposition by precipitation. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
tendency_of_atmosphere_mass_content_of_acetone_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Acetone is an organic molecule with the chemical formula CH3CH3CO. The IUPAC name for acetone is propan-2-one. Acetone is a member of the group of organic compounds known as ketones. There are standard names for the ketone group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_aceto_nitrile_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_alcohols_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Alcohols include all organic compounds with an alcoholic (OH) group. In standard names "alcohols" is the term used to describe the group of chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_aldehydes_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. Aldehydes are organic compounds with a CHO group; "aldehydes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aldehyde species, e.g., formaldehyde and acetyladehyde.
tendency_of_atmosphere_mass_content_of_aldehydes_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. Aldehydes are organic compounds with a CHO group; "aldehydes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aldehyde species, e.g., formaldehyde and acetyladehyde.
tendency_of_atmosphere_mass_content_of_alkanes_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Alkanes are saturated hydrocarbons, i.e. they do not contain any chemical double bonds. "Hydrocarbon" means a compound containing hydrogen and carbon. Alkanes contain only hydrogen and carbon combined in the general proportions C(n)H(2n+2); "alkanes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkane species, e.g., methane and ethane.
tendency_of_atmosphere_mass_content_of_alkenes_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Alkenes are unsaturated hydrocarbons as they contain chemical double bonds between adjacent carbon atoms. "Hydrocarbon" means a compound containing hydrogen and carbon. Alkenes contain only hydrogen and carbon combined in the general proportions C(n)H(2n); "alkenes" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual alkene species, e.g., ethene and propene.
tendency_of_atmosphere_mass_content_of_alpha_hexachlorocyclohexane_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_alpha_hexachlorocyclohexane_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_alpha_hexachlorocyclohexane_due_to_re_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Re-emission" refers to emission that is not from a primary source; it refers to emission of a species that has previously been deposited and accumulated in soils or water. "Re-emission" is a process entirely distinct from "emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_alpha_hexachlorocyclohexane_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_alpha_pinene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
tendency_of_atmosphere_mass_content_of_ammonia_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. he chemical formula for ammonia is NH3. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ammonia is NH3. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ammonia_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for ammonium is NH4.
tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_ammonium_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for ammonium is NH4.
tendency_of_atmosphere_mass_content_of_aromatic_compounds_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Aromatic compounds in organic chemistry are compounds that contain at least one benzene ring of six carbon atoms joined by alternating single and double covalent bonds. The simplest aromatic compound is benzene itself. In standard names "aromatic_compounds" is the term used to describe the group of aromatic chemical species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual aromatic species, e.g. benzene and xylene.
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_benzene_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_beta_pinene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
tendency_of_atmosphere_mass_content_of_biogenic_nmvoc_expressed_as_carbon_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Biogenic" means influenced, caused, or created by natural processes. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_butane_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_butane_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_dioxide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2.
tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_anthropogenic_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2. "Anthropogenic" means influenced, caused, or created by human activity. Anthropogenic emission of carbon dioxide includes fossil fuel use, cement production, agricultural burning and sources associated with anthropogenic land use change, except forest regrowth.
tendency_of_atmosphere_mass_content_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_fossil_fuel_combustion"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon dioxide is CO2. Fossil fuel combustion includes cement production and flaring of natural gas.
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula of carbon monoxide is CO.
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon monoxide is CO. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for carbon monoxide is CO. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_monoxide_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon monoxide is CO. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_carbon_tetrachloride_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of carbon tetrachloride is CCl4.
tendency_of_atmosphere_mass_content_of_cfc113a_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
tendency_of_atmosphere_mass_content_of_cfc113_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
tendency_of_atmosphere_mass_content_of_cfc114_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of CFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
tendency_of_atmosphere_mass_content_of_cfc115_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
tendency_of_atmosphere_mass_content_of_cfc11_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula of CFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
tendency_of_atmosphere_mass_content_of_cfc12_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
tendency_of_atmosphere_mass_content_of_chlorinated_hydrocarbons_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chlorinated hydrocarbons are a group of chemicals composed of carbon, chlorine and hydrogen. As pesticides, they are also referred to by several other names, including chlorinated organics, chlorinated insecticides and chlorinated synthetics. In standard names "chlorinated_hydrocarbons" is the term used to describe the group of chlorinated hydrocarbon species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_chlorinated_hydrocarbons_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chlorinated hydrocarbons are a group of chemicals composed of carbon, chlorine and hydrogen. As pesticides, they are also referred to by several other names, including chlorinated organics, chlorinated insecticides and chlorinated synthetics. In standard names "chlorinated_hydrocarbons" is the term used to describe the group of chlorinated hydrocarbon species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_chlorinated_hydrocarbons_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chlorinated hydrocarbons are a group of chemicals composed of carbon, chlorine and hydrogen. As pesticides, they are also referred to by several other names, including chlorinated organics, chlorinated insecticides and chlorinated synthetics. In standard names "chlorinated_hydrocarbons" is the term used to describe the group of chlorinated hydrocarbon species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_chlorinated_hydrocarbons_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chlorinated hydrocarbons are a group of chemicals composed of carbon, chlorine and hydrogen. As pesticides, they are also referred to by several other names, including chlorinated organics, chlorinated insecticides and chlorinated synthetics. In standard names "chlorinated_hydrocarbons" is the term used to describe the group of chlorinated hydrocarbon species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_chlorinated_hydrocarbons_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chlorinated hydrocarbons are a group of chemicals composed of carbon, chlorine and hydrogen. As pesticides, they are also referred to by several other names, including chlorinated organics, chlorinated insecticides and chlorinated synthetics. In standard names "chlorinated_hydrocarbons" is the term used to describe the group of chlorinated hydrocarbon species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_emission
alias: tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_due_to_emission
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_due_to_gravitational_settling
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_due_to_turbulent_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_dust_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_agricultural_waste_burning
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_agricultural_waste_burning
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol partilces" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_energy_production_and_distribution
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_energy_production_and_distribution
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_forest_fires
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_forest_fires
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_industrial_processes_and_combustion
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_industrial_processes_and_combustion
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_land_transport
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_land_transport
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_maritime_transport
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_maritime_transport
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_residential_and_commercial_combustion
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_residential_and_commercial_combustion
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The mass is the total mass of the particles. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_savanna_and_grassland_fires
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_savanna_and_grassland_fires
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_emission_from_waste_treatment_and_disposal
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_emission_from_waste_treatment_and_disposal
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_gravitational_settling
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. The sum of turbulent deposition and gravitational settling is dry deposition. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_turbulent_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the molecules. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_elemental_carbon_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_black_carbon_dry_aerosol_due_to_wet_deposition
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_atmosphere_mass_content_of_esters_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Esters in organic chemistry are chemical compounds derived by reacting an oxoacid with a hydroxyl compound such as an alcohol or phenol. Esters are usually derived from an inorganic acid or organic acid in which at least one -OH (hydroxyl) group is replaced by an -O-alkyl (alkoxy) group, and most commonly from carboxylic acids and alcohols. That is, esters are formed by condensing an acid with an alcohol. In standard names "esters" is the term used to describe the group of ester species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_esters_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Esters in organic chemistry are chemical compounds derived by reacting an oxoacid with a hydroxyl compound such as an alcohol or phenol. Esters are usually derived from an inorganic acid or organic acid in which at least one -OH (hydroxyl) group is replaced by an -O-alkyl (alkoxy) group, and most commonly from carboxylic acids and alcohols. That is, esters are formed by condensing an acid with an alcohol. In standard names "esters" is the term used to describe the group of ester species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_esters_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Esters in organic chemistry are chemical compounds derived by reacting an oxoacid with a hydroxyl compound such as an alcohol or phenol. Esters are usually derived from an inorganic acid or organic acid in which at least one -OH (hydroxyl) group is replaced by an -O-alkyl (alkoxy) group, and most commonly from carboxylic acids and alcohols. That is, esters are formed by condensing an acid with an alcohol. In standard names "esters" is the term used to describe the group of ester species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethane_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethanol_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethanol is C2H5OH.
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethene_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethers_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Ethers are a class of organic compounds that contain an ether group - an oxygen atom connected to two alkyl or aryl groups - of general formula R-O-R. In standard names "ethers" is the term used to describe the group of ether species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ethyne_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_formaldehyde_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
tendency_of_atmosphere_mass_content_of_formic_acid_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
tendency_of_atmosphere_mass_content_of_formic_acid_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Wet deposition" means deposition by precipitation. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
tendency_of_atmosphere_mass_content_of_gaseous_divalent_mercury_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_gaseous_divalent_mercury_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_gaseous_divalent_mercury_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_gaseous_elemental_mercury_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_gaseous_elemental_mercury_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_gaseous_elemental_mercury_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_halon1202_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
tendency_of_atmosphere_mass_content_of_halon1211_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
tendency_of_atmosphere_mass_content_of_halon1301_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
tendency_of_atmosphere_mass_content_of_halon2402_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
tendency_of_atmosphere_mass_content_of_hcc140a_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
tendency_of_atmosphere_mass_content_of_hcfc141b_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
tendency_of_atmosphere_mass_content_of_hcfc142b_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
tendency_of_atmosphere_mass_content_of_hcfc22_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
tendency_of_atmosphere_mass_content_of_hexachlorobiphenyl_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_hexachlorobiphenyl_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_hexachlorobiphenyl_due_to_re_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Re-emission" refers to emission that is not from a primary source; it refers to emission of a species that has previously been deposited and accumulated in soils or water. "Re-emission" is a process entirely distinct from "emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_hexachlorobiphenyl_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_hydrogen_cyanide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for hydrogen cyanide is HCN.
tendency_of_atmosphere_mass_content_of_hydrogen_cyanide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for hydrogen cyanide is HCN.
tendency_of_atmosphere_mass_content_of_hydrogen_peroxide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for hydrogen peroxide is H2O2.
tendency_of_atmosphere_mass_content_of_hydrogen_peroxide_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for hydrogen peroxide is H2O2.
tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_isoprene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_ketones_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. In organic chemistry, a ketone is a compound with the structure RC(=O)R', where R and R' can be a variety of atoms and groups of atoms. It features a carbonyl group (C=O) bonded to two other carbon atoms. Acetone is the simplest example of a ketone. In standard names "ketones" is the term used to describe the group of ketone species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_limonene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_mercury_dry_aerosol_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_mercury_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_mercury_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_mercury_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_mercury_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_methane_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. he chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methane_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_methanesulfonic_acid_dry_aerosol_particles_due_to_net_chemical_productionContent" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Net chemical production" means the net result of all chemical reactions within the atmosphere that produce or destroy a particular species. "tendency_of_X" means derivative of X with respect to time. The chemical formula for methanesulfonic acid is CH3SO3H.
tendency_of_atmosphere_mass_content_of_methanesulfonic_acid_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for methanesulfonic acid is CH3SO3H.
tendency_of_atmosphere_mass_content_of_methanesulfonic_acid_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for methanesulfonic acid is CH3SO3H.
tendency_of_atmosphere_mass_content_of_methanol_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methanol is CH3OH.
tendency_of_atmosphere_mass_content_of_methyl_bromide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
tendency_of_atmosphere_mass_content_of_methyl_chloride_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
tendency_of_atmosphere_mass_content_of_molecular_hydrogen_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for molecular hydrogen is H2.
tendency_of_atmosphere_mass_content_of_molecular_hydrogen_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for molecular hydrogen is H2.
tendency_of_atmosphere_mass_content_of_molecular_hydrogen_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for molecular hydrogen is H2. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_molecular_hydrogen_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for molecular hydrogen is H2. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_monoterpenes_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Monoterpenes are a class of terpenes that consist of two isoprene units and have the molecular formula C10H16. Terpenes are hydrocarbons. The term "monoterpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_nitrate_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_nitrate_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the nitrate anion is NO3-.
tendency_of_atmosphere_mass_content_of_nitrate_dry_aerosol_particles_due_to_net_chemical_production"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Net chemical production" means the net result of all chemical reactions within the atmosphere that produce or destroy a particular species. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the nitrate anion is NO3-.
tendency_of_atmosphere_mass_content_of_nitrate_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the nitrate anion is NO3-.
tendency_of_atmosphere_mass_content_of_nitric_acid_due_to_dry_depositionquot;Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_nitric_acid_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_nitrogen_dioxide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_nitrogen_dioxide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen dioxide is NO2.
tendency_of_atmosphere_mass_content_of_nitrogen_dioxide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen dioxide is NO2. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_dioxide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen dioxide is NO2. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO.
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrogen_monoxide_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nitrous_acid_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for nitrous acid is HNO2.
tendency_of_atmosphere_mass_content_of_nitrous_acid_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrous acid is HNO2.
tendency_of_atmosphere_mass_content_of_nitrous_acid_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for nitrous acid is HNO2.
tendency_of_atmosphere_mass_content_of_nitrous_oxide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for nitrous oxide is N2O.
tendency_of_atmosphere_mass_content_of_nitrous_oxide_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrous oxide is N2O.
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nmvoc_expressed_as_carbon_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. "nmvoc" means non methane volatile organic compounds. "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Nox" means nitric oxide (NO) and nitrogen dioxide (NO2). "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_soil"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. The chemical formula for nitrogen monoxide is NO. "Nox" means a combination of two radical species containing nitrogen and oxygen NO+NO2.
tendency_of_atmosphere_mass_content_of_nox_expressed_as_nitrogen_monoxide_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "tendency_of_X" means derivative of X with respect to time. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2), chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_noy_expressed_as_nitrogen_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2), chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_organic_acids_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. An organic acid is an organic compound with acidic properties. The most common organic acids are the carboxylic acids, whose acidity is associated with their carboxyl group -COOH. In standard names "organic_acids" is the term used to describe the group of organic acid species that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_organic_nitrates_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. "tendency_of_X" means derivative of X with respect to time. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. Organic nitrates are nitrogen-containing compounds having the general formula RONO2, where R is an alkyl (or organic) group; "organic nitrates" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_organic_nitrates_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. Organic nitrates are nitrogen-containing compounds having the general formula RONO2, where R is an alkyl (or organic) group; "organic_nitrates" is the term used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_organic_peroxides_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. Organic peroxides are organic molecules containing an oxygen-oxygen bond. The general chemical formula is ROOR or ROOH, where R is an organic group.
tendency_of_atmosphere_mass_content_of_organic_peroxides_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. Organic peroxides are organic molecules containing an oxygen-oxygen bond. The general chemical formula is ROOR or ROOH, where R is an organic group.
tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_ozone_due_to_dry_deposition_into_stomata"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition"is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_gravitational_settling
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production_and_emission
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_net_chemical_production_and_emission
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_net_production_and_emission
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Net chemical production" means the net result of all chemical reactions within the atmosphere that produce or destroy a particular species. "tendency_of_X" means derivative of X with respect to time. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_turbulent_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol.The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_agricultural_waste_burning
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_agricultural_waste_burning
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_energy_production_and_distribution
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_energy_production_and_distribution
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_forest_fires
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_forest_fires
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_industrial_processes_and_combustion
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_industrial_processes_and_combustion
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_land_transport
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_land_transport
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_maritime_transport
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_maritime_transport
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_residential_and_commercial_combustion
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_residential_and_commercial_combustion
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_savanna_and_grassland_fires
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_savanna_and_grassland_fires
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_emission_from_waste_treatment_and_disposal
alias: tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_expressed_as_carbon_due_to_emission_from_waste_treatment_and_disposal
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The "waste treatment and disposal" sector comprises solid waste disposal on land, waste water handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_particulate_organic_matter_dry_aerosol_particles_expressed_as_carbon_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The term "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except elemental carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for pentane is C5H12. Pentane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_pentane_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_peroxyacetyl_nitrate_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
tendency_of_atmosphere_mass_content_of_peroxynitric_acid_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
tendency_of_atmosphere_mass_content_of_pm10_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_dust_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_dust_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_dust_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_seasalt_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_seasalt_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm10_seasalt_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm10 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 10 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dust_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dust_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_dust_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_seasalt_dry_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_seasalt_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_pm2p5_seasalt_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Pm2p5 aerosol" is an air pollutant with an aerodynamic diameter of less than or equal to 2.5 micrometers. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_due_to_dry_deposition
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling.
tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_particles_due_to_emission
alias: tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_due_to_emission
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol."Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_primary_particulate_organic_matter_dry_aerosol_due_to_wet_deposition
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except elemental carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_propane_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propane_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_propene_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_radon_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical symbol for radon is Rn.
tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_emission
alias: tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_due_to_emission
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_due_to_gravitational_settling
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_due_to_turbulent_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_seasalt_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter" means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_net_chemical_production
alias: tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_due_to_net_chemical_production
alias: tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_due_to_net_production
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter" means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Net chemical production" means the net result of all chemical reactions within the atmosphere that produce or destroy a particular species. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_particles_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_secondary_particulate_organic_matter_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "Secondary particulate organic matter" means particulate organic matter formed within the atmosphere from gaseous precursors. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_mass_content_of_sesquiterpenes_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. Terpenes are hydrocarbons, that is, they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. Sesquiterpenes are a class of terpenes that consist of three isoprene units and have the molecular formula C15H24. Terpenes are hydrocarbons. The term "sesquiterpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_expressed_as_sulfur_due_to_wet_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_expressed_as_sulfur_dry_aerosol_due_to_wet_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_aqueous_phase_net_chemical_production"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Net chemical production" means the net result of all chemical reactions within the atmosphere that produce or destroy a particular species. "Aqueous phase net chemical production" means the net result of all aqueous chemical processes in fog and clouds that produce or destroy a species, as opposed to chemical processes in the gaseous phase. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_emission
alias: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_due_to_emission
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_gaseous_phase_net_chemical_production"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Gaseous phase net chemical production" means the net result of all gaseous chemical processes in the atmosphere that produce or destroy a species, distinct from chemical processes in the aqueous phase. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the particles. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_expressed_as_sulfur_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_expressed_as_sulfur_due_to_dry_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_expressed_as_sulfur_dry_aerosol_due_to_dry_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_expressed_as_sulfur_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_expressed_as_sulfur_due_to_gravitational_settling
alias: tendency_of_atmosphere_mass_content_of_sulfate_expressed_as_sulfur_dry_aerosol_due_to_gravitational_settling
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_particles_expressed_as_sulfur_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_dry_aerosol_expressed_as_sulfur_due_to_turbulent_deposition
alias: tendency_of_atmosphere_mass_content_of_sulfate_expressed_as_sulfur_dry_aerosol_due_to_turbulent_deposition
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dry deposition" is the sum of turbulent deposition and gravitational settling. The chemical formula for sulfur dioxide is SO2.
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names.
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for sulfur dioxide is SO2. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_sulfur_dioxide_due_to_wet_deposition"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Wet deposition" means deposition by precipitation.
tendency_of_atmosphere_mass_content_of_terpenes_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Terpenes are hydrocarbons, that is, they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. The term "terpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual terpene species, e.g., isoprene and limonene. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_terpenes_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. Terpenes are hydrocarbons, that is, they contain only hydrogen and carbon combined in the general proportions (C5H8)n where n is an integer greater than on equal to one. The term "terpenes" is used in standard names to describe the group of chemical species having this common structure that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names exist for some individual terpene species, e.g., isoprene and limonene. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_toluene_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_trimethylbenzene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for trimethylbenzene is C9H12. The IUPAC names for trimethylbenzene is 1,3,5-trimethylbenzene. Trimethylbenzene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_water_due_to_advection
alias: tendency_of_atmosphere_water_content_due_to_advection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Water" means water in all phases.
tendency_of_atmosphere_mass_content_of_water_vapor
alias: tendency_of_atmosphere_water_vapor_content
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_water_vapor_due_to_advection
alias: tendency_of_atmosphere_water_vapor_content_due_to_advection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_water_vapor_due_to_convection
alias: tendency_of_atmosphere_water_vapor_content_due_to_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_water_vapor_due_to_deep_convection
alias: tendency_of_atmosphere_water_vapor_content_due_to_deep_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_water_vapor_due_to_shallow_convection
alias: tendency_of_atmosphere_water_vapor_content_due_to_shallow_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_water_vapor_due_to_turbulence
alias: tendency_of_atmosphere_water_vapor_content_due_to_turbulence
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_agricultural_production"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "agricultural production" sector comprises the agricultural processes of enteric fermentation, manure management, rice cultivation, agricultural soils and other. It may also include any not-classified or "other" combustion, which is commonly included in agriculture-related inventory data. "Agricultural production" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 4A, 4B, 4C, 4D and 4G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_agricultural_waste_burning"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "agricultural waste burning" sector comprises field burning of agricultural residues. "Agricultural waste burning" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 4F as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_energy_production_and_distribution"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "energy production and distribution" sector comprises fuel combustion activities related to energy industries and fugitive emissions from fuels. It may also include any not-classified or "other" combustion, which is commonly included in energy-related inventory data. "Energy production and distribution" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A1 and 1B as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_forest_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "forest fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in forests. "Forest fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_industrial_processes_and_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "industrial processes and combustion" sector comprises fuel combustion activities related to manufacturing industries and construction, industrial processes related to mineral products, the chemical industry, metal production, the production of pulp, paper, food and drink, and non-energy industry use of lubricants and waxes. It may also include any not-classified or "other" combustion, which is commonly included in industry-related inventory data. "Industrial processes and combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A2, 2A, 2B, 2C, 2D and 2G as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_land_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "land transport" sector includes fuel combustion activities related to road transportation, railways and other transportation. "Land transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A3b, 1A3c and 1A3e as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_maritime_transport"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "maritime transport" sector includes fuel combustion activities related to maritime transport. "Maritime transport" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3d as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_residential_and_commercial_combustion"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "residential and commercial combustion" sector comprises fuel combustion activities related to the commercial/institutional sector, the residential sector and the agriculture/forestry/fishing sector. It may also include any not-classified or "other" combustion, which is commonly included in the inventory data. "Residential and commercial combustion" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 1A4a, 1A4b and 1A4c as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_savanna_and_grassland_fires"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "savanna and grassland fires" sector comprises the burning (natural and human-induced) of living or dead vegetation in non-forested areas. It excludes field burning of agricultural residues. "Savanna and grassland fires" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 5 as defined in the 2006 IPCC guidelines for national greenhouse gas Inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_solvent_production_and_use"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "solvent production and use" sector comprises industrial processes related to the consumption of halocarbons, SF6, solvent and other product use. "Solvent production and use" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 2F and 3 as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_content_of_xylene_due_to_emission_from_waste_treatment_and_disposal"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including "content_of_atmosphere_layer" are used. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species. The "waste treatment and disposal" sector comprises solid waste disposal on land, wastewater handling, waste incineration and other waste disposal. "Waste treatment and disposal" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source categories 6A, 6B, 6C and 6D as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_atmosphere_mass_per_unit_area"tendency_of_X" means derivative of X with respect to time. "X_area" means the horizontal area occupied by X within the grid cell.
tendency_of_atmosphere_mass_per_unit_area_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "X_area" means the horizontal area occupied by X within the grid cell.
tendency_of_atmosphere_mole_concentration_of_methane_due_to_chemical_destructionMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Chemical destruction" means the result of all chemical reactions within the medium (here, atmosphere) that remove a certain amount of a particular species from the medium. "tendency_of_X" means derivative of X with respect to time. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_destructionMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". "tendency_of_X" means derivative of X with respect to time. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Chemical destruction" means the result of all chemical reactions within the medium (here, atmosphere) that remove a certain amount of a particular species from the medium. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen.
tendency_of_atmosphere_mole_concentration_of_ozone_due_to_chemical_productionMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Chemical production" means the result of all chemical reactions within the medium (here, atmosphere) that produce a certain amount of the particular species. "tendency_of_X" means derivative of X with respect to time. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen.
tendency_of_atmosphere_moles_of_acetic_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for acetic_acid is CH3COOH. The IUPAC name for acetic acid is ethanoic acid.
tendency_of_atmosphere_moles_of_aceto_nitrile"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for aceto-nitrile is CH3CN. The IUPAC name for aceto-nitrile is ethanenitrile.
tendency_of_atmosphere_moles_of_alpha_hexachlorocyclohexane"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for alpha_hexachlorocyclohexane is C6H6Cl6.
tendency_of_atmosphere_moles_of_alpha_pinene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for alpha_pinene is C10H16. The IUPAC name for alpha-pinene is (1S,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-2-ene.
tendency_of_atmosphere_moles_of_ammonia"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ammonia is NH3.
tendency_of_atmosphere_moles_of_anthropogenic_nmvoc_expressed_as_carbon"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Anthropogenic" means influenced, caused, or created by human activity.
tendency_of_atmosphere_moles_of_atomic_bromine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic bromine is Br.
tendency_of_atmosphere_moles_of_atomic_chlorine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic chlorine is Cl.
tendency_of_atmosphere_moles_of_atomic_nitrogen"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for atomic nitrogen is N.
tendency_of_atmosphere_moles_of_benzene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for benzene is C6H6. Benzene is the simplest aromatic hydrocarbon and has a ring structure consisting of six carbon atoms joined by alternating single and double chemical bonds. Each carbon atom is additionally bonded to one hydrogen atom. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
tendency_of_atmosphere_moles_of_beta_pinene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for beta_pinene is C10H16. The IUPAC name for beta-pinene is (1S,5S)-6,6-dimethyl-2-methylenebicyclo[3.1.1]heptane.
tendency_of_atmosphere_moles_of_biogenic_nmvoc_expressed_as_carbon"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Biogenic" means influenced, caused, or created by natural processes.
tendency_of_atmosphere_moles_of_bromine_chloride"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine chloride is BrCl.
tendency_of_atmosphere_moles_of_bromine_monoxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine monoxide is BrO.
tendency_of_atmosphere_moles_of_bromine_nitrate"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for bromine nitrate is BrONO2.
tendency_of_atmosphere_moles_of_brox_expressed_as_bromine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Brox" describes a family of chemical species consisting of inorganic bromine compounds with the exception of hydrogen bromide (HBr) and bromine nitrate (BrONO2). "Brox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. Standard names that use the term "inorganic_bromine" are used for quantities that contain all inorganic bromine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
tendency_of_atmosphere_moles_of_butane"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for butane is C4H10. Butane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_carbon_dioxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for carbon dioxide is CO2.
tendency_of_atmosphere_moles_of_carbon_monoxide
alias: tendency_of_moles_of_carbon_monoxide_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula ofcarbon monoxide is CO.
tendency_of_atmosphere_moles_of_carbon_tetrachloride
alias: tendency_of_moles_of_carbon_tetrachloride_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula ofcarbon tetrachloride is CCl4.
tendency_of_atmosphere_moles_of_cfc11
alias: tendency_of_moles_of_cfc11_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula ofCFC11 is CFCl3. The IUPAC name fof CFC11 is trichloro-fluoro-methane.
tendency_of_atmosphere_moles_of_cfc113
alias: tendency_of_moles_of_cfc113_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. Thechemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane.
tendency_of_atmosphere_moles_of_cfc113a"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula of CFC113a CCl3CF3. The IUPAC name for CFC113a is 1,1,1-trichloro-2,2,2-trifluoro-ethane.
tendency_of_atmosphere_moles_of_cfc114
alias: tendency_of_moles_of_cfc114_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula ofCFC114 is CClF2CClF2. The IUPAC name for CFC114 is 1,2-dichloro-1,1,2,2-tetrafluoro-ethane.
tendency_of_atmosphere_moles_of_cfc115
alias: tendency_of_moles_of_cfc115_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. Thechemical formula of CFC115 is CClF2CF3. The IUPAC name for CFC115 is 1-chloro-1,1,2,2,2-pentafluoro-ethane.
tendency_of_atmosphere_moles_of_cfc12
alias: tendency_of_moles_of_cfc12_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. Thechemical formula for CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane.
tendency_of_atmosphere_moles_of_chlorine_dioxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine dioxide is OClO.
tendency_of_atmosphere_moles_of_chlorine_monoxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine monoxide is ClO.
tendency_of_atmosphere_moles_of_chlorine_nitrate"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for chlorine nitrate is ClONO2.
tendency_of_atmosphere_moles_of_clox_expressed_as_chlorine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Clox" describes a family of chemical species consisting of inorganic chlorine compounds with the exception of hydrogen chloride (HCl) and chlorine nitrate (ClONO2). "Clox" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity with a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. Standard names that use the term "inorganic_chlorine" are used for quantities that contain all inorganic chlorine species including HCl and ClONO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
tendency_of_atmosphere_moles_of_dichlorine_peroxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dichlorine peroxide is Cl2O2.
tendency_of_atmosphere_moles_of_dimethyl_sulfide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dimethyl sulfide is (CH3)2S. Dimethyl sulfide is sometimes referred to as DMS.
tendency_of_atmosphere_moles_of_dinitrogen_pentoxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for dinitrogen pentoxide is N2O5.
tendency_of_atmosphere_moles_of_ethane"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethane is C2H6. Ethane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_ethanol"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethanol is C2H5OH.
tendency_of_atmosphere_moles_of_ethene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethene is C2H4. Ethene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_ethyne"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ethyne is HC2H. Ethyne is the IUPAC name for this species, which is also commonly known as acetylene.
tendency_of_atmosphere_moles_of_formaldehyde"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
tendency_of_atmosphere_moles_of_formic_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for formic acid is HCOOH. The IUPAC name for formic acid is methanoic acid.
tendency_of_atmosphere_moles_of_gaseous_divalent_mercury"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Divalent mercury" means all compounds in which the mercury has two binding sites to other ion(s) in a salt or to other atom(s) in a molecule.
tendency_of_atmosphere_moles_of_gaseous_elemental_mercury"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for mercury is Hg.
tendency_of_atmosphere_moles_of_halon1202
alias: tendency_of_moles_of_halon1202_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1202 is CBr2F2. The IUPAC name for halon1202 is dibromo-difluoro-methane.
tendency_of_atmosphere_moles_of_halon1211
alias: tendency_of_moles_of_halon1211_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1211 is CBrClF2. The IUPAC name for halon1211 is bromo-chloro-difluoro-methane.
tendency_of_atmosphere_moles_of_halon1301
alias: tendency_of_moles_of_halon1301_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halon1301 is CBrF3. The IUPAC name for halon1301 is bromo-trifluoro-methane.
tendency_of_atmosphere_moles_of_halon2402
alias: tendency_of_moles_of_halon2402_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for halo2402 is C2Br2F4. The IUPAC name for halon2402 is 1,2-dibromo-1,1,2,2-tetrafluoro-ethane.
tendency_of_atmosphere_moles_of_hcc140a
alias: tendency_of_moles_of_hcc140a_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hcc140a is CH3CCl3. The IUPAC name for hcc140a is 1,1,1-trichloro-ethane.
tendency_of_atmosphere_moles_of_hcfc141b"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC141b is CH3CCl2F. The IUPAC name for HCFC141b is 1,1-dichloro-1-fluoroethane.
tendency_of_atmosphere_moles_of_hcfc142b"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC142b is CH3CClF2. The IUPAC name for HCFC142b is 1-chloro-1,1-difluoroethane.
tendency_of_atmosphere_moles_of_hcfc22
alias: tendency_of_moles_of_hcfc22_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane.
tendency_of_atmosphere_moles_of_hexachlorobiphenyl"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hexachlorobiphenyl is C12H4Cl6. This structure of this species consists of two linked benzene rings, each of which is additionally bonded to three chlorine atoms.
tendency_of_atmosphere_moles_of_hox_expressed_as_hydrogen"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "HOx" means a combination of two radical species containing hydrogen and oxygen: OH and HO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
tendency_of_atmosphere_moles_of_hydrogen_bromide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen bromide is HBr.
tendency_of_atmosphere_moles_of_hydrogen_chloride"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen chloride is HCl.
tendency_of_atmosphere_moles_of_hydrogen_cyanide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen cyanide is HCN.
tendency_of_atmosphere_moles_of_hydrogen_peroxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hydrogen peroxide is H2O2.
tendency_of_atmosphere_moles_of_hydroperoxyl_radical"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for the hydroperoxyl radical is HO2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
tendency_of_atmosphere_moles_of_hydroxyl_radical"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for the hydroxyl radical is OH. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
tendency_of_atmosphere_moles_of_hypobromous_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hypobromous acid is HOBr.
tendency_of_atmosphere_moles_of_hypochlorous_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for hypochlorous acid is HOCl.
tendency_of_atmosphere_moles_of_inorganic_bromine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Inorganic bromine", sometimes referred to as Bry, describes a family of chemical species which result from the degradation of source gases containing bromine (halons, methyl bromide, VSLS) and natural inorganic bromine sources such as volcanoes, seasalt and other aerosols. "Inorganic bromine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "brox" are used for quantities that contain all inorganic bromine species except HBr and BrONO2.
tendency_of_atmosphere_moles_of_inorganic_chlorine"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Inorganic chlorine", sometimes referred to as Cly, describes a family of chemical species which result from the degradation of source gases containing chlorine (CFCs, HCFCs, VSLS) and natural inorganic chlorine sources such as seasalt and other aerosols. "Inorganic chlorine" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. Standard names that use the term "clox" are used for quantities that contain all inorganic chlorine species except HCl and ClONO2.
tendency_of_atmosphere_moles_of_isoprene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for isoprene is CH2=C(CH3)CH=CH2. The IUPAC name for isoprene is 2-methyl-buta-1,3-diene. Isoprene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_limonene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for limonene is C10H16. The IUPAC name for limonene is 1-methyl-4-prop-1-en-2-yl-cyclohexene. Limonene is a member of the group of hydrocarbons known as terpenes. There are standard names for the terpene group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_methane
alias: tendency_of_moles_of_methane_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. Thereare standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_methanol"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methanol is CH3OH.
tendency_of_atmosphere_moles_of_methyl_bromide
alias: tendency_of_moles_of_methyl_bromide_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere,i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
tendency_of_atmosphere_moles_of_methyl_chloride
alias: tendency_of_moles_of_methyl_chloride_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
tendency_of_atmosphere_moles_of_methyl_hydroperoxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl hydroperoxide is CH3OOH.
tendency_of_atmosphere_moles_of_methyl_peroxy_radical"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for methyl_peroxy_radical is CH3O2. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
tendency_of_atmosphere_moles_of_molecular_hydrogen
alias: tendency_of_moles_of_molecular_hydrogen_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of molecular hydrogen is H2.
tendency_of_atmosphere_moles_of_nitrate_radical"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrate is NO3. In chemistry, a 'radical' is a highly reactive, and therefore shortlived, species.
tendency_of_atmosphere_moles_of_nitric_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitric acid is HNO3.
tendency_of_atmosphere_moles_of_nitric_acid_trihydrate_ambient_aerosol_particles
alias: tendency_of_atmosphere_moles_of_nitric_acid_trihydrate_ambient_aerosol
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. "tendency_of_X" means derivative of X with respect to time. The chemical formula for nitric acid is HNO3. Nitric acid trihydrate, sometimes referred to as NAT, is a stable crystalline substance consisting of three molecules of water to one molecule of nitric acid.
tendency_of_atmosphere_moles_of_nitrogen_dioxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrogen dioxide is NO2.
tendency_of_atmosphere_moles_of_nitrogen_monoxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrogen monoxide is NO.
tendency_of_atmosphere_moles_of_nitrous_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for nitrous acid is HNO2.
tendency_of_atmosphere_moles_of_nitrous_oxide
alias: tendency_of_moles_of_nitrous_oxide_in_atmosphere
"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X contained in the entire atmosphere, i.e, summed over the atmospheric column and over the entire globe. The chemical formula of nitrous oxide is N2O.
tendency_of_atmosphere_moles_of_nmvoc_expressed_as_carbon"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "nmvoc" means non methane volatile organic compounds; "nmvoc" is the term used in standard names to describe the group of chemical species having this classification that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_atmosphere_moles_of_nox_expressed_as_nitrogen"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
tendency_of_atmosphere_moles_of_noy_expressed_as_nitrogen"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Noy" describes a family of chemical species. The family usually includes atomic nitrogen (N), nitrogen monoxide (NO), nitrogen dioxide (NO2), dinitrogen pentoxide (N2O5), nitric acid (HNO3), peroxynitric acid (HNO4), bromine nitrate (BrONO2) , chlorine nitrate (ClONO2) and organic nitrates (most notably peroxyacetyl nitrate, sometimes referred to as PAN, (CH3COO2NO2)). The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A.
tendency_of_atmosphere_moles_of_ozone"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for ozone is O3.
tendency_of_atmosphere_moles_of_peroxyacetyl_nitrate"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for peroxyacetyl nitrate, sometimes referred to as PAN, is CH3COO2NO2. The IUPAC name for peroxyacetyl_nitrate is nitroethaneperoxoate.
tendency_of_atmosphere_moles_of_peroxynitric_acid"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for peroxynitric acid, sometimes referred to as PNA, is HO2NO2.
tendency_of_atmosphere_moles_of_propane"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for propane is C3H8. Propane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_propene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for propene is C3H6. Propene is a member of the group of hydrocarbons known as alkenes. There are standard names for the alkene group as well as for some of the individual species.
tendency_of_atmosphere_moles_of_radon"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical symbol for radon is Rn.
tendency_of_atmosphere_moles_of_sulfate_dry_aerosol_particles
alias: tendency_of_atmosphere_moles_of_sulfate_dry_aerosol
The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol particles take up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the particles. "Dry aerosol particles" means aerosol particles without any water uptake. "tendency_of_X" means derivative of X with respect to time. The chemical formula for the sulfate anion is SO4(2-).
tendency_of_atmosphere_moles_of_sulfur_dioxide"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for sulfur dioxide is SO2.
tendency_of_atmosphere_moles_of_toluene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for toluene is C6H5CH3. Toluene has the same structure as benzene, except that one of the hydrogen atoms is replaced by a methyl group. The systematic name for toluene is methylbenzene.
tendency_of_atmosphere_moles_of_water_vapor"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe.
tendency_of_atmosphere_moles_of_xylene"tendency_of_X" means derivative of X with respect to time. The construction "atmosphere_moles_of_X" means the total number of moles of X in the entire atmosphere, i.e. summed over the atmospheric column and over the entire globe. The chemical formula for xylene is C6H4C2H6. In chemistry, xylene is a generic term for a group of three isomers of dimethylbenzene. The IUPAC names for the isomers are 1,2-dimethylbenzene, 1,3-dimethylbenzene and 1,4-dimethylbenzene. Xylene is an aromatic hydrocarbon. There are standard names that refer to aromatic_compounds as a group, as well as those for individual species.
tendency_of_atmosphere_number_content_of_aerosol_particles_due_to_dry_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Dry deposition" is the sum of turbulent deposition and gravitational settling. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_number_content_of_aerosol_particles_due_to_gravitational_settling"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_number_content_of_aerosol_particles_due_to_turbulent_depostion"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The sum of turbulent deposition and gravitational settling is dry deposition. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_number_content_of_aerosol_particles_due_to_wet_deposition"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Wet deposition" means deposition by precipitation. "tendency_of_X" means derivative of X with respect to time.
tendency_of_atmosphere_of_mole_concentration_of_carbon_monoxide_due_to_chemical_destructionMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Chemical destruction" means the result of all chemical reactions within the medium (here, atmosphere) that remove a certain amount of a particular species from the medium. "tendency_of_X" means derivative of X with respect to time. The chemical formula of carbon monoxide is CO.
tendency_of_atmosphere_potential_energy_content_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
tendency_of_bedrock_altitude"tendency_of_X" means derivative of X with respect to time. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. "Bedrock" is the solid Earth surface beneath land ice or ocean water.
tendency_of_dry_energy_content_of_atmosphere_layer"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry energy is the sum of dry static energy and kinetic energy. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
tendency_of_dry_static_energy_content_of_atmosphere_layer"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
tendency_of_eastward_wind"tendency_of_X" means derivative of X with respect to time. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_eastward_wind_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_eastward_wind_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_eastward_wind_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_eastward_wind_due_to_eliassen_palm_flux_divergenceThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Eliassen Palm flux" is a widely used vector in the meridional plane, and the divergence of this flux appears as a forcing in the Transformed Eulerian mean formulation of the zonal mean zonal wind equation. Thus, "eastward_wind" here will generally be the zonally averaged eastward wind.
tendency_of_eastward_wind_due_to_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The quantity named tendency_of_eastward_wind_due_to_gravity_wave_drag is the sum of the tendencies due to orographic and nonorographic gravity waves which have standard names of tendency_of_eastward_wind_due_to_orographic_gravity_wave_drag and tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_drag, respectively.
tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). The total tendency of the eastward wind due to gravity waves has the standard name tendency_of_eastward_wind_due_to_gravity_wave_drag. It is the sum of the tendencies due to orographic gravity waves and nonorographic waves. The tendency of eastward wind due to orographic gravity waves has the standard name tendency_of_eastward_wind_due_to_orographic_gravity_wave_drag.
tendency_of_eastward_wind_due_to_numerical_artefactsThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). The total tendency of the eastward wind will include a variety of numerical and diffusive effects: a variable with this standard name is sometimes needed to allow the momentum budget to be closed.
tendency_of_eastward_wind_due_to_orographic_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). The total tendency of the eastward wind due to gravity waves has the standard name tendency_of_eastward_wind_due_to_gravity_wave_drag. It is the sum of the tendencies due to orographic gravity waves and nonorographic waves. The tendency of eastward wind due to nonorographic gravity waves has the standard name tendency_of_eastward_wind_due_to_nonorographic_gravity_wave_drag.
tendency_of_enthalpy_content_of_atmosphere_layer_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume.
tendency_of_global_average_sea_level_changeGlobal average sea level change is due to change in volume of the water in the ocean, caused by mass and/or density change, or to change in the volume of the ocean basins, caused by tectonics etc. It is sometimes called "eustatic", which is a term that also has other definitions. It differs from the change in the global average sea surface height relative to the centre of the Earth by the global average vertical movement of the ocean floor. Zero sea level change is an arbitrary level. "tendency_of_X" means derivative of X with respect to time.
tendency_of_kinetic_energy_content_of_atmosphere_layer_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
tendency_of_land_ice_thickness"tendency_of_X" means derivative of X with respect to time. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock and also includes ice-shelves. "Thickness" means the vertical extent of a layer..
tendency_of_mass_concentration_of_elemental_carbon_dry_aerosol_particles_in_air_due_to_emission_from_aviation
alias: tendency_of_mass_concentration_of_black_carbon_dry_aerosol_in_air_due_to_emission_from_aviation
"tendency_of_X" means derivative of X with respect to time. Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The mass is the total mass of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. the surface of the earth). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol particles" means aerosol particles without any water uptake. The "aviation" sector includes fuel combustion activities related to civil aviation. "Aviation" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3a as defined in the 2006 IPCC guidelines for national greenhouse gas inventories". Chemically, “elemental carbon” is the carbonaceous fraction of particulate matter that is thermally stable in an inert atmosphere to high temperatures near 4000K and can only be gasified by oxidation starting at temperatures above 340 C. It is assumed to be inert and non-volatile under atmospheric conditions and insoluble in any solvent (Ogren and Charlson, 1983).
tendency_of_mass_concentration_of_nitrogen_dioxide_in_air_due_to_emission_from_aviation"tendency_of_X" means derivative of X with respect to time. Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen dioxide is NO2. The "aviation" sector includes fuel combustion activities related to civil aviation. "Aviation" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3a as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_mass_concentration_of_nitrogen_monoxide_in_air_due_to_emission_from_aviation"tendency_of_X" means derivative of X with respect to time. Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The mass is the total mass of the molecules. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. The chemical formula for nitrogen monoxide is NO. The "aviation" sector includes fuel combustion activities related to civil aviation. "Aviation" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3a as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_mass_concentration_of_nox_expressed_as_nitrogen_monoxide_in_air_due_to_emission_from_aviation"tendency_of_X" means derivative of X with respect to time. Mass concentration means mass per unit volume and is used in the construction mass_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. "Nox" means a combination of two radical species containing nitrogen and oxygen: NO+NO2. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The "aviation" sector includes fuel combustion activities related to civil aviation. "Aviation" is the term used in standard names to describe a collection of emission sources. A variable which has this value for the standard_name attribute should be accompanied by a comment attribute which lists the source categories and provides a reference to the categorization scheme, for example, "IPCC (Intergovernmental Panel on Climate Change) source category 1A3a as defined in the 2006 IPCC guidelines for national greenhouse gas inventories".
tendency_of_mass_content_of_water_vapor_in_atmosphere_layer
alias: tendency_of_water_vapor_content_of_atmosphere_layer
"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
tendency_of_mass_content_of_water_vapor_in_atmosphere_layer_due_to_convection
alias: tendency_of_water_vapor_content_of_atmosphere_layer_due_to_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
tendency_of_mass_content_of_water_vapor_in_atmosphere_layer_due_to_deep_convection
alias: tendency_of_water_vapor_content_of_atmosphere_layer_due_to_deep_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
tendency_of_mass_content_of_water_vapor_in_atmosphere_layer_due_to_shallow_convection
alias: tendency_of_water_vapor_content_of_atmosphere_layer_due_to_shallow_convection
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well.
tendency_of_mass_content_of_water_vapor_in_atmosphere_layer_due_to_turbulence
alias: tendency_of_water_vapor_content_of_atmosphere_layer_due_to_turbulence
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary variable) as well.
tendency_of_mass_fraction_of_cloud_condensed_water_in_air"Tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). "Condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_cloud_condensed_water_in_air_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_ice_in_air"tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_ice_in_air_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_ice_in_air_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_liquid_water_in_air"tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_liquid_water_in_air_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_cloud_liquid_water_in_air_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X).
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_advectionMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_autoconversion_to_rainMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Autoconversion is the process of collision and coalescence which results in the formation of precipitation particles from cloud water droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_autoconversion_to_snowMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Autoconversion is the process of collision and coalescence which results in the formation of precipitation particles from cloud water droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_boundary_layer_mixing'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_cloud_microphysics'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. 'cloud_microphysics' is the sum of many cloud processes such as condensation, evaporation, homogeneous nucleation, heterogeneous nucleation, deposition, sublimation, the Bergeron-Findeisen process, riming, accretion, aggregationand icefall. The precise list of processes that are included in 'cloud_microphysics' canvary between models. Where possible, the data variable should be accompanied by a complete description of the processes included, for example, by using a comment attribute. Standard names also exist to describe the tendencies due to the separate processes. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_condensation_and_evaporationMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_condensed_water_in_air_due_to_icefallMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "condensed_water" means liquid and ice.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_accretion_to_snowMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Accretion is the growth of a hydrometeor by collision with cloud droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_advectionMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_aggregationMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Aggregation is the clumping together of frozen cloud particles to produce snowflakes. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_bergeron_findeisen_process_from_cloud_liquid'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The Bergeron-Findeisen process is the conversion of cloud liquid water to cloud ice arising from the fact that water vapor has a lower equilibrium vapor pressure with respect to ice than it has with respect to liquid water at the same subfreezing temperature. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_boundary_layer_mixing'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_cloud_microphysics'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. 'cloud_microphysics' is the sum of many cloud processes such as condensation, evaporation, homogeneous nucleation, heterogeneous nucleation, deposition, sublimation, the Bergeron-Findeisen process, riming, accretion, aggregationand icefall. The precise list of processes that are included in 'cloud_microphysics' canvary between models. Where possible, the data variable should be accompanied by a complete description of the processes included, for example, by using a comment attribute. Standard names also exist to describe the tendencies due to the separate processes. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_convective_detrainmentMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_deposition_and_sublimationMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Sublimation is the conversion of solid into vapor. Deposition is the opposite of sublimation, i.e. it is the conversion of vapor into solid. Deposition is distinct from the processes of dry deposition and wet deposition of atmospheric aerosol particles, which are referred to in some standard names. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_evaporation_of_melting_iceMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_heterogeneous_nucleation_from_cloud_liquid_water
alias: tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_heterogeneous_nucleation_from_cloud_liquid
Mass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Heterogeneous nucleation occurs when a small particle of a substance other than water acts as a freezing or condensation nucleus.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_heterogeneous_nucleation_from_water_vaporMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Heterogeneous nucleation occurs when a small particle of a substance other than water acts as a freezing or condensation nucleus.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_homogeneous_nucleationMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Homogeneous nucleation occurs when a small number of water molecules combine to form a freezing or condensation nucleus.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_icefallMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_melting_to_cloud_liquid_water
alias: tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_melting_to_cloud_liquid
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_melting_to_rainMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_riming_from_cloud_liquid_water
alias: tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_riming_from_cloud_liquid
Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Riming is the rapid freezing of supercooled water onto a surface. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_ice_in_air_due_to_riming_from_rainMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Riming is the rapid freezing of supercooled water onto a surface. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_accretion_to_rainMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Accretion is the growth of a hydrometeor by collision with cloud droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_accretion_to_snowMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Accretion is the growth of a hydrometeor by collision with cloud droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_advectionMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_autoconversionMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Autoconversion is the process of collision and coalescence which results in the formation of precipitation particles from cloud water droplets or ice crystals. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_bergeron_findeisen_process_to_cloud_ice'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The Bergeron-Findeisen process is the conversion of cloud liquid water to cloud ice arising from the fact that water vapor has a lower equilibrium vapor pressure with respect to ice than it has with respect to liquid water at the same subfreezing temperature. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_boundary_layer_mixing'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_cloud_microphysics'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. 'cloud_microphysics' is the sum of many cloud processes such as condensation, evaporation, homogeneous nucleation, heterogeneous nucleation, deposition, sublimation, the Bergeron-Findeisen process, riming, accretion, aggregationand icefall. The precise list of processes that are included in 'cloud_microphysics' canvary between models. Where possible, the data variable should be accompanied by a complete description of the processes included, for example, by using a comment attribute. Standard names also exist to describe the tendencies due to the separate processes. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporationMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_boundary_layer_mixingMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_convectionMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_longwave_heatingMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "longwave" means longwave radiation.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_pressure_changeMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_shortwave_heatingMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "shortwave" means shortwave radiation.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_condensation_and_evaporation_from_turbulenceMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Evaporation is the conversion of liquid or solid into vapor. Condensation is the conversion of vapor into liquid. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_convective_detrainmentMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_heterogeneous_nucleationMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Heterogeneous nucleation occurs when a small particle of a substance other than water acts asa freezing or condensation nucleus.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_homogeneous_nucleationMass fraction is used in the construction mass_fraction_of_X_in_Y, whereX is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Homogeneous nucleation occurs when a small number of water molecules combine to form a freezing or condensation nucleus.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_melting_from_cloud_iceMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mass_fraction_of_stratiform_cloud_liquid_water_in_air_due_to_rimingMass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. Riming is the rapid freezing of supercooled water onto a surface. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_middle_atmosphere_moles_of_carbon_monoxide
alias: tendency_of_moles_of_carbon_monoxide_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of carbon monoxide is CO.
tendency_of_middle_atmosphere_moles_of_hcc140a
alias: tendency_of_moles_of_hcc140a_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of HCC140a is CH3CCl3. The IUPAC name for HCC 140a is 1,1,1-trichloroethane.
tendency_of_middle_atmosphere_moles_of_methane
alias: tendency_of_moles_of_methane_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methane is CH4.
tendency_of_middle_atmosphere_moles_of_methyl_bromide
alias: tendency_of_moles_of_methyl_bromide_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methyl bromide is CH3Br.
tendency_of_middle_atmosphere_moles_of_methyl_chloride
alias: tendency_of_moles_of_methyl_chloride_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methyl chloride is CH3Cl.
tendency_of_middle_atmosphere_moles_of_molecular_hydrogen
alias: tendency_of_moles_of_molecular_hydrogen_in_middle_atmosphere
"tendency_of_X" means derivative of X with respect to time. "middle_atmosphere_moles_of_X" means the total number of moles of X contained in the troposphere and stratosphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of molecular hydrogen is H2.
tendency_of_mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water_due_to_biological_production'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
tendency_of_mole_concentration_of_aragonite_expressed_as_carbon_in_sea_water_due_to_dissolution'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
tendency_of_mole_concentration_of_calcite_expressed_as_carbon_in_sea_water_due_to_biological_production'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Calcite is a mineral that is a polymorph of calcium carbonate. Thechemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
tendency_of_mole_concentration_of_calcite_expressed_as_carbon_in_sea_water_due_to_dissolution'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Calcite is a mineral that is a polymorph of calcium carbonate. Thechemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
tendency_of_mole_concentration_of_dissolved_inorganic_carbon_in_sea_water_due_to_biological_processes'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_mole_concentration_of_dissolved_inorganic_iron_in_sea_water_due_to_biological_processes'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic iron" means iron ions, in oxidation states of both Fe2+ and Fe3+, in solution.
tendency_of_mole_concentration_of_dissolved_inorganic_nitrogen_in_sea_water_due_to_biological_processes'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Inorganic nitrogen" describes a family of chemical species which, in an ocean model, usually includes nitrite, nitrate and ammonium which act as nitrogennutrients. "Inorganic nitrogen" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_mole_concentration_of_dissolved_inorganic_phosphorus_in_sea_water_due_to_biological_processes
alias: tendency_of_mole_concentration_of_dissolved_inorganic_phosphate_in_sea_water_due_to_biological_processes
'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Dissolved inorganic phosphorus/phosphate means phosphate ions in solution.
tendency_of_mole_concentration_of_dissolved_inorganic_silicon_in_sea_water_due_to_biological_processes
alias: tendency_of_mole_concentration_of_dissolved_inorganic_silicate_in_sea_water_due_to_biological_processes
'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Dissolved inorganic silicon/silicate means silicate ions in solution.
tendency_of_mole_concentration_of_dissolved_iron_in_sea_water_due_to_dissolution_from_inorganic_particlesDissolution, remineralization and desorption of iron back to the dissolved phase 'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity namedby omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_dissolved_iron_in_sea_water_due_to_grazing_of_phytoplankton'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. 'Grazing of phytoplankton' means the grazing of phytoplankton by zooplankton.
tendency_of_mole_concentration_of_dissolved_iron_in_sea_water_due_to_scavenging_by_inorganic_particles'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_iron_in_sea_water_due_to_biological_production'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production'Mole concentration' means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_calcareous_phytoplanktonMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". "Calcareous phytoplankton" are phytoplankton that produce calcite. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_diatomsMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". Diatoms are single-celled phytoplankton with an external skeleton made of silica. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_diazotrophsMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction mole_concentration_of_X_in_Y, where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". In ocean modelling, diazotrophs are phytoplankton of the phylum cyanobacteria distinct from other phytoplankton groups in their ability to fix nitrogen gas in addition to nitrate and ammonium. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_miscellaneous_phytoplanktonMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "Miscellaneous phytoplankton" are all those phytoplankton that are not diatoms, diazotrophs, calcareous phytoplankton, picophytoplankton or other seperately named components of the phytoplankton population. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_net_primary_production_by_picophytoplanktonMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". Picophytoplankton are phytoplankton of less than 2 micrometers in size. Phytoplankton are autotrophic prokaryotic or eukaryotic algae that live near the water surface where there is sufficient light to support photosynthesis. "tendency_of_X" means derivative of X with respect to time.
tendency_of_mole_concentration_of_particulate_organic_matter_expressed_as_carbon_in_sea_water_due_to_nitrate_utilizationMole concentration means number of moles per unit volume, also called "molarity", and is used in the construction "mole_concentration_of_X_in_Y", where X is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as "nitrogen" or a phrase such as "nox_expressed_as_nitrogen". The phrase "expressed_as" is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Nitrate utilization" means net primary production of carbon by phytoplankton based on nitrate alone. "Production of carbon" means the production of biomass expressed as the mass of carbon which it contains. Net primary production is the excess of gross primary production (the rate of synthesis of biomass from inorganic precursors) by autotrophs ("producers"), for example, photosynthesis in plants or phytoplankton, over the rate at which the autotrophs themselves respire some of this biomass. In the oceans, carbon production per unit volume is often found at a number of depths at a given horizontal location. That quantity can then be integrated to calculate production per unit area at the location. Standard names for production per unit area use the term "productivity". "tendency_of_X" means derivative of X with respect to time. The chemical formula for the nitrate anion is NO3-.
tendency_of_mole_concentration_of_silicon_in_sea_water_due_to_biological_production'Mole concentration' means number of moles per unit volume, also called"molarity", and is used in the construction mole_concentration_of_X_in_Y, whereX is a material constituent of Y. A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_northward_wind"tendency_of_X" means derivative of X with respect to time. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_northward_wind_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_northward_wind_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_northward_wind_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_northward_wind_due_to_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
tendency_of_ocean_barotropic_streamfunction"tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_eddy_kinetic_energy_content_due_to_bolus_transport"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Bolus transport in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field.
tendency_of_ocean_mole_content_of_aragonite_expressed_as_carbon_due_to_biological_production"Content" indicates a quantity per unit area. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Aragonite is a mineral that is a polymorph of calcium carbonate. The chemical formula of aragonite is CaCO3. Standard names also exist for calcite, another polymorph of calcium carbonate.
tendency_of_ocean_mole_content_of_calcite_expressed_as_carbon_due_to_biological_production"Content" indicates a quantity per unit area. The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Calcite is a mineral that is a polymorph of calcium carbonate. The chemical formula of calcite is CaCO3. Standard names also exist for aragonite, another polymorph of calcium carbonate.
tendency_of_ocean_mole_content_of_carbon_due_to_runoff_and_sediment_dissolution"Content" indicates a quantity per unit area. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of termswhich together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_carbon_due_to_sedimentation"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_dissolved_inorganic_carbon"Content" indicates a quantity per unit area. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" isthe term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_ocean_mole_content_of_dissolved_inorganic_carbon_due_to_biological_processes"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic carbon" describes a family of chemical species in solution, including carbon dioxide, carbonic acid and the carbonate and bicarbonate anions. "Dissolved inorganic carbon" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_ocean_mole_content_of_dissolved_inorganic_iron"Content" indicates a quantity per unit area. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic iron" means iron ions, in oxidation states of both Fe2+ and Fe3+, in solution.
tendency_of_ocean_mole_content_of_dissolved_inorganic_iron_due_to_biological_processes"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic iron" means iron ions, in oxidation states of both Fe2+ and Fe3+, in solution.
tendency_of_ocean_mole_content_of_dissolved_inorganic_nitrogen"Content" indicates a quantity per unit area. "tendency_of_X" means derivative of X with respect to time. "Inorganic nitrogen" describes a family of chemical species which, in an ocean model, usually includes nitrite, nitrate and ammonium which act as nitrogen nutrients. "Inorganic nitrogen" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variableshould be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_ocean_mole_content_of_dissolved_inorganic_nitrogen_due_to_biological_processes"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Inorganic nitrogen" describes a family of chemical species which, in an ocean model, usually includes nitrite, nitrate and ammonium which act as nitrogen nutrients. "Inorganic nitrogen" is the term used in standard names for all species belonging to the family that are represented within a given model. The list of individual species that are included in a quantity having a group chemical standard name can vary between models. Where possible, the data variable should be accompanied by a complete description of the species represented, for example, by using a comment attribute.
tendency_of_ocean_mole_content_of_dissolved_inorganic_phosphorus"Content" indicates a quantity per unit area. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic phosphorus/phosphate" means phosphate ions in solution. The chemical formula of the phosphate anion is PO4 with a charge of minus three.
tendency_of_ocean_mole_content_of_dissolved_inorganic_phosphorus_due_to_biological_processes"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic phosphorus/phosphate" means phosphate ions in solution. The chemical formula of the phosphate anion is PO4 with a charge of minus three.
tendency_of_ocean_mole_content_of_dissolved_inorganic_silicon"Content" indicates a quantity per unit area. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic silicon/silicate" means silicate ions in solution.
tendency_of_ocean_mole_content_of_dissolved_inorganic_silicon_due_to_biological_processes"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Dissolved inorganic silicon/silicate" means silicate ions in solution.
tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_denitrification_and_sedimentation"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. 'Denitrification' is the conversion of nitrate into gasesous compounds such as nitric oxide, nitrous oxide and molecular nitrogen which are then emitted to the atmosphere. 'Sedimentation' is the sinking of particulate matter to the floor of a body of water. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_deposition_and_fixation_and_runoff"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. Deposition of nitrogen into the ocean is the sum of dry and wet depositionof nitrogen species onto the ocean surface from the atmosphere. 'Nitrogen fixation' means the production of ammonia from nitrogen gas. Organisms that fix nitrogen are termed 'diazotrophs'. Diazotrophic phytoplankton can fix atmospheric nitrogen, thus increasing the content of nitrogen in the ocean. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage."tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_elemental_nitrogen_due_to_fixation"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. 'Nitrogen fixation' means the production of ammonia from nitrogen gas. Organisms that fix nitrogen are termed 'diazotrophs'. Diazotrophic phytoplankton can fix atmospheric nitrogen, thus increasing the content of nitrogen in the ocean. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_iron_due_to_biological_production"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_iron_due_to_deposition_and_runoff_and_sediment_dissolution"Content" indicates a quantity per unit area. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of termswhich together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_iron_due_to_sedimentation"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_mole_content_of_silicon_due_to_biological_production"Content" indicates a quantity per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is asingle term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_potential_energy_content"Content" indicates a quantity per unit area. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.) "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_potential_energy_content_due_to_background"Content" indicates a quantity per unit area. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.) "Due to background" means caused by a time invariant imposed field which may be either constant over the globe or spatially varying, depending on the ocean model used. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_ocean_potential_energy_content_due_to_tides"Content" indicates a quantity per unit area. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.) "Due to tides" means due to all astronomical gravity changes which manifest as tides. No distinction is made between different tidal components. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_potential_energy_content_of_atmosphere_layer_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
tendency_of_potential_energy_content_of_ocean_layer_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
tendency_of_potential_energy_content_of_ocean_layer_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. Potential energy is the sum of the gravitational potential energy relative to the geoid and the centripetal potential energy. (The geopotential is the specific potential energy.)
tendency_of_sea_ice_amount_due_to_basal_melting"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_sea_ice_amount_due_to_congelation_ice_accumulation"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Congelation ice" means the freezing of sea water onto the underside of thin, new sea ice that has been formed by small areas of frazil ice crystals joining together into a continuous layer at the sea surface. Congelation ice forms under calm water conditions; it thickens and stabilizes the layer of sea ice and produces a smooth bottom surface.
tendency_of_sea_ice_amount_due_to_frazil_ice_accumulation_in_leads"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Frazil" consists of needle like crystals of ice, typically between three and four millimeters in diameter, which form as sea water begins to freeze. Salt is expelled during the freezing process and frazil ice consists of nearly pure fresh water. Leads are stretches of open water within wider areas of sea ice.
tendency_of_sea_ice_amount_due_to_lateral_growth_of_ice_floes"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. An ice floe is a flat expanse of sea ice, generally taken to be less than 10 km across. "Lateral growth of ice floe" means the accumulation of ice at the extreme edges of the ice area.
tendency_of_sea_ice_amount_due_to_snow_conversion"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "Snow to sea ice conversion" occurs when the mass of snow accumulated on an area of sea ice is sufficient to cause the ice to become mostly submerged. Waves can then wash over the ice and snow surface and freeze into a layer that becomes "snow ice".
tendency_of_sea_ice_amount_due_to_surface_melting"Amount" means mass per unit area. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_sea_ice_area_fraction_due_to_dynamics"tendency_of_X" means derivative of X with respect to time. "X_area_fraction" means the fraction of horizontal area occupied by X. Sea ice area fraction is area of the sea surface occupied by sea ice. It is also called "sea ice concentration". "Sea ice dynamics" refers to the motion of sea ice.
tendency_of_sea_ice_area_fraction_due_to_ridging"X_area_fraction" means the fraction of horizontal area occupied by X. Sea ice area fraction is area of the sea surface occupied by sea ice. It is also called "sea ice concentration". The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Sea ice "ridging" occurs in rough sea conditions. The motion of the sea surface can cause areas of sea ice to deform and fold resulting in ridged upper and lower surfaces. The ridges can be as much as twenty metres thick if thick ice is deformed.
tendency_of_sea_ice_area_fraction_due_to_thermodynamics"tendency_of_X" means derivative of X with respect to time. "X_area_fraction" means the fraction of horizontal area occupied by X. Sea ice area fraction is area of the sea surface occupied by sea ice. It is also called "sea ice concentration". "Sea ice thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes.
tendency_of_sea_ice_thickness_due_to_dynamics"tendency_of_X" means derivative of X with respect to time. "Sea ice dynamics" refers to the motion of sea ice.
tendency_of_sea_ice_thickness_due_to_thermodynamicsThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time.
tendency_of_sea_surface_height_above_sea_levelSea_level means mean sea level, which is close to the geoid in sea areas. "Sea surface height" is a time-varying quantity. "tendency_of_X" means derivative of X with respect to time.
tendency_of_sea_water_alkalinity_expressed_as_mole_equivalent_due_to_biological_processes'sea_water_alkalinity_expressed_as_mole_equivalent' is the total alkalinity equivalent concentration (including carbonate, nitrogen, silicate, and borate components). The specification of a physical process by the phrase due_to_process means that thequantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X withrespect to time.
tendency_of_sea_water_salinity"tendency_of_X" means derivative of X with respect to time. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_salinity_due_to_advection"tendency_of_X" means derivative of X with respect to time. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_salinity_due_to_bolus_advection"tendency_of_X" means derivative of X with respect to time. Bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_salinity_due_to_horizontal_mixing"tendency_of_X" means derivative of X with respect to time. "Horizontal mixing" means any horizontal transport other than by advection and bolus advection, usually represented as horizontal diffusion in ocean models. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_salinity_due_to_sea_ice_thermodynamics"tendency_of_X" means derivative of X with respect to time. "Sea ice thermodynamics" refers to the addition or subtraction of sea ice mass due to surface and basal fluxes. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_salinity_due_to_vertical_mixing"tendency_of_X" means derivative of X with respect to time. "Vertical mixing" means any vertical transport other than by advection and bolus advection, represented by a combination of vertical diffusion, turbulent mixing and convection in ocean models. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water salinity is the salt content of sea water, often on the Practical Salinity Scale of 1978. However, the unqualified term 'salinity' is generic and does not necessarily imply any particular method of calculation. The units of salinity are dimensionless and normally given as 1e-3 or 0.001 i.e. parts per thousand. There are standard names for the more precisely defined salinity quantities: sea_water_knudsen_salinity, S_K (used for salinity observations between 1901 and 1966), sea_water_cox_salinity, S_C (used for salinity observations between 1967 and 1977), sea_water_practical_salinity, S_P (used for salinity observations from 1978 to the present day), sea_water_absolute_salinity, S_A, sea_water_preformed_salinity, S_*, and sea_water_reference_salinity. Practical Salinity is reported on the Practical Salinity Scale of 1978 (PSS-78), and is usually based on the electrical conductivity of sea water in observations since the 1960s. Conversion of data between the observed scales follows: S_P = (S_K - 0.03) * (1.80655 / 1.805) and S_P = S_C, however the accuracy of the latter is dependent on whether chlorinity or conductivity was used to determine the S_C value, with this inconsistency driving the development of PSS-78. The more precise standard names should be used where appropriate for both modelled and observed salinities. In particular, the use of sea_water_salinity to describe salinity observations made from 1978 onwards is now deprecated in favor of the term sea_water_practical_salinity which is the salinity quantity stored by national data centers for post-1978 observations. The only exception to this is where the observed salinities are definitely known not to be recorded on the Practical Salinity Scale. The unit "parts per thousand" was used for sea_water_knudsen_salinity and sea_water_cox_salinity.
tendency_of_sea_water_temperature"tendency_of_X" means derivative of X with respect to time. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
tendency_of_sea_water_temperature_due_to_advection"tendency_of_X" means derivative of X with respect to time. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
tendency_of_sea_water_temperature_due_to_bolus_advection"tendency_of_X" means derivative of X with respect to time. Bolus advection in an ocean model means the part due to a scheme representing eddy-induced effects not included in the velocity field. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
tendency_of_sea_water_temperature_due_to_horizontal_mixing"tendency_of_X" means derivative of X with respect to time. "Horizontal mixing" means any horizontal transport other than by advection and bolus advection, usually represented as horizontal diffusion in ocean models. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
tendency_of_sea_water_temperature_due_to_vertical_mixing"tendency_of_X" means derivative of X with respect to time. "Vertical mixing" means any vertical transport other than by advection and bolus advection, represented by a combination of vertical diffusion, turbulent mixing and convection in ocean models. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Sea water temperature is the in situ temperature of the sea water. For observed data, depending on the period during which the observation was made, the measured in situ temperature was recorded against standard "scales". These historical scales include the International Practical Temperature Scale of 1948 (IPTS-48; 1948-1967), the International Practical Temperature Scale of 1968 (IPTS-68, Barber, 1969; 1968-1989) and the International Temperature Scale of 1990 (ITS-90, Saunders 1990; 1990 onwards). Conversion of data between these scales follows t68 = t48 - (4.4 x 10e-6) * t48(100 - t - 48); t90 = 0.99976 * t68. Observations made prior to 1948 (IPTS-48) have not been documented and therefore a conversion cannot be certain. Differences between t90 and t68 can be up to 0.01 at temperatures of 40 C and above; differences of 0.002-0.007 occur across the standard range of ocean temperatures (-10 - 30 C). The International Equation of State of Seawater 1980 (EOS-80, UNESCO, 1981) and the Practical Salinity Scale (PSS-78) were both based on IPTS-68, while the Thermodynamic Equation of Seawater 2010 (TEOS-10) is based on ITS-90. References: Barber, 1969, doi: 10.1088/0026-1394/5/2/001; UNESCO, 1981; Saunders, 1990, WOCE Newsletter, 10, September 1990.
tendency_of_specific_humidity"tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
tendency_of_specific_humidity_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
tendency_of_specific_humidity_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
tendency_of_specific_humidity_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
tendency_of_specific_humidity_due_to_model_physicsThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.
tendency_of_specific_humidity_due_to_stratiform_cloud_and_precipitation_and_boundary_layer_mixingSpecific humidity is the mass fraction of water vapor in (moist) air. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. "specific" means per unit mass.
tendency_of_specific_humidity_due_to_stratiform_precipitation
alias: tendency_of_specific_humidity_due_to_large_scale_precipitation
Specific humidity is the mass fraction of water vapor in (moist) air. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Tendency_of_X" means derivative of X with respect to time. "Specific" means per unit mass.
tendency_of_surface_air_pressureThe surface called "surface" means the lower boundary of the atmosphere. "tendency_of_X" means derivative of X with respect to time.
tendency_of_surface_snow_amountThe surface called "surface" means the lower boundary of the atmosphere. "tendency_of_X" means derivative of X with respect to time. "Amount" means mass per unit area. Surface amount refers to the amount on the ground, excluding that on the plant or vegetation canopy.
tendency_of_troposphere_moles_of_carbon_monoxide
alias: tendency_of_moles_of_carbon_monoxide_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of carbon monoxide is CO.
tendency_of_troposphere_moles_of_hcc140a
alias: tendency_of_moles_of_hcc140a_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of HCC140a is CH3CCl3. The IUPAC name for HCC140a is 1,1,1-trichloroethane.
tendency_of_troposphere_moles_of_hcfc22
alias: tendency_of_moles_of_hcfc22_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of HCFC22 is CHClF2. The IUPAC name for HCFC 22 is chloro-difluoro-methane.
tendency_of_troposphere_moles_of_methane
alias: tendency_of_moles_of_methane_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methane is CH4. Methane is a member of the group of hydrocarbons known as alkanes. There are standard names for the alkane group as well as for some of the individual species.
tendency_of_troposphere_moles_of_methyl_bromide
alias: tendency_of_moles_of_methyl_bromide_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methyl bromide is CH3Br. The IUPAC name for methyl bromide is bromomethane.
tendency_of_troposphere_moles_of_methyl_chloride
alias: tendency_of_moles_of_methyl_chloride_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of methyl chloride is CH3Cl. The IUPAC name for methyl chloride is chloromethane.
tendency_of_troposphere_moles_of_molecular_hydrogen
alias: tendency_of_moles_of_molecular_hydrogen_in_troposphere
"tendency_of_X" means derivative of X with respect to time. "troposphere_moles_of_X" means the total number of moles of X contained in the troposphere, i.e, summed over that part of the atmospheric column and over the entire globe. The chemical formula of molecular hydrogen is H2.
tendency_of_upward_air_velocity"tendency_of_X" means derivative of X with respect to time. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.
tendency_of_upward_air_velocity_due_to_advectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. A velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.
tendency_of_wind_speed_due_to_convectionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.
tendency_of_wind_speed_due_to_gravity_wave_dragThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.
thermal_energy_content_of_surface_snow
alias: snow_thermal_energy_content
"Content" indicates a quantity per unit area. Thermal energy is the total vibrational energy, kinetic and potential, of all the molecules and atoms in a substance. The surface called "surface" means the lower boundary of the atmosphere.
thermodynamic_phase_of_cloud_water_particles_at_cloud_top"cloud_top" refers to the top of the highest cloud. "Water" means water in all phases. A variable with the standard name of thermodynamic_phase_of_cloud_water_particles_at_cloud_top contains integers which can be translated to strings using flag_values and flag_meanings attributes. Alternatively, the data variable may contain strings which indicate the thermodynamic phase. These strings are standardised. Values must be chosen from the following list: liquid; ice; mixed.
thickness_of_convective_rainfall_amount"Amount" means mass per unit area. The construction thickness_of_[X_]rainfall_amount means the accumulated "depth" of rainfall i.e. the thickness of a layer of liquid water having the same mass per unit area as the rainfall amount.
thickness_of_convective_snowfall_amount"Amount" means mass per unit area. The construction thickness_of_[X_]snowfall_amount means the accumulated "depth" of snow which fell i.e. the thickness of the layer of snow at its own density. There are corresponding standard names for liquid water equivalent (lwe) thickness.
thickness_of_liquid_water_cloud"Thickness" means the vertical extent of a layer.
thickness_of_rainfall_amount"Amount" means mass per unit area. The construction thickness_of_[X_]rainfall_amount means the accumulated "depth" of rainfall i.e. the thickness of a layer of liquid water having the same mass per unit area as the rainfall amount.
thickness_of_snowfall_amount"Amount" means mass per unit area. The construction thickness_of_[X_]snowfall_amount means the accumulated "depth" of snow which fell i.e. the thickness of the layer of snow at its own density. There are corresponding standard names for liquid water equivalent (lwe) thickness.
thickness_of_stratiform_rainfall_amount
alias: thickness_of_large_scale_rainfall_amount
"Amount" means mass per unit area. The construction thickness_of_[X_]rainfall_amount means the accumulated "depth" of rainfall i.e. the thickness of a layer of liquid water having the same mass per unit area as the rainfall amount. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
thickness_of_stratiform_snowfall_amount
alias: thickness_of_large_scale_snowfall_amount
"Amount" means mass per unit area. The construction thickness_of_[X_]snowfall_amount means the accumulated "depth" of snow which fell i.e. the thickness of the layer of snow at its own density. There are corresponding standard names for liquid water equivalent (lwe) thickness. Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud.
thunderstorm_probability"probability_of_X" means the chance that X is true or of at least one occurrence of X. Space and time coordinates must be used to indicate the area and time-interval to which a probability applies.
time
No help available.
time_sample_difference_due_to_collocationtime_sample_difference_due_to_collocation is the difference in time between two events that are collocated. Two events are deemed to be collocated based on some set of spatial, temporal, and viewing geometry criteria.
toa_adjusted_longwave_forcing"longwave" means longwave radiation. "toa" means top of atmosphere. Adjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
toa_adjusted_radiative_forcing"toa" means top of atmosphere. Adjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
toa_adjusted_shortwave_forcing"shortwave" means shortwave radiation. "toa" means top of atmosphere. Adjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
toa_bidirectional_reflectance"Bidirectional_reflectance" depends on the angles of incident and measured radiation. Reflectance is the ratio of the energy of the reflected to the incident radiation. A coordinate variable of radiation_wavelength or radiation_frequency can be used to specify the wavelength or frequency, respectively, of the radiation. "toa" means top of atmosphere. toa_bidirectional_reflectance includes a factor to account for the cosine of the solar zenith angle but does not include any integration over solid angle.
toa_brightness_temperatureThe brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area. "toa" means top of atmosphere.
toa_brightness_temperature_assuming_clear_skyThe brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "toa" means top of atmosphere.
toa_brightness_temperature_bias_at_standard_scene_due_to_intercalibrationtoa_brightness_temperature_bias_at_standard_scene_due_to_intercalibration is the difference between top-of-atmosphere (TOA) brightness temperature
of the reference sensor and TOA brightness temperature of the
monitored sensor. This TOA brightness temperature difference is a measure of the calibration difference between the monitored and reference sensors. The standard scene is a target area with typical Earth surface and atmospheric conditions that is accepted as a reference. Brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area at a given wavenumber. TOA brightness temperature of the standard scene is calculated using a radiative transfer simulation for a given viewing geometry. The resultant top-of-atmosphere spectral radiance is then integrated with each sensor's spectral response function and converted to equivalent brightness temperature. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
toa_brightness_temperature_of_standard_scene"toa" means top of atmosphere. The brightness temperature of a body is the temperature of a black body which radiates the same power per unit solid angle per unit area at a given wavenumber. The standard scene is a target area with typical Earth surface and atmospheric conditions that is accepted as a reference. The toa radiance of the standard scene is calculated using a radiative transfer model for a given viewing geometry. The resultant toa spectral radiance is then integrated with a sensor's spectral response function and converted to equivalent brightness temperature.
toa_cloud_radiative_effect"toa" means top of atmosphere. Cloud radiative effect is also commonly known as "cloud radiative forcing". It is the sum of the quantities with standard names toa_shortwave_cloud_radiative_effect and toa_longwave_cloud_radiative_effect.
toa_incoming_shortwave_flux"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_instantaneous_longwave_forcing"longwave" means longwave radiation. "toa" means top of atmosphere. Instantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
toa_instantaneous_radiative_forcing"toa" means top of atmosphere. Instantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
toa_instantaneous_shortwave_forcing"shortwave" means shortwave radiation. "toa" means top of atmosphere. Instantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
toa_longwave_cloud_radiative_effect"toa" means top of atmosphere. "Longwave" means longwave radiation. Cloud radiative effect is also commonly known as "cloud radiative forcing". It is the difference in radiative flux resulting from the presence of clouds, i.e. it is the difference between toa_outgoing_longwave_flux_assuming_clear_sky and toa_outgoing_longwave_flux.
toa_net_downward_longwave_flux"longwave" means longwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_downward_longwave_flux_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_downward_radiative_flux"toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_downward_shortwave_flux"shortwave" means shortwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_downward_shortwave_flux_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_upward_longwave_flux"longwave" means longwave radiation. "toa" means top of atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_upward_longwave_flux_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_net_upward_shortwave_flux"shortwave" means shortwave radiation. "toa" means top of atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). Net upward radiation is the difference between radiation from below (upwelling) and radiation from above (downwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_longwave_flux"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_longwave_flux_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_radiance_per_unit_wavelength"toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_radiance_per_unit_wavenumber"toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_radiance_per_unit_wavenumber_mean_within_collocation_scenetoa_outgoing_radiance_per_unit_wavenumber_mean_within_collocation_scene is an average of observations of the quantity with standard name toa_outgoing_radiance_per_unit_wavenumber from a sensor's adjacent field-of-views within a collocation scene. "toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The "collocation scene" is a grouping of a sensor's adjacent field-of-views centered on a collocation target. The size of the collocation scene is typically about twice that of the collocation target. The "collocation target" is an area on the Earth's surface at which observations from at least two sensors are collected. Its size is defined by the sensor with the largest field-of-view footprint. Two events are deemed to be collocated based on some set of spatial, temporal, and viewing geometry criteria.
toa_outgoing_radiance_per_unit_wavenumber_mean_within_collocation_targettoa_outgoing_radiance_per_unit_wavenumber_mean_within_collocation_target is an average of observations of the quantity with standard name toa_outgoing_radiance_per_unit_wavenumber from a sensor's adjacent field-of-views within a collocation target. "toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The "collocation target" is an area on the Earth's surface at which observations from at least two sensors are collected. Its size is defined by the sensor with the largest field-of-view footprint. Two events are deemed to be collocated based on some set of spatial, temporal, and viewing geometry criteria.
toa_outgoing_radiance_per_unit_wavenumber_stdev_within_collocation_scenetoa_outgoing_radiance_per_unit_wavenumber_stdev_within_collocation_scene is the standard deviation of observations of the quantity with standard name toa_outgoing_radiance_per_unit_wavenumber from a sensor's adjacent field-of-views within a collocation scene. "toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The "collocation scene" is a grouping of a sensor's adjacent field-of-views centered on a collocation target. The size of the collocation scene is typically about twice that of the collocation target. The "collocation target" is an area on the Earth's surface at which observations from at least two sensors are collected. Its size is defined by the sensor with the largest field-of-view footprint. Two events are deemed to be collocated based on some set of spatial, temporal, and viewing geometry criteria.
toa_outgoing_radiance_per_unit_wavenumber_stdev_within_collocation_targettoa_outgoing_radiance_per_unit_wavenumber_stdev_within_collocation_target is the standard deviation of observations of the quantity with standard name toa_outgoing_radiance_per_unit_wavenumber from a sensor's adjacent field-of-views within a collocation target. "toa" means top of atmosphere. The TOA outgoing radiance is the upwelling radiance, i.e., toward outer space. Radiance is the radiative flux in a particular direction, per unit of solid angle. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The "collocation target" is an area on the Earth's surface at which observations from at least two sensors are collected. Its size is defined by the sensor with the largest field-of-view footprint. Two events are deemed to be collocated based on some set of spatial, temporal, and viewing geometry criteria.
toa_outgoing_shortwave_flux"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_outgoing_shortwave_flux_assuming_clear_skyA phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
toa_shortwave_cloud_radiative_effect"toa" means top of atmosphere. "Shortwave" means shortwave radiation. Cloud radiative effect is also commonly known as "cloud radiative forcing". It is the difference in radiative flux resulting from the presence of clouds, i.e. the difference between toa_net_downward_shortwave_flux and toa_net_downward_shortwave_flux_assuming_clear_sky.
tracer_lifetimeThe quantity with standard name tracer_lifetime is the total length of time a passive tracer exists within a medium. Passive tracers are used in models to study processes such as transport and deposition.
transpiration_amount"Amount" means mass per unit area.
transpiration_fluxIn accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
tropopause_adjusted_longwave_forcing"longwave" means longwave radiation. Adjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
tropopause_adjusted_radiative_forcingAdjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
tropopause_adjusted_shortwave_forcing"shortwave" means shortwave radiation. Adjusted forcing is the radiative flux change caused by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.) after allowance for stratospheric temperature adjustment.
tropopause_air_pressure
No help available.
tropopause_air_temperatureAir temperature is the bulk temperature of the air, not the surface (skin) temperature.
tropopause_altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.
tropopause_downwelling_longwave_flux"longwave" means longwave radiation. Downwelling radiation is radiation from above. It does not mean "net downward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
tropopause_instantaneous_longwave_forcing"longwave" means longwave radiation. Instantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
tropopause_instantaneous_radiative_forcingInstantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
tropopause_instantaneous_shortwave_forcing"shortwave" means shortwave radiation. Instantaneous forcing is the radiative flux change caused instantaneously by an imposed change in radiative forcing agent (greenhouse gases, aerosol, solar radiation, etc.).
tropopause_net_downward_longwave_flux"longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
tropopause_net_downward_shortwave_flux"shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
tropopause_upwelling_shortwave_flux"shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
troposphere_mole_content_of_bromine_monoxide"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for bromine_monoxide is BrO.
troposphere_mole_content_of_formaldehyde"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for formaldehyde is CH2O. The IUPAC name for formaldehyde is methanal.
troposphere_mole_content_of_glyoxal"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for glyoxal is CHOCHO. The IUPAC name for glyoxal is ethanedial.
troposphere_mole_content_of_iodine_monoxide"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for iodine_monoxide is IO.
troposphere_mole_content_of_nitrogen_dioxide"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for nitrogen_dioxide is NO2.
troposphere_mole_content_of_ozone"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for ozone is O3. The IUPAC name for ozone is trioxygen.
troposphere_mole_content_of_sulfur_dioxide"Content" indicates a quantity per unit area. The "troposphere content" of a quantity refers to the vertical integral from the surface to the tropopause. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. The chemical formula for suflur_dioxide is SO2.
upward_air_velocityA velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward). Upward air velocity is the vertical component of the 3D air velocity vector.
upward_dry_static_energy_flux_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Upward" indicates a vector component which is positive when directed upward (negative downward). Dry static energy is the sum of enthalpy and potential energy (itself the sum of gravitational and centripetal potential energy). Enthalpy can be written either as (1) CpT, where Cp is heat capacity at constant pressure, T is absolute temperature, or (2) U+pV, where U is internal energy, p is pressure and V is volume. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_eastward_momentum_flux_in_air_due_to_nonorographic_eastward_gravity_waves
alias: upward_flux_of_eastward_momentum_due_to_nonorographic_eastward_gravity_waves
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Upward" indicates a vector component which is positive when directed upward (negative downward). "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward eastward" indicates the ZX component of a tensor. An upward eastward momentum flux is an upward flux of eastward momentum, which accelerates the upper medium eastward and the lower medium westward. Momentum flux is dimensionally equivalent to stress and pressure. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The total upward eastward momentum flux due to gravity waves is the sum of the fluxes due to orographic gravity waves and nonorographic waves. The upward eastward momentum flux due to orographic gravity waves has the standard name upward_eastward_momentum_flux_in_air_due_to_orographic_gravity_waves. The total upward eastward momentum flux due to nonorographic gravity waves is the sum of the fluxes due to eastward and westward propagating waves. The latter has the standard name upward_eastward_momentum_flux_in_air_due_to_nonorographic_westward_gravity_waves.
upward_eastward_momentum_flux_in_air_due_to_nonorographic_westward_gravity_waves
alias: upward_flux_of_eastward_momentum_due_to_nonorographic_westward_gravity_waves
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Upward" indicates a vector component which is positive when directed upward (negative downward). "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward eastward" indicates the ZX component of a tensor. An upward eastward momentum flux is an upward flux of eastward momentum, which accelerates the upper medium eastward and the lower medium westward. Momentum flux is dimensionally equivalent to stress and pressure. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The total upward eastward momentum flux due to gravity waves is the sum of the fluxes due to orographic gravity waves and nonorographic waves. The upward eastward momentum flux due to orographic gravity waves has the standard name upward_eastward_momentum_flux_in_air_due_to_orographic_gravity_waves. The total upward eastward momentum flux due to nonorographic gravity waves is the sum of the fluxes due to eastward and westward propagating waves. The former has the standard name upward_eastward_momentum_flux_in_air_due_to_nonorographic_eastward _gravity_waves.
upward_eastward_momentum_flux_in_air_due_to_orographic_gravity_waves
alias: upward_flux_of_eastward_momentum_due_to_orographic_gravity_waves
The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Upward" indicates a vector component which is positive when directed upward (negative downward). "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward eastward" indicates the ZX component of a tensor. An upward eastward momentum flux is an upward flux of eastward momentum, which accelerates the upper medium eastward and the lower medium westward. Momentum flux is dimensionally equivalent to stress and pressure. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The total upward eastward momentum flux due to gravity waves is the sum of the fluxes due to orographic gravity waves and nonorographic waves. The total upward eastward momentum flux due to nonorographic gravity waves is the sum of the fluxes due to eastward and westward propagating waves. These quantities have the standard names upward_eastward_momentum_flux_in_air_due_to_nonorographic_eastward_gravity_waves and upward_eastward_momentum_flux_in_air_due_to_nonorographic_westward_gravity_waves, respectively.
upward_eastward_stress_at_sea_ice_base"Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Upward" indicates a vector component which is positive when directed upward (negative downward). "Upward eastward" indicates the ZX component of a tensor. An upward eastward stress is an upward flux of eastward momentum, which accelerates the upper medium eastward and the lower medium westward.
upward_eliassen_palm_flux_in_air
alias: upward_eliassen_palm_flux
"Eliassen Palm flux" is a widely used vector in the meridional plane, and the divergence of this flux appears as a forcing in the Transformed Eulerian mean formulation of the zonal mean zonal wind equation. "Upward" indicates a vector component which is positive when directed upward (negative downward).
upward_geothermal_heat_flux_at_sea_floor"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_heat_flux_at_ground_level_in_snowground_level means the land surface (beneath the snow and surface water, if any). "Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_heat_flux_at_ground_level_in_soilground_level means the land surface (beneath the snow and surface water, if any). "Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_heat_flux_in_air"Upward" indicates a vector component which is positive when directed upward (negative downward). The vertical heat flux in air is the sum of all heat fluxes i.e. radiative, latent and sensible. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_heat_flux_in_sea_water_due_to_convection"Upward" indicates a vector component which is positive when directed upward (negative downward). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_latent_heat_flux_in_air"Upward" indicates a vector component which is positive when directed upward (negative downward). The latent heat flux is the exchange of heat across a surface on account of evaporation and condensation (including sublimation and deposition). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_mass_flux_of_air"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_northward_stress_at_sea_ice_base"Northward" indicates a vector component which is positive when directed northward (negative southward). "Upward" indicates a vector component which is positive when directed upward (negative downward). "Upward northward" indicates the ZY component of a tensor. An upward northward stress is an upward flux of northward momentum, which accelerates the upper medium northward and the lower medium southward.
upward_ocean_mass_transport"Upward" indicates a vector component which is positive when directed upward (negative downward).
upward_sea_ice_basal_heat_flux"Upward" indicates a vector component which is positive when directed upward (negative downward). The sea ice basal heat flux is the vertical heat flux (apart from radiation i.e. "diffusive") in sea water at the base of the sea ice. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_sea_water_velocityA velocity is a vector quantity. "Upward" indicates a vector component which is positive when directed upward (negative downward).
upward_sensible_heat_flux_in_air"Upward" indicates a vector component which is positive when directed upward (negative downward). The sensible heat flux, also called "turbulent" heat flux, is the exchange of heat caused by the motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_water_vapor_flux_in_air"Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_water_vapor_flux_in_air_due_to_diffusionThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Upward" indicates a vector component which is positive when directed upward (negative downward). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upward_x_stress_at_sea_ice_base"x" indicates a vector component along the grid x-axis, positive with increasing x. "Upward" indicates a vector component which is positive when directed upward (negative downward).
upward_y_stress_at_sea_ice_base"y" indicates a vector component along the grid y-axis, positive with increasing y. "Upward" indicates a vector component which is positive when directed upward (negative downward).
upwelling_longwave_flux_in_air"longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upwelling_longwave_flux_in_air_assuming_clear_skyUpwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation.
upwelling_longwave_radiance_in_air"longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
upwelling_radiance_per_unit_wavelength_in_air
alias: upwelling_spectral_radiance_in_air
Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
upwelling_radiative_flux_per_unit_wavelength_in_air
alias: upwelling_spectral_radiative_flux_in_air
Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
upwelling_radiative_flux_per_unit_wavelength_in_sea_water
alias: upwelling_spectral_radiative_flux_in_sea_water
Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A coordinate variable for radiation wavelength should be given the standard name radiation_wavelength.
upwelling_shortwave_flux_in_air"shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
upwelling_shortwave_flux_in_air_assuming_clear_skyUpwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation.
upwelling_shortwave_radiance_in_air"shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". Radiance is the radiative flux in a particular direction, per unit of solid angle. The direction towards which it is going must be specified, for instance with a coordinate of zenith_angle. If the radiation does not depend on direction, a standard name of isotropic radiance should be chosen instead.
vegetation_area_fraction"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Vegetation" means any plants e.g. trees, shrubs, grass.
vegetation_carbon_content"Content" indicates a quantity per unit area. "Vegetation" means any plants e.g. trees, shrubs, grass.
vertical_component_of_ocean_xy_tracer_diffusivityThe vertical_component_of_ocean_xy_tracer_diffusivity means the vertical component of the diffusivity of tracers in the ocean due to lateral mixing. This quantity could appear in formulations of lateral diffusivity in which "lateral" does not mean "iso-level", e.g. it would not be used for isopycnal diffusivity. "Tracer diffusivity" means the diffusivity of heat and salinity due to motion which is not resolved on the grid scale of the model.
virtual_salt_flux_correctionThe virtual_salt_flux_into_sea_water_due_to_process is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_process. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
virtual_salt_flux_into_sea_waterThe virtual_salt_flux_into_sea_water is the salt flux that would have the same effect on the sea surface salinity as the water_flux_out_of_sea_water. It includes the effects of precipitation, evaporation, river outflow, sea-ice and any water flux relaxation(s) and correction(s) that may have been applied. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
virtual_salt_flux_into_sea_water_due_to_evaporationThe virtual_salt_flux_into_sea_water_due_to_process is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_process. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
virtual_salt_flux_into_sea_water_due_to_newtonian_relaxationThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The virtual_salt_flux_into_sea_water_due_to_newtonian_relaxation is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_newtonian_relaxation. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
virtual_salt_flux_into_sea_water_due_to_rainfallThe virtual_salt_flux_into_sea_water_due_to_process is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_process. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
virtual_salt_flux_into_sea_water_due_to_sea_ice_thermodynamicsThe virtual_salt_flux_into_sea_water_due_to_process is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_process. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Sea ice thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes, i.e., due to melting, sublimation and fusion.
virtual_salt_flux_into_sea_water_from_riversThe virtual_salt_flux_into_sea_water_due_to_process is the salt flux that would have the same effect on the sea surface salinity as water_flux_out_of_sea_water_due_to_process. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
virtual_temperatureThe virtual temperature of air is the temperature at which the dry air constituent of a parcel of moist air would have the same density as the moist air at the same pressure.
visibility_in_airThe visibility is the distance at which something can be seen.
volume_absorption_coefficient_in_air_due_to_dried_aerosol_particlesThe volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with "specific_" instead of "volume_". The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths unless a coordinate of "radiation_wavelength" or "radiation_frequency" is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (relative humidity less than 40 per cent) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
volume_absorption_coefficient_of_radiative_flux_in_sea_waterRadiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength.
volume_absorption_coefficient_of_radiative_flux_in_sea_water_due_to_dissolved_organic_matterThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. Radiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength.
volume_attenuated_backwards_scattering_function_in_airAttenuation is the sum of absorption and scattering. Attenuation is sometimes called "extinction". The attenuated backwards scattering function includes the effects of two-way attenuation by the medium between a radar source and receiver. The volume scattering function is the fraction of incident radiative flux scattered into unit solid angle per unit path length. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity.
volume_attenuated_backwards_scattering_function_in_air_assuming_no_aerosol_or_cloudAttenuation is the sum of absorption and scattering. Attenuation is sometimes called "extinction". The attenuated backwards scattering function includes the effects of two-way attenuation by the medium between a radar source and receiver. The volume scattering function is the fraction of incident radiative flux scattered into unit solid angle per unit path length. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity. A phrase "assuming_condition" indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself.
volume_attenuation_coefficient_of_downwelling_radiative_flux_in_sea_waterDownwelling radiation is radiation from above. It does not mean "net downward". Radiative flux is the sum of shortwave and longwave radiative fluxes. When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Attenuation is the sum of absorption and scattering. Attenuation is sometimes called "extinction". Also called "diffuse" attenuation, the attenuation of downwelling radiative flux refers to the decrease with decreasing height or increasing depth of the downwelling component of radiative flux, regardless of incident direction.
volume_backwards_scattering_coefficient_in_air_due_to_dried_aerosol_particlesThe volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeds pi/2 radians. A scattering_angle should not be specified with this quantity. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state, but that the dry state (relative humidity less than 40 per cent) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
volume_backwards_scattering_coefficient_of_radiative_flux_in_sea_waterRadiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Scattering of radiation is its deflection from its incident path without loss of energy. Backwards scattering refers to the sum of scattering into all backward angles i.e. scattering_angle exceeding pi/2 radians. A scattering_angle should not be specified with this quantity.
volume_beam_attenuation_coefficient_of_radiative_flux_in_sea_waterRadiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Attenuation is the sum of absorption and scattering. Attenuation is sometimes called "extinction". Beam attenuation refers to the decrease of radiative flux along the direction of the incident path. It is distinguished from attenuation of the downwelling component of radiative flux from any incident direction, also called "diffuse" attenuation.
volume_extinction_coefficient_in_air_due_to_ambient_aerosol_particles
alias: volume_extinction_coefficient_in_air_due_to_ambient_aerosol
The volume extinction coefficient is the fractional change of radiative flux per unit path length. Extinction is the sum of absorption and scattering, sometimes called "attenuation". "Extinction" is the term most commonly used at optical wavelengths whereas "attenuation" is more often used at radio and radar wavelengths. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exists in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
volume_fraction_of_clay_in_soil"Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_fraction_of_condensed_water_in_soil
alias: volume_fraction_of_water_in_soil
"Condensed water" means liquid and ice. "Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_fraction_of_condensed_water_in_soil_at_critical_point
alias: volume_fraction_of_water_in_soil_at_critical_point
"Condensed water" means liquid and ice. "Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y. When soil moisture equals or exceeds the critical point evapotranspiration takes place at the potential rate and is controlled by the ambient meteorological conditions (temperature, wind, relative humidity). Evapotranspiration is the sum of evaporation and plant transpiration. Potential evapotranspiration is the rate at which evapotranspiration would occur under ambient conditions from a uniformly vegetated area when the water supply is not limiting.
volume_fraction_of_condensed_water_in_soil_at_field_capacity
alias: volume_fraction_of_water_in_soil_at_field_capacity
"Condensed water" means liquid and ice. "Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y. The field capacity of soil is the maximum content of water it can retain against gravitational drainage.
volume_fraction_of_condensed_water_in_soil_at_wilting_point
alias: volume_fraction_of_water_in_soil_at_wilting_point
"Condensed water" means liquid and ice. "Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y. The wilting point of soil is the water content below which plants cannot extract sufficient water to balance their loss through transpiration.
volume_fraction_of_condensed_water_in_soil_pores"Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y. "Condensed water" means liquid and ice. "Volume_fraction_of_condensed_water_in_soil_pores" is the ratio of the volume of condensed water in soil pores to the volume of the pores themselves.
volume_fraction_of_frozen_water_in_soil"frozen_water" means ice. "Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_fraction_of_oxygen_in_sea_water"Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_fraction_of_sand_in_soil"Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_fraction_of_silt_in_soil"Volume fraction" is used in the construction volume_fraction_of_X_in_Y, where X is a material constituent of Y.
volume_mixing_ratio_of_oxygen_at_stp_in_sea_water"ratio_of_X_to_Y" means X/Y. "stp" means standard temperature (0 degC) and pressure (101325 Pa).
volume_scattering_coefficient_in_air_due_to_ambient_aerosol_particlesThe volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with "specific_" instead of "volume_". The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths unless a coordinate of "radiation_wavelength" or "radiation_frequency" is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Ambient_aerosol" means that the aerosol is measured or modelled at the ambient state of pressure, temperature and relative humidity that exist in its immediate environment. "Ambient aerosol particles" are aerosol particles that have taken up ambient water through hygroscopic growth. The extent of hygroscopic growth depends on the relative humidity and the composition of the particles. To specify the relative humidity at which the quantity described by the standard name applies, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
volume_scattering_coefficient_in_air_due_to_dried_aerosol_particlesThe volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with "specific_" instead of "volume_". The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths unless a coordinate of "radiation_wavelength" or "radiation_frequency" is included to specify the wavelength. "Aerosol" means the system of suspended liquid or solid particles in air (except cloud droplets) and their carrier gas, the air itself. "Dried_aerosol" means that the aerosol sample has been dried from the ambient state before sizing, but that the dry state (relative humidity less than 40 per cent) has not necessarily been reached. To specify the relative humidity at which the sample was measured, provide a scalar coordinate variable with the standard name of "relative_humidity". The specification of a physical process by the phrase "due_to_" process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase.
volume_scattering_coefficient_of_radiative_flux_in_sea_waterRadiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The volume scattering/absorption/attenuation coefficient is the fractional change of radiative flux per unit path length due to the stated process. Coefficients with canonical units of m2 s-1 i.e. multiplied by density have standard names with specific_ instead of volume_. The scattering/absorption/attenuation coefficient is assumed to be an integral over all wavelengths, unless a coordinate of radiation_wavelength is included to specify the wavelength. Scattering of radiation is its deflection from its incident path without loss of energy. The (range of) direction(s) of scattering can be specified by a coordinate of scattering_angle.
volume_scattering_function_of_radiative_flux_in_sea_waterRadiative flux is the sum of shortwave and longwave radiative fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Scattering of radiation is its deflection from its incident path without loss of energy. The volume scattering function is the fraction of incident radiative flux scattered into unit solid angle per unit path length. The (range of) direction(s) of scattering can be specified by a coordinate of scattering_angle.
water_evaporation_amount"Amount" means mass per unit area. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)
water_evaporation_amount_from_canopy
alias: water_evaporation_amount_from_canopy_where_land
"Amount" means mass per unit area. "Water" means water in all phases. "Canopy" means the plant or vegetation canopy. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".)
water_evaporation_flux
alias: water_evaporation_flux_where_sea_ice
Water means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
water_evaporation_flux_from_canopy
alias: water_evaporation_flux_from_canopy_where_land
"Water" means water in all phases. "Canopy" means the plant or vegetation canopy. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. Unless indicated in the cell_methods attribute, a quantity is assumed to apply to the whole area of each horizontal grid box. Previously, the qualifier where_type was used to specify that the quantity applies only to the part of the grid box of the named type. Names containing the where_type qualifier are deprecated and newly created data should use the cell_methods attribute to indicate the horizontal area to which the quantity applies.
water_evaporation_flux_from_soil"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_correction"Water" means water in all phases. Flux correction is also called "flux adjustment". A positive flux correction is downward i.e. added to the ocean. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_into_sea_water
alias: water_flux_into_ocean
"Water" means water in all phases. The water flux into sea water is the freshwater entering as a result of precipitation, evaporation, river inflow, sea ice effects and water flux relaxation and correction (if applied). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_into_sea_water_due_to_sea_ice_thermodynamicsThe water flux into sea water is the freshwater entering as a result of precipitation, evaporation, river inflow, sea ice effects and water flux correction (if applied). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Sea ice thermodynamics" refers to the addition or subtraction of mass due to surface and basal fluxes, i.e., due to melting, sublimation and fusion.
water_flux_into_sea_water_from_icebergsThe water flux into sea water is the freshwater entering as a result of precipitation, evaporation, river inflow, sea ice effects and water flux correction (if applied). The water flux into sea water from icebergs is due to the melting of the iceberg. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_into_sea_water_from_rivers
alias: water_flux_into_ocean_from_rivers
"Water" means water in all phases. The water flux or volume transport into sea water from rivers is the inflow to the ocean, often applied to the surface in ocean models. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_into_sea_water_from_rivers_and_surface_downward_water_flux"Water" means water in all phases, including frozen i.e. ice and snow. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface water flux is the result of precipitation and evaporation. The water flux into sea water is the freshwater entering as a result of precipitation, evaporation, river inflow, sea ice effects and water flux correction (if applied). The water flux or volume transport into sea water from rivers is the inflow to the ocean, often applied to the surface in ocean models. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere.
water_flux_into_sea_water_without_flux_correctionWater means water in all phases. The water_flux_into_sea_water_without_flux_correction is the freshwater entering as a result of precipitation, evaporation, river inflow and sea ice effects. The total water flux including any flux relaxation(s) or correction(s) is described by the standard name water_flux_into_sea_water. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_out_of_sea_ice_and_sea_water"Water" means water in all phases. The water_flux_out_of_sea_ice_and_sea_water is the freshwater leaving the ocean as a result of precipitation, evaporation, river outflow and any water flux relaxation(s) and correction(s) that may have been applied. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_out_of_sea_waterThe quantity water_flux_out_of_sea_water is the quantity with standard name water_flux_into_sea_water multiplied by -1. "Water" means water in all phases. The water flux out of sea water is the freshwater leaving as a result of precipitation, evaporation, river outflow, sea-ice and any water flux relaxation(s) and correction(s) that may have been applied. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_out_of_sea_water_due_to_newtonian_relaxationThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The water_flux_out_of_sea_water_due_to_newtonian_relaxation is the freshwater leaving as a result of the Newtonian relaxation of the sea surface salinity. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_flux_out_of_sea_water_due_to_sea_ice_thermodynamicsThe specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "Water" means water in all phases. The water flux out of sea water is the freshwater leaving the sea water. "Sea ice thermodynamics" refers to the addition or subtraction of sea ice mass due to surface and basal fluxes. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_potential_evaporation_amount"Amount" means mass per unit area. "Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) Potential evaporation is the rate at which evaporation would take place under unaltered ambient conditions (temperature, relative humidity, wind, etc.) if the supply of water were unlimited, as if from an open water surface.
water_potential_evaporation_flux"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) Potential evaporation is the rate at which evaporation would take place under unaltered ambient conditions (temperature, relative humidity, wind, etc.) if the supply of water were unlimited, as if from an open water surface. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_sublimation_flux"Water" means water in all phases. Sublimation is the conversion of solid into vapor. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
water_surface_height_above_reference_datum'Water surface height above reference datum' means the height of the upper surface of a body of liquid water, such as sea, lake or river, above an arbitrary reference datum. The altitude of the datum should be provided in a variable with standard name water_surface_reference_datum_altitude. The surface called "surface" means the lower boundary of the atmosphere.
water_surface_reference_datum_altitudeAltitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level. 'Water surface reference datum altitude' means the altitude of the arbitrary datum referred to by a quantity with standard name 'water_surface_height_above_reference_datum'. The surface called "surface" means the lower boundary of the atmosphere.
water_vapor_partial_pressure_in_air
alias: water_vapor_pressure
The partial pressure of a gaseous constituent of air is the pressure which it alone would exert with unchanged temperature and number of moles per unit volume.
water_vapor_saturation_deficit_in_air
alias: water_vapor_saturation_deficit
Water vapor saturation deficit is the difference between the saturationwater vapor partial pressure and the actual water vapor partial pressure in air.
water_volume_transport_into_sea_water_from_rivers
alias: water_volume_transport_into_ocean_from_rivers
"Water" means water in all phases. The water flux or volume transport into sea water from rivers is the inflow to the ocean, often applied to the surface in ocean models.
wave_frequency
alias: sea_surface_wave_frequency
Frequency is the number of oscillations of a wave per unit time.
wet_bulb_temperature
No help available.
wind_from_directionWind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) In meteorological reports, the direction of the wind vector is usually (but not always) given as the direction from which it is blowing (wind_from_direction) (westerly, northerly, etc.). In other contexts, such as atmospheric modelling, it is often natural to give the direction in the usual manner of vectors as the heading or the direction to which it is blowing (wind_to_direction) (eastward, southward, etc.) "from_direction" is used in the construction X_from_direction and indicates the direction from which the velocity vector of X is coming.
wind_mixing_energy_flux_into_sea_water
alias: wind_mixing_energy_flux_into_ocean
Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
wind_speedSpeed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.
wind_speed_of_gustSpeed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity. A gust is a sudden brief period of high wind speed. In an observed timeseries of wind speed, the gust wind speed can be indicated by a cell_methods of maximum for the time-interval. In an atmospheric model which has a parametrised calculation of gustiness, the gust wind speed may be separately diagnosed from the wind speed.
wind_speed_shearSpeed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity. Wind speed shear is the derivative of wind speed with respect to height.
wind_to_directionWind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) In meteorological reports, the direction of the wind vector is usually (but not always) given as the direction from which it is blowing (wind_from_direction) (westerly, northerly, etc.). In other contexts, such as atmospheric modelling, it is often natural to give the direction in the usual manner of vectors as the heading or the direction to which it is blowing (wind_to_direction) (eastward, southward, etc.) "to_direction" is used in the construction X_to_direction and indicates the direction towards which the velocity vector of X is headed. The direction is a bearing in the usual geographical sense, measured positive clockwise from due north.
wood_carbon_content"Content" indicates a quantity per unit area.
wood_debris_carbon_content"Content" indicates a quantity per unit area. "Wood debris" means dead organic matter composed of coarse wood. It is distinct from litter.
x_derivative_of_ocean_rigid_lid_pressure"component_derivative_of_X" means the derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, whether or not they are true longitude and latitude. x_derivative_of_ocean_rigid_lid_pressure means (d/dx) of the ocean surface pressure, as derived by a rigid lid approximation, keeping the other horizontal coordinate (y, presumably) constant.
x_heat_flux_in_sea_water_due_to_advection"x" indicates a vector component along the grid x-axis, positive with increasing x. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
x_wind
alias: grid_eastward_wind
"x" indicates a vector component along the grid x-axis, positive with increasing x. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
y_derivative_of_ocean_rigid_lid_pressure"component_derivative_of_X" means the derivative of X with respect to distance in the component direction, which may be northward, southward, eastward, westward, x or y. The last two indicate derivatives along the axes of the grid, whether or not they are true longitude and latitude. y_derivative_of_ocean_rigid_lid_pressure means (d/dy) of the ocean surface pressure, as derived by a rigid lid approximation, keeping the other horizontal coordinate (x, presumably) constant.
y_heat_flux_in_sea_water_due_to_advection"y" indicates a vector component along the grid y-axis, positive with increasing y. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.
y_wind
alias: grid_northward_wind
"y" indicates a vector component along the grid y-axis, positive with increasing y. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)
zenith_angleZenith angle is the angle to the local vertical; a value of zero is directly overhead.